Advantech PCI-1730 Bedienungsanleitung

This documentation and the software included with this product are

copyrighted 2002 by Advantech Co., Ltd. All rights are reserved.

Advantech Co., Ltd. reserves the right to make improvements in the

products described in this manual at any time without notice. No part of this

manual may be reproduced, copied, translated or transmitted in any form or

by any means without the prior written permission of Advantech Co., Ltd.

Information provided in this manual is intended to be accurate and reliable.

However, Advantech Co., Ltd. assumes no responsibility for its use, nor for

any infringements of the rights of third parties which may result from its

use.

Acknowledgments

PC-LabCard is a trademark of Advantech Co., Ltd. IBM and PC are

trademarks of International Business Machines Corporation. MS-DOS,

Windows, Microsoft Visual C++ and Visual BASIC are trademarks of

Microsoft Corporation. Intel and Pentium are trademarks of Intel

Corporation. Delphi and C++ Builder are trademarks of Inprise

Corporation.

CE notification

The PCI-1730/1733/1734, developed by ADVANTECH CO., LTD., has

passed the CE test for environmental specifications when shielded cables

are used for external wiring. We recommend the use of shielded cables. This

kind of cable is available from Advantech. Please contact your local

supplier for ordering information.

On-line Technical Support

For technical support and service, please visit our support web site

Note:

✎ Concerning the environment protection, we’d like to reduce the paper

using for the user’s manual. Starting the page of Appendix C, please find

the PDF file of the CD-ROM.

Part No. 2003173000 1st Edition

Printed in Taiwan April 2002

Contents

1. INTRODUCTION..................................................................................................................1

1.1 FEATURES........................................................................................................................ 1

1.2 APPLICATIONS .................................................................................................................5

1.3 INSTALLATION GUIDE...................................................................................................... 5

1.4 SOFTWARE OVERVIEW..................................................................................................... 7

1.5 DEVICE DRIVERS PROGRAMMING ROADMAP..................................................................8

1.6 ACCESSORIES ................................................................................................................ 10

2. INSTALLATION.................................................................................................................. 11

2.1 UNPACKING................................................................................................................... 11

2.2 DRIVER INSTALLATION..................................................................................................13

2.3 HARDWARE INSTALLATION............................................................................................14

2.4 DEVICE SETUP & CONFIGURATION................................................................................ 17

3. SIGNAL CONNECTIONS.................................................................................................. 21

3.1 OVERVIEW .................................................................................................................... 21

3.2 SWITCH AND JUMPER SETTINGS.................................................................................... 21

3.3 SIGNAL CONNECTIONS ..................................................................................................26

APPENDIX A. SPECIFICATIONS........................................................................................ 37

APPENDIX B. BLOCK DIAGRAM ......................................................................................41

APPENDIX C. REGISTER STRUCTURE AND FORMAT............................................... 45

C.1 OVERVIEW.................................................................................................................... 45

C.2 I/O PORT ADDRESS MAP .............................................................................................. 45

C.3 ISOLATED DIGITAL INPUT REGISTERS -- BASE+0H/1H (/2H/3H)................................ 49

C.4 ISOLATED DIGITAL OUTPUT REGISTER- BASE+0H/1H (/2H/3H) ................................ 50

C.5 NON-ISOLATED DIGITAL INPUT REGISTERS -- BASE+2H/3H....................................... 51

C.6 NON-ISOLATED DIGITAL OUTPUT REGISTER- BASE+2H/3H .......................................51

C.7 BOARD ID — BASE+4H .............................................................................................52

C.8 INTERRUPT STATUS REGISTER — BASE+8H/CH/10H.................................................53

C.9 INTERRUPT CONTROL REGISTER — BASE+8H/CH/10H.............................................55

1. Introduction

Thank you for buying the Advantech PCI-1730/1733/1734. The

Advantech PCI-1730/1733/1734 is a 32-channel isolated digital

input/output card for the PCI bus.

For easy monitoring, each isolated digital input channel is equipped

with one red LED, and each isolated digital output channel is equipped

with one green LED to show its ON/OFF status. The PCI-1730 and PCI-

1733’s isolated digital input channels are ideal for digital input in noisy

environments or with floating potentials.

The PCI-1730/1733/1734 provides specific functions for different user

requirements:

PCI-1730 32-channel Isolated Digital I/O Card

PCI-1733 32-channel Isolated Digital Input Card

PCI-1734 32-channel Isolated Digital Output Card

The following sections of this chapter will provide further information

about features, installation guide, together with some brief information

on software and accessories for the PCI-1730/1733/1734 card.

1.1 Features

PCI-1730

❏Compatible as PCL-730

❏32 isolated DIO channels (16 inputs and 16 outputs)

❏32 TTL-level DIO channels (16 inputs and 16 outputs)

❏High output driving capacity

❏High-voltage isolation on isolated I/O channels (2,500 VDC)

❏Interrupt handling capability

❏Two 20-pin connectors for isolated digital I/O channels and two for

TTL digital I/O channels

❏D-type connector for isolated input and output channels

❏Output status read-back

❏Keep digital output values when hot system reset

❏High ESD protection (2,000 VDC)

❏High over-voltage protection (70 VDC)

❏Wide input range (5 ~ 30 VDC)

❏Board ID

PCI-1733

❏Compatible as PCL-733

❏32 isolated Digital Input channels

❏High output driving capacity

❏High-voltage isolation on isolated Input channels (2,500 VDC)

❏Interrupt handling capability

❏D-type connector for isolated input channels

❏High ESD protection (2,000 VDC)

❏High over-voltage protection (70 VDC)

❏Wide input range (5 ~ 30 VDC)

❏Board ID

PCI-1734

❏Compatible as PCL-734

❏32 isolated Digital Output channels

❏High output driving capacity

❏High-voltage isolation on isolated Output channels (2,500 VDC)

❏D-type connector for isolated input and output channels

❏Output status read-back

❏Keep digital output values when hot system reset

❏High ESD protection (2,000 VDC)

❏Board ID

The Advantech PCI-1730/1733/1734 offers the following main features:

Fully compatible as its ISA-bus product

All the specifications, connectors, pin-assignments, registries format

are the same. Users can upgrade their system into PCI bus without

change any existed wiring system.

For the existed Windows application program:

Users just need to remove the PCL-730/733/734 via the 'Device

Manager', then install the PCI-1730/1733/1734 for instead (the device

number must be the same). After that, user's original windows

application program can work with PCI-1730/1733/1734 properly.

For the existed DOS application program:

Users just need to add some statements (to get the PCI bus PCI-

1730/1733/1734 card's address and IRQ information) from our PCI-

1730/1733/1734 DOS example program into their original DOS

application program. After that, user's original DOS application

program can work with PCI-1730/1733/1734 properly.

Robust Protection

The PCI-1730/1733 digital input channels feature a robust isolation

protection for industrial, lab and machinery automation applications. It

durably withstands voltage up to 2,500 VDC, preventing your host

system from any incidental harms. If connected to an external input

source with surge-protection, the PCI-1730/1733/1734 can offer up to a

maximum of 2,000 VDC ESD (Electrostatic Discharge) protection. Even

with an input voltage rising up to 70 VDC, the PCI-1730/1733 can still

manage to work properly albeit only for short period of time.

Wide Input Range

The PCI-1730/1733 has a wide range of input voltage from 5 to 30 VDC,

and it is suitable for most industrial applications with 12 VDC, 24 VDC

input voltage.

Reset Protection Fulfills Requirement for Industrial Applications

When the system has undergone a hot reset (i.e. without turning off the

system power), the PCI-1730/1734 can either retain outputs values of

each channel, or return to its default configuration as open status,

depending on its on-board jumper setting. This function protects the

system from wrong operations during unexpected system resets.

Plug-and-Play Function

The PCI-1730/1733/1734 is a Plug-and-Play device, which fully

complies with PCI Specification Rev 2.2. During card installation, there

is no need to set jumpers or DIP switches. Instead, all bus-related

configurations such as base I/O address and interrupt are automatically

done by the Plug-and-Play function.

Board ID

The PCI-1730/1733/1734 has a built-in DIP Switch that helps define

each card’s ID when multiple PCI-1730/1733/1734 cards have been

installed on the same PC chassis. The board ID setting function is very

useful when users build their system with multiple PCI-1730/1733/1734

cards. With correct Board ID settings, you can easily identify and access

each card during hardware configuration and software programming.

Note:

✎ For detailed specifications of the PCI-1730/1733/1734, please refer to

Appendix A, Specifications.

1.2 Applications

❏Industrial ON/OFF control

❏Switch status sensing

❏BCD interfacing

❏Digital I/O control

❏Industrial and lab automation

❏Laboratory & Education

1.3 Installation Guide

Before you install your PCI-1730/1733/1734 card, please make sure you

have the following necessary components:

❏PCI-1730/1733/1734 card

❏PCI-1730/1733/1734 User’s Manual

❏Driver software Advantech DLL drivers

(included in the companion CD-ROM)

❏Wiring cable PCL-10137 (option)

❏Wiring board PCLD-880, ADAM-3937 (option)

❏Computer Personal computer or workstation with a

PCI-bus slot (running Windows 2000/95/

98/ME/NT/XP)

Some other optional components are also available for enhanced

operation:

❏Application software ActiveDAQ, GeniDAQ or other third-party

software packages

After you get the necessary components and maybe some of the

accessories for enhanced operation of your Multifunction card, you can

then begin the Installation procedures. Figure 1-1 on the next page

provides a concise flow chart to give users a broad picture of the

software and hardware installation procedures:

Fig. 1-1 Installation Flow Chart

Install Driver from CD-ROM, then power-off PC

Install Hardware and power-on PC

Use driver utility to configure hardware

Use test utility to test hardware

Read examples & driver manual

Start to write your own application

Andere Handbücher für PCI-1730

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Advantech E/A-System Handbücher

Advantech

Advantech PCI-1727U Bedienungsanleitung

Advantech

Advantech WISE-4060 Installations- und Betriebshandbuch

Advantech

Advantech USB-4702 Bedienungsanleitung

Advantech

Advantech PCL-733 Bedienungsanleitung

Advantech

Advantech PCM-27J3AU Installations- und Betriebshandbuch

Advantech

Advantech 48/24-Channel Digital Input/Output USB Module... Bedienungsanleitung

Advantech

Advantech ADAM-5000/TCP Series Bedienungsanleitung

Advantech

Advantech ADAM-3013 Bedienungsanleitung

Advantech

Advantech AMAX-5000 Series Bedienungsanleitung

Advantech

Advantech 98910770500 Installations- und Betriebshandbuch

Advantech

Advantech WISE-2200-M Installations- und Betriebshandbuch

Advantech

Advantech PCM-3753I-AE Bedienungsanleitung

Advantech

Advantech B+B SmartWorx Zlinx ZZ24D-NA-SR Bedienungsanleitung

Advantech

Advantech I/O Module 5000 Series Bedienungsanleitung

Advantech

Advantech WISE-4610 Series Bedienungsanleitung

Advantech

Advantech ECU-P1702 Installations- und Betriebshandbuch

Advantech

Advantech USB-4716 Bedienungsanleitung

Advantech

Advantech AMAX-5000 Series Bedienungsanleitung

Advantech

Advantech MIC-75G20 Installations- und Betriebshandbuch

Advantech

Advantech AIIS-1750 Installations- und Betriebshandbuch

Advantech

Advantech PCI-1750 Bedienungsanleitung

Advantech

Advantech PCIE-1756H Bedienungsanleitung

Advantech

Advantech UNO-2000-LKAE Bedienungsanleitung

Advantech

Advantech ADAM-6100EI Series Bedienungsanleitung

Beliebte E/A-System Handbücher anderer Marken

WAGO

WAGO 750-344 Bedienungsanleitung

Teknim

Teknim TWM-1887 Bedienungsanleitung

Intelligent Appliance

Intelligent Appliance IA-2662-E Bedienungsanleitung

BERGHOF

BERGHOF ECC DIO 16/16 Bedienungsanleitung

Festo

Festo CP-E08-M12-CL Bedienungsanleitung

Measurement Computing

Measurement Computing PCI-DAS64/M1/16 Bedienungsanleitung

Hitachi

Hitachi HX-RIO3 Series Bedienungsanleitung

NUUO

NUUO SCB-A08 Bedienungsanleitung

M-system

M-system R3Y-RS8 Bedienungsanleitung

jablotron

jablotron JB-110N Bedienungsanleitung

Omron

Omron SYSMAC C200H Bedienungsanleitung

DOLD

DOLD SAFEMASTER M Bedienungsanleitung

ABB

ABB OPT-MF-001 Bedienungsanleitung

Omron

Omron SYSMAC C2000H Bedienungsanleitung

Helmholz

Helmholz TB20 Bedienungsanleitung

ICP DAS USA

ICP DAS USA tM-AD2 Bedienungsanleitung

Automationdirect.com

Automationdirect.com DL305 Bedienungsanleitung

WAGO

WAGO I/O-SYSTEM 750 Bedienungsanleitung