Advantech USB-4716 Bedienungsanleitung

USB-4716

200 kS/s, 16-bit, USB

Multifunction Module

User Manual

USB-4716 User Manual ii

The documentation and the software included with this product are copy-

righted 2006 by Advantech Co., Ltd. All rights are reserved. Advantech

Co., Ltd. reserves the right to make improvements in the products

described in this manual at any time without notice. No part of this man-

ual may be reproduced, copied, translated or transmitted in any form or

by any means without the prior written permission of Advantech Co., Ltd.

Information provided in this manual is intended to be accurate and reli-

able. However, Advantech Co., Ltd. assumes no responsibility for its use,

nor for any infringements of the rights of third parties, which may result

from its use.

Acknowledgements

Intel and Pentium are trademarks of Intel Corporation.

Microsoft Windows and MS-DOS are registered trademarks of

Microsoft Corp.

All other product names or trademarks are properties of their respective

owners.

Part No. 2003471600 1st Edition

Printed in Taiwan April 2006

iii

Product Warranty (2 years)

Advantech warrants to you, the original purchaser, that each of its prod-

ucts will be free from defects in materials and workmanship for two years

from the date of purchase.

This warranty does not apply to any products which have been repaired or

altered by persons other than repair personnel authorized by Advantech,

or which have been subject to misuse, abuse, accident or improper instal-

lation. Advantech assumes no liability under the terms of this warranty as

a consequence of such events.

Because of Advantech’s high quality-control standards and rigorous test-

ing, most of our customers never need to use our repair service. If an

Advantech product is defective, it will be repaired or replaced at no

charge during the warranty period. For out-of-warranty repairs, you will

be billed according to the cost of replacement materials, service time and

freight. Please consult your dealer for more details.

If you think you have a defective product, follow these steps:

1. Collect all the information about the problem encountered. (For

example, CPU speed, Advantech products used, other hardware

and software used, etc.) Note anything abnormal and list any

onscreen messages you get when the problem occurs.

2. Call your dealer and describe the problem. Please have your man-

ual, product, and any helpful information readily available.

3. If your product is diagnosed as defective, obtain an RMA (return

merchandize authorization) number from your dealer. This allows

us to process your return more quickly.

4. Carefully pack the defective product, a fully-completed Repair and

Replacement Order Card and a photocopy proof of purchase date

(such as your sales receipt) in a shippable container. A product

returned without proof of the purchase date is not eligible for war-

ranty service.

5. Write the RMA number visibly on the outside of the package and

ship it prepaid to your dealer.

USB-4716 User Manual iv

This product has passed the CE test for environmental specifications

when shielded cables are used for external wiring. We recommend the use

of shielded cables. This kind of cable is available from Advantech. Please

contact your local supplier for ordering information.

Technical Support and Assistance

Step 1. Visit the Advantech web site at

where you can find the latest information about the product.

Step 2. Contact your distributor, sales representative, or Advantech's cus-

tomer service center for technical support if you need additional

assistance. Please have the following information ready before

you call:

- Product name and serial number

- Description of your peripheral attachments

- Description of your software (operating system, version, appli-

cation software, etc.)

- A complete description of the problem

- The exact wording of any error messages

Document Feedback

To assist us in making improvements to this manual, we would welcome

comments and constructive criticism. Please send all such - in writing to:

[email protected]

Safety Precaution - Static Electricity

Follow these simple precautions to protect yourself from harm and the

products from damage.

1. To avoid electrical shock, always disconnect the power from your

PC chassis before you work on it. Don't touch any components on

the CPU card or other cards while the PC is on.

2. Disconnect power before making any configuration changes. The

sudden rush of power as you connect a jumper or install a card may

damage sensitive electronic components.

v Table of Contents

Contents

Chapter 1 Introduction ..................................................... 2

1.1 Features ............................................................................. 2

1.2 Software Overview............................................................ 3

1.2.1 More on the CD ............................................................. 3

Chapter 2 Installation ....................................................... 6

2.1 Unpacking ......................................................................... 6

2.2 Driver Installation ............................................................. 7

2.3 Hardware Installation ........................................................ 9

2.4 Hardware Uninstallation ................................................... 9

Figure 2.1:Unplug or Eject Hardware Dialog .............. 10

Figure 2.2:Stop a Hardware device dialog box ............ 10

Chapter 3 Signal Connections ........................................ 12

3.1 Overview ......................................................................... 12

3.2 I/O Connectors ................................................................ 12

3.2.1 Pin Assignment ............................................................ 12

Figure 3.1:I/O Connector Pin Assignment .................. 13

3.2.2 I/O Connector Signal Description ................................ 14

Table 3.1:I/O Connector Signal Description ............... 14

3.2.3 LED Indicator Status Description ................................ 15

Table 3.2:LED Indicator Status Description ................ 15

3.3 Analog Input Connections............................................... 16

3.3.1 Single-ended Channel Connections ............................. 16

Figure 3.2:Single-Ended Input Channel Connection ... 16

3.3.2 Differential Input Connections .................................... 17

Figure 3.3:Differential Input Channel Connection ...... 17

3.4 Analog Output Connections (Voltage)............................ 18

Figure 3.4:Analog Output Channel Connections ......... 18

3.5 Trigger Source Connections............................................ 18

3.5.1 Internal Pacer Trigger Connection ............................... 18

3.5.2 External Trigger Source Connection ........................... 18

3.6 Field Wiring Considerations ........................................... 19

Appendix A Specifications ................................................. 22

A.1 Analog Input.................................................................... 22

A.2 Analog Output:................................................................ 23

A.3 Non-Isolated Digital Input/Output .................................. 23

A.4 Counter ............................................................................ 24

A.5 General ............................................................................ 24

USB-4716 User Manual vi

CHAPTER

Introduction

This chapter will provide information

on the features of the DAS module, a

quick start guide for installation, and

some brief information on software and

accessories for the USB-4716 Module.

Sections include:

• Features

• Software Overview

USB-4716 User Manual 2

Chapter 1 Introduction

Thank you for buying the Advantech USB-4716 data acquisition module.

The Advantech USB-4716 is a powerful data acquisition (DAS) module

for the USB port. It features a unique circuit design and complete func-

tions for data acquisition and control.

1.1 Features

USB-4716 has the most requested measurement & control functions:

• 16 single-ended/ 8 differential or combination analog input channels

• 16-bit resolution A/D converter, with up to 200 kS/s sampling rate

• 8 digital input & 8 digital output channels (TTL Level)

• 2 analog output channels

• 16-bit programmable counter/timer x 1

• Programmable gain for each analog input channel

• Automatic channel/gain scanning

• Onboard 1K samples FIFO buffer for AI channels

• Bus-powered

• Device status LED indicator

• Removable on-module wiring terminal

• Supports high-speed USB 2.0

• Auto calibration function

• Hot swappable

Note: The USB chip on your system may have a limita-

tion on the number of USB devices it will support.

Normally, only five USB-4716 devices can be

supported.

Note: The power output of an USB port is 500 mA,

while the USB-4716 requires 360 mA (typical).

This means that if an USB hub is used, it will

need an external power supply to support more

than one USB-4716 device.

3 Chapter1

1.2 Software Overview

Advantech offers a rich set of DLL drivers, third-party driver support and

application software on the companion CD-ROM to help fully exploit the

functions of your device. Advantech’s Device Drivers feature a complete

I/O function library to help boost your application performance and work

seamlessly with development tools such as Visual C++, Visual Basic,

Inprise C++ Builder, and Inprise Delphi.

1.2.1 More on the CD

For instructions on how to begin programming in each development tool,

Advantech offers some tutorial chapters in the Device Drivers Manual for

your reference. Please refer to the corresponding sections in these chap-

ters on the Device Drivers Manual to begin your programming efforts.

You can also look at the example source code provided for each program-

ming tool, since they can get you very well oriented.

The Device Drivers Manual can be found on the companion CD-ROM.

Alternatively, if you have already installed the Device Drivers on your

system, The Device Drivers Manual can be readily accessed through the

Start button:

Start/Programs/Advantech Automation/Advantech Device Manager /

Device Driver’s Manual

The example source code can be found under the corresponding installa-

tion folder such as the default installation path:

\Program Files\Advantech\ADSAPI\Examples

USB-4716 User Manual 4

Andere Handbücher für USB-4716

Inhaltsverzeichnis

Andere Advantech E/A-System Handbücher

Advantech

Advantech USB-4702 Bedienungsanleitung

Advantech

Advantech ECU-P1702 Installations- und Betriebshandbuch

Advantech

Advantech AIIS-E730 Installations- und Betriebshandbuch

Advantech

Advantech 48/24-Channel Digital Input/Output USB Module... Bedienungsanleitung

Advantech

Advantech ADAM-6100PN Series Bedienungsanleitung

Advantech

Advantech ADAM-6000 series Bedienungsanleitung

Advantech

Advantech PCL-722 Bedienungsanleitung

Advantech

Advantech PCL-720 Bedienungsanleitung

Advantech

Advantech PCI-1750 Bedienungsanleitung

Advantech

Advantech PCI-1758UDIO Installations- und Betriebshandbuch

Advantech

Advantech PCI-1750SO Bedienungsanleitung

Advantech

Advantech USB-5801 Bedienungsanleitung

Advantech

Advantech PCM-3730 Bedienungsanleitung

Advantech

Advantech PCI-1727U Bedienungsanleitung

Advantech

Advantech WISE-4610 Series Bedienungsanleitung

Advantech

Advantech B+B SmartWorx Zlinx ZZ24D-NA-SR Bedienungsanleitung

Advantech

Advantech ADAM-6050W Bedienungsanleitung

Advantech

Advantech PCL-730 Installations- und Betriebshandbuch

Advantech

Advantech PCM-27J3AU Installations- und Betriebshandbuch

Advantech

Advantech ADAM-6100EI Series Bedienungsanleitung

Advantech

Advantech PCIE-1762H Bedienungsanleitung

Advantech

Advantech WISE-2200-M Installations- und Betriebshandbuch

Advantech

Advantech PCI-1713 Bedienungsanleitung

Advantech

Advantech ADAM-6300 Series Bedienungsanleitung

Beliebte E/A-System Handbücher anderer Marken

WAGO

WAGO 750-344 Bedienungsanleitung

Teknim

Teknim TWM-1887 Bedienungsanleitung

Intelligent Appliance

Intelligent Appliance IA-2662-E Bedienungsanleitung

BERGHOF

BERGHOF ECC DIO 16/16 Bedienungsanleitung

Festo

Festo CP-E08-M12-CL Bedienungsanleitung

Measurement Computing

Measurement Computing PCI-DAS64/M1/16 Bedienungsanleitung

Hitachi

Hitachi HX-RIO3 Series Bedienungsanleitung

NUUO

NUUO SCB-A08 Bedienungsanleitung

M-system

M-system R3Y-RS8 Bedienungsanleitung

jablotron

jablotron JB-110N Bedienungsanleitung

Omron

Omron SYSMAC C200H Bedienungsanleitung

DOLD

DOLD SAFEMASTER M Bedienungsanleitung

ABB

ABB OPT-MF-001 Bedienungsanleitung

Omron

Omron SYSMAC C2000H Bedienungsanleitung

Helmholz

Helmholz TB20 Bedienungsanleitung

ICP DAS USA

ICP DAS USA tM-AD2 Bedienungsanleitung

Automationdirect.com

Automationdirect.com DL305 Bedienungsanleitung

WAGO

WAGO I/O-SYSTEM 750 Bedienungsanleitung