Advantech PCA-6276 Bedienungsanleitung

PCA-6276

Full-size dual Socket 370

Intel®Celeron™

processor-based PCI/ISA-bus

CPU card

User's Manual

This document is copyrighted, 2000, by Advantech Co., Ltd. All

rights are reserved. Advantech Co., Ltd. reserves the right to make

improvements to the products described in this manual at any time

without notice.

No part of this manual may be reproduced, copied, translated or

transmitted in any form or by any means without the prior written

permission of Advantech Co., Ltd. Information provided in this

manual is intended to be accurate and reliable. However, Advantech

Co., Ltd. assumes no responsibility for its use, nor for any in-

fringements upon the rights of third parties which may result from its

use.

Acknowledgements

• AWARD is a trademark of AWARD Software, Inc.

• IBM and PC are trademarks of International Business Machines

Corporation.

• Intel and Celeron are trademarks of Intel Corporation.

• MS-DOS is a trademark of Microsoft Corporation.

• SMC is a trademark of Standard Microsystems Corporation.

• WinBond is a trademark of Winbond Corporation.

• ATI is a registered trademark of ATI Technologies, Inc.

All other product names or trademarks are the properties of their

respective owners.

Part No. 2006627600

1st Edition Printed in Taiwan January 2000

A Message to the Customer

Advantech customer services

Each and every Advantech product is built to the most exacting

specifications to ensure reliable performance in the harsh and

demanding conditions typical of industrial environments. Whether

your new Advantech equipment is destined for the laboratory or the

factory floor, you can be assured that your product will provide the

reliability and ease of operation for which the name Advantech has

come to be known.

Your satisfaction is our primary concern. Here is a guide to

Advantech’s customer services. To ensure you get the full benefit of

our services, please follow the instructions below carefully.

Technical support

We want you to get the maximum performance from your products.

So if you run into technical difficulties, we are here to help. For the

most frequently asked questions, you can easily find answers in your

product documentation. These answers are normally a lot more

detailed than the ones we can give over the phone.

So please consult this manual first. If you still cannot find the answer,

gather all the information or questions that apply to your problem, and

with the product close at hand, call your dealer. Our dealers are well

trained and ready to give you the support you need to get the most

from your Advantech products. In fact, most problems reported are

minor and are able to be easily solved over the phone.

In addition, free technical support is available from Advantech

engineers every business day. We are always ready to give advice on

application requirements or specific information on the installation

and operation of any of our products.

PCA-6276 Series comparison table

Model PCA-6276V PCA-6276VE

CPU:Dual Intel CeleronTM Socket 370 Yes Yes

System chipset:Intel 440 BX Yes Yes

BIOS:Award P&P Flash BIOS Yes Yes

L2 cache:128 KB (on CPU) Yes Yes

Max. system RAM:1 GB

(4 x 168-pin DIMM sockets) Yes Yes

ISA High Drive: Up to 64 mA Yes Yes

USB port Yes Yes

2 EIDE connectors Yes Yes

2 serial, 1 parallel ports Yes Yes

VGA:AGP/VGA (ATI3D Rage XL) Yes Yes

LAN:10/100Base-T Ethernet

(Intel82559 chipset) -Yes

Product warranty

Advantech warrants to you, the original purchaser, that each of its

products will be free from defects in materials and workmanship for

one year from the date of purchase.

This warranty does not apply to any products which have been

repaired or altered by persons other than repair personnel authorized

by Advantech, or which have been subject to misuse, abuse, accident

or improper installation. Advantech assumes no liability under the

terms of this warranty as a consequence of such events.

If an Advantech product is defective, it will be repaired or replaced at

no charge during the warranty period. For out-of-warranty repairs,

you will be billed according to the cost of replacement materials,

service time and freight. Please consult your dealer for more details.

If you think you have a defective product, follow these steps:

1. Collect all the information about the problem encountered. (For

example, type of PC, CPU speed, Advantech products used, other

hardware and software used, etc.) Note anything abnormal and list

any on-screen messages you get when the problem occurs.

2. Call your dealer and describe the problem. Please have your

manual, product, and any helpful information readily available.

3. If your product is diagnosed as defective, obtain an RMA (return

material authorization) number from your dealer. This allows us to

process your return more quickly.

4. Carefully pack the defective product, a fully-completed Repair and

Replacement Order Card and a photocopy proof of purchase date

(such as your sales receipt) in a shippable container. A product

returned without proof of the purchase date is not eligible for

warranty service.

5. Write the RMA number visibly on the outside of the package and

ship it prepaid to your dealer.

Initial Inspection

Before you begin installing your card, please make sure that the

following materials have been shipped:

• 1 PCA-6276 Socket 370 Intel®Celeron™ processor-based single

board computer

• 2 Intel®Celeron™ processors, and 2 cooling fans (optional)

• 1 PCA-6276 User's Manual

• Utility disks/CD with VGA BIOS

• Ethernet driver disks/CD (PCA-6276VE only)

• Bus Master utility driver/CD

• Disks/CD for OBS Win95/98/NT drivers

• 1 FDD cable

• 2 EIDE HDD cables

• 1 printer (parallel port) cable and 1 serial port cable

• 1 ivory cable for PS/2 keyboard and PS/2 mouse

• 1 USB cable (optional, part no. 1700100170)

• 1 ATX-to-PS/2 power cable

If any of these items are missing or damaged, contact your distributor

or sales representative immediately.

We have carefully inspected the PCA-6276 mechanically and

electrically before shipment. It should be free of marks and scratches

and in perfect working order upon receipt.

As you unpack the PCA-6276, check it for signs of shipping damage.

(For example, damaged box, scratches, dents, etc.) If it is damaged or

it fails to meet the specifications, notify our service department or

your local sales representative immediately. Also notify the carrier.

Retain the shipping carton and packing material for inspection by the

carrier. After inspection, we will make arrangements to repair or

replace the unit.

Contents

Chapter 1 Hardware Configuration.............................. 1

1.1 Introduction........................................................................2

1.2 Features...............................................................................3

1.3 Specifications ......................................................................4

1.3.1 System.........................................................................4

1.3.2 Memory.......................................................................4

1.3.3 Input/Output ................................................................4

1.3.4 VGA interface .............................................................5

1.3.5 Ethernet LAN (PCA-6276VE only)............................5

1.3.6 Industrial features .......................................................5

1.3.7 Mechanical and environmental specifications............6

1.4 Board Layout: Main Features ..........................................7

1.5 Jumpers and Connectors...................................................8

1.6 Board Layout: Jumper and Connector..............................

Locations .....................................................................................10

1.7 Safety Precautions............................................................11

1.8 Jumper Settings................................................................12

1.8.1 How to set jumpers ...................................................12

1.8.2 CMOS clear (J1) .......................................................12

1.8.3 Watchdog timer output (J2) ......................................13

1.9 System Memory................................................................14

1.9.1 Sample calculation: DIMM memory capacity..........14

1.9.2 Supplementary information about DIMMs ..............15

1.10 Memory Installation Procedures ....................................16

1.11 Cache Memory .................................................................16

1.12 CPU Installation...............................................................17

1.13 Dual Processor Systems...................................................18

Chapter 2 Connecting Peripherals ............................ 19

2.1 Primary (CN1) and Secondary (CN2) IDE Connectors20

2.2 Floppy Drive Connector (CN3).......................................21

2.3 Parallel Port Connector (CN4) .......................................21

2.4 USB Connector (CN6) .....................................................22

2.5 VGA Connector (CN7) ....................................................23

2.6 Ethernet Connector (CN8) ..............................................23

2.7 Serial Ports (CN9: COM1; CN10: COM2)....................24

2.8 PS/2 Keyboard and Mouse Connector (CN11) .............25

2.9 External Keyboard Connector (CN12) ..........................25

2.10 IR Connector (CN13).......................................................26

2.11 CPU Fan Connectors (CN14, CN24) ..............................26

2.12 Front Panel Connectors

(CN16, CN17, CN18, CN19 and CN21)..........................27

2.12.1 Keyboard lock and power on LED (CN16) ............27

2.12.2 External speaker (CN17).........................................27

2.12.3 Reset (CN18)...........................................................27

2.12.4 IDE LED (CN19) ....................................................28

2.12.5 ATX soft power switch (CN21)..............................28

2.13 ATX Power Control Connectors (CN20 and CN21).....28

2.13.1 ATX feature connector (CN20) and soft power

switch connector (CN21)........................................28

2.13.2 Controlling the soft power switch...........................29

2.14 Hardware Monitor Alarm (CN22) .................................29

Chapter 3 Award BIOS Setup ..................................... 31

3.1 Introduction......................................................................32

3.2 Entering Setup..................................................................32

3.3 Standard CMOS Setup....................................................33

3.4 BIOS Features Setup .......................................................34

3.4.1 Virus Warning...........................................................34

3.4.2 Boot Sequence...........................................................35

3.4.3 Boot Up Floppy Seek ................................................35

3.4.4 Boot Up NumLock Status .........................................36

3.4.5 Gate A20 Option .......................................................36

3.4.6 Typematic Rate Setting.............................................36

3.4.7 Typematic Rate (Chars/Sec) .....................................36

3.4.8 Typematic Delay (msec) ...........................................36

3.4.9 Security Option .........................................................36

3.4.10 PCI/VGA Palette Snoop..........................................37

3.4.11 OS Select for DRAM > 64MB................................37

3.4.12 Video BIOS Shadow ...............................................37

3.4.13 C8000-CBFFF Shadow / DC000-DFFFF Shadow .37

3.5 Chipset Features Setup....................................................38

3.5.1 SDRAM RAS to CAS Delay ....................................38

3.5.2 SDRAM RAS Precharge Time .................................38

3.5.3 SDRAM CAS Latency Time ....................................39

3.5.4 DRAM Data Integrity Mode .....................................39

3.5.5 16 Bit I/O Recovery Time / 8 Bit I/O Recovery

Time ..........................................................................39

3.5.6 Memory Hole At 15M-16M .....................................39

3.5.7 AGP Aperture Size (MB)..........................................39

3.6 Power Management Setup ..............................................40

3.6.1 Power Management ..................................................40

3.6.2 HDD Power Down ....................................................40

3.6.3 Soft-Off by PWR-BTTN...........................................41

3.7 PCI Configuration Setup.................................................41

3.7.1 IRQ-xx assigned to : PCI/ISA PnP ...........................41

3.7.2 DMA-x assigned to : PCI/ISA PnP...........................42

3.8 Load BIOS Defaults .........................................................42

3.9 Load Setup Defaults.........................................................42

3.10 Integrated Peripherals.....................................................43

3.10.1 IDE HDD Block Mode ...........................................43

3.10.2 IDE Primary Master/Slave PIO/UDMA Mode,

IDE Secondary Master/Slave PIO/UDMA Mode (Auto) .43

3.10.3 On-Chip PCI IDE Primary/Secondary....................43

3.10.4 Onboard FDC Controller ........................................44

3.10.5 Onboard Serial Port 1 (3F8H/IRQ4).......................44

3.10.6 Onboard Serial Port 2 (2F8H/IRQ3).......................44

3.10.7 Onboard Parallel Port (378H/IRQ7) .......................44

3.10.8 Parallel Port Mode (ECP + EPP) ............................44

3.10.9 ECP Mode Use DMA .............................................44

3.11 Password Setting ..............................................................45

3.12 IDE HDD Auto Detection ................................................45

3.13 Save & Exit Setup ............................................................46

3.14 Exit Without Saving.........................................................46

Chapter 4 SVGA Setup................................................ 47

4.1 Before You Begin .............................................................48

4.2 Features.............................................................................49

4.3 Installation ........................................................................49

4.4 Driver Installation............................................................50

4.4.1 Necessary prerequisites.............................................50

4.4.2 Before you begin.......................................................50

4.4.3 Changing display drivers in Windows......................50

4.4.4 Changing color schemes ...........................................50

4.5 Windows 95/98 Drivers Setup Procedure ......................51

4.6 Windows NT/98SE Drivers Setup Procedure................54

Chapter 5 LAN Configuration..................................... 57

5.1 Introduction......................................................................58

5.2 Features.............................................................................58

5.3 Driver Installation ...........................................................59

Chapter 6 Onboard Security Setup............................ 61

6.1 Introduction......................................................................62

6.2 Driver Installation............................................................63

6.2.1 Necessary prerequisites.............................................63

6.2.2 Before you begin.......................................................63

6.3 Windows 95/98/98SE Drivers Setup Procedure ............64

6.4 Windows NT Drivers Setup Procedure..........................71

Inhaltsverzeichnis

Andere Advantech Computerhardware Handbücher

Advantech

Advantech PCA-6740 Bedienungsanleitung

Advantech

Advantech AIMC-3422 Installations- und Betriebshandbuch

Advantech

Advantech PCA-6004V-00A1 Bedienungsanleitung

Advantech

Advantech MIO-2361 Series Installations- und Betriebshandbuch

Advantech

Advantech AIMB-219 Bedienungsanleitung

Advantech

Advantech PCA-6144S Bedienungsanleitung

Advantech

Advantech HPC-7420 Bedienungsanleitung

Advantech

Advantech POC-W243 Series Bedienungsanleitung

Advantech

Advantech PCA-6176 Series Bedienungsanleitung

Advantech

Advantech MIO-2375 Installations- und Betriebshandbuch

Advantech

Advantech PCA-6143P Bedienungsanleitung

Advantech

Advantech VEGA-3311 Gebrauchsanweisung

Advantech

Advantech SKY-MXM-A1000 Bedienungsanleitung

Advantech

Advantech PCLD-8811 Installations- und Betriebshandbuch

Advantech

Advantech LGA 1700 Bedienungsanleitung

Advantech

Advantech PCM-3753I Bedienungsanleitung

Advantech

Advantech IDK-2119 Series Bedienungsanleitung

Advantech

Advantech CPC-2520 Bedienungsanleitung

Advantech

Advantech SKY-MXM-T1000 Bedienungsanleitung

Advantech

Advantech VEGA-2002 Bedienungsanleitung

Advantech

Advantech ECU-479 Series Bedienungsanleitung

Advantech

Advantech PCE-5B06V-04A1E Installations- und Betriebshandbuch

Advantech

Advantech B+B SMARTWORX IE-iMcV-E1-Mux/4 Bedienungsanleitung

Advantech

Advantech MIO-2375 Bedienungsanleitung

Beliebte Computerhardware Handbücher anderer Marken

EMC2

EMC2 VNX Series Betriebsanleitung

Panasonic

Panasonic DV0PM20105 Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric Q81BD-J61BT11 Bedienungsanleitung

Gigabyte

Gigabyte B660M DS3H AX DDR4 Bedienungsanleitung

Raidon

Raidon iT2300 Bedienungsanleitung

National Instruments

National Instruments PXI-8186 Bedienungsanleitung

Hauppauge

Hauppauge WinTV-HVR-2250 Bedienungsanleitung

Kontron

Kontron CP6002 Bedienungsanleitung

Manhattan

Manhattan 702843 Bedienungsanleitung

Aphex

Aphex 230 Bedienungsanleitung

AMD

AMD Phenom II Betriebshandbuch

Intel

Intel NUC 12 Pro Bedienungsanleitung

dbx

dbx Zone Pro 1260 Bedienungsanleitung

Galaxy

Galaxy GHDX2-2430S-24F4D Bedienungsanleitung

Intel

Intel AXXRMFBU4 Bedienungsanleitung

Kontron

Kontron DIMM-PC/MD Bedienungsanleitung

ST X-NUCLEO-SAFEA1B Betriebsanleitung

STEINWAY LYNGDORF

STEINWAY LYNGDORF SP-1 Bedienungsanleitung