Agilent Technologies EPM-P Series Betriebsanleitung

Artisan Technology Group is your source for quality

new and certied-used/pre-owned equipment

• FAST SHIPPING AND

DELIVERY

• TENS OF THOUSANDS OF

IN-STOCK ITEMS

• EQUIPMENT DEMOS

• HUNDREDS OF

MANUFACTURERS

SUPPORTED

• LEASING/MONTHLY

RENTALS

• ITAR CERTIFIED

SECURE ASSET SOLUTIONS

SERVICE CENTER REPAIRS

Experienced engineers and technicians on staff

at our full-service, in-house repair center

WE BUY USED EQUIPMENT

Sell your excess, underutilized, and idle used equipment

We also offer credit for buy-backs and trade-ins

www.artisantg.com/WeBuyEquipment

REMOTE INSPECTION

Remotely inspect equipment before purchasing with

our interactive website at www.instraview.com

LOOKING FOR MORE INFORMATION?

Visit us on the web at www.artisantg.com for more

information on price quotations, drivers, technical

specications, manuals, and documentation

View

Instra

Agilent Technologies Part no. E4416-90029

November 2008

Programming Guide

Agilent Technologies

EPM-P Series Power Meters

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

ii EPM-P Series Power Meters Programming Guide

written permission is prohibited, except as allowed under the copyright

laws.

Printed in Malaysia.

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Equipment Operation

EPM-P Series Power Meters Programming Guide iii

Equipment Operation

Warnings and Cautions

This guide uses warnings and cautions to denote hazards.

WARNING A warning calls attention to a procedure, practice or the

like, which, if not correctly performed or adhered to, could

result in injury or the loss of life. Do not proceed beyond a

warning until the indicated conditions are fully

understood and met.

Caution A caution calls attention to a procedure, practice or the like which,

if not correctly performed or adhered to, could result in damage to

or the destruction of part or all of the equipment. Do not proceed

beyond a caution until the indicated conditions are fully

understood and met.

Personal Safety Considerations

WARNING This is a Safety Class I product (provided with a protective

earthing ground incorporated in the power cord). The

mains plug shall only be inserted in a socket outlet

provided with a protective earth contact. Any interruption

of the protective conductor, inside or outside the

instrument, is likely to make the instrument dangerous.

Intentional interruption is prohibited.

If this instrument is not used as specified, the protection

provided by the equipment could be impaired. This

instrument must be used in a normal condition (in which

all means of protection are intact) only.

No operator serviceable parts inside. Refer servicing to

qualified personnel. To prevent electrical shock, do not

remove covers.

For continued protection against fire hazard, replace the

line fuse(s) only with fuses of the same type and rating (for

example, normal blow, time delay, etc.). The use of other

fuses or material is prohibited.

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

General Safety Considerations

iv EPM-P Series Power Meters Programming Guide

General Safety Considerations

WARNING Before this instrument is switched on, make sure it has

been properly grounded through the protective conductor

of the ac power cable to a socket outlet provided with

protective earth contact.

Any interruption of the protective (grounding) conductor,

inside or outside the instrument, or disconnection of the

protective earth terminal can result in personal injury.

Caution Any adjustments or service procedures that require operation of

the instrument with protective covers removed should be

performed only by trained service personnel.

User Environment

The product is suitable for indoor use only.

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

About this Guide

EPM-P Series Power Meters Programming Guide v

About this Guide

Chapter 1: Power Meter Remote Operation

This chapter describes the parameters which configure the power meter

and helps you determine settings to optimize performance.

Chapter 2: MEASurement Instructions

This chapter explains how to use the MEASure group of instructions to

acquire data using a set of high level instructions.

Chapter 3: CALCulate Subsystem

This chapter explains how to use the CALCulate subsystem to perform

post acquisition data processing.

Chapter 4: CALibration Subsystem

This chapter explains how to use the CALibration command subsystem

to zero and calibrate the power meter.

Chapter 5: DISPlay Subsystem

This chapter explains how the DISPlay subsystem is used to control the

the selection and presentation of the windows used on the power meter’s

display.

Chapter 6: FORMat Subsystem

This chapter explains how the FORMat subsystem is used to set a data

format for transferring numeric information.

Chapter 7: MEMory Subsystem

This chapter explains how the MEMory command subsystem is used to

create, edit and review sensor calibration tables.

Chapter 8: OUTput Subsystem

This chapter explains how the OUTput command subsystem is used to

switch the POWER REF output on and off.

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

About this Guide

vi EPM-P Series Power Meters Programming Guide

Chapter 9: SENSe Subsystem

This chapter explains how the SENSe command subsystem directly affects

device specific settings used to make measurements.

Chapter 10: STATus Subsystem

This chapter explains how the STATus command subsystem enables you

to examine the status of the power meter by monitoring the “Device

Status Register”, “Operation Status Register” and the “Questionable

Status Register”.

Chapter 11: SYSTem Subsystem

This chapter explains how to use the SYSTem command subsystem to

return error numbers and messages from the power meter, preset the

power meter, set the GPIB address, set the command language and query

the SCPI version.

Chapter 12: TRACe Subsystem

This chapter explains how to use the TRACe command subsystem to

configure and read back the measured power trace.

Chapter 13: TRIGger Subsystem

This chapter explains how the TRIGger command subsystem is used

synchronize device actions with events.

Chapter 14: UNIT Subsystem

This chapter explains how to use the UNIT command subsystem to set the

power meter measurement units to Watts and % (linear), or dBm and dB

(logarithmic).

Chapter 15: SERVice Subsystem

This chapter explains how to use the SERVice command subsystem to

obtain and set information useful for servicing the power meter.

Chapter 16: IEEE488.2 Command Reference

This chapter contains information about the IEEE488.2 Common

Commands that the power meter supports.

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

About this Guide

EPM-P Series Power Meters Programming Guide vii

Appendix A

This appendix contains information about the calibration factor block

layout.

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Related Publications

viii EPM-P Series Power Meters Programming Guide

Related Publications

The EPM-P Series Power Meters User’s Guide is available on the CD-ROM

and in the following languages:

•English Language User’s Guide - Standard

•German Language User’s Guide - Option ABD

•Spanish Language User’s Guide - Option ABE

•French Language User’s Guide - Option ABF

•Italian Language User’s Guide - Option ABZ

•Japanese Language User’s Guide - Option ABJ

Useful information on SCPI (Standard Commands for Programmable

Instruments) can be found in:

•A Beginner’s Guide to SCPI, which is available by ordering

Agilent Part Number 5010-7166.

•The SCPI reference manuals which are available from:

SCPI Consortium,

8380 Hercules Drive, Suite P3,

La Mesa, CA 91942, USA.

Telephone: 619-697-4301

Fax: 619-697-5955

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Table of Contents

Page

EPM-P Series Power Meters Programming Guide Contents-1

Equipment Operation..................................................................iii

Personal Safety Considerations............................................iii

General Safety Considerations.................................................... iv

User Environment................................................................. iv

About this Guide........................................................................... v

Related Publications..................................................................viii

Power Meter Remote Operation...................................................... 1-1

Introduction................................................................................... 1-2

Configuring the Remote Interface................................................ 1-3

Interface election.................................................................... 1-3

GPIB Address......................................................................... 1-3

RS232/RS422 Configuration.................................................. 1-4

Zeroing and Calibrating the Power Meter .................................. 1-5

Zeroing .................................................................................... 1-5

Calibration.............................................................................. 1-5

Setting the Reference Calibration Factor ............................ 1-7

Making Measurements ................................................................ 1-8

Using MEASure? ................................................................... 1-9

Using the CONFigure Command ......................................... 1-14

Using the Lower Level Commands........................................ 1-23

Making Measurements on Wireless Communication Standards 1-24

Measuring GSM...................................................................... 1-24

Measuring EDGE .................................................................. 1-26

Measuring NADC .................................................................. 1-28

Measuring iDEN .................................................................... 1-31

Measuring Bluetooth.............................................................. 1-33

Measuring cdmaOne .............................................................. 1-35

Measuring W-CDMA.............................................................. 1-37

Measuring cdma2000 ............................................................ 1-39

Using Sensor Calibration Tables ................................................ 1-41

Overview................................................................................. 1-41

Editing Sensor Calibration Tables ....................................... 1-44

Selecting a Sensor Calibration Table ................................... 1-49

Enabling the Sensor Calibration Table System ................... 1-49

Making the Measurement...................................................... 1-50

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Andere Handbücher für EPM-P Series

Inhaltsverzeichnis

Andere Agilent Technologies Messgerät Handbücher

Agilent Technologies

Agilent Technologies Agilent 4396B Betriebsanleitung

Agilent Technologies

Agilent Technologies N2893A Bedienungsanleitung

Agilent Technologies

Agilent Technologies InfinityLab LC Series Bedienungsanleitung

Agilent Technologies

Agilent Technologies 8590L Bedienungsanleitung

Agilent Technologies

Agilent Technologies 5500t Bedienungsanleitung

Agilent Technologies

Agilent Technologies WireScope 350 Bedienungsanleitung

Agilent Technologies

Agilent Technologies E4440A Kurzanleitung

Agilent Technologies

Agilent Technologies u8903a Bedienungsanleitung

Agilent Technologies

Agilent Technologies N5230A Bedienungsanleitung

Agilent Technologies

Agilent Technologies Agilent 4396B Bedienungsanleitung

Agilent Technologies

Agilent Technologies L4532A Series Bedienungsanleitung

Agilent Technologies

Agilent Technologies U1211A Bedienungsanleitung

Agilent Technologies

Agilent Technologies 1290 Infinity II Bedienungsanleitung

Agilent Technologies

Agilent Technologies 35670A Bedienungsanleitung

Agilent Technologies

Agilent Technologies EPM-P Series Bedienungsanleitung

Agilent Technologies

Agilent Technologies 16700 SERIES LOGIC ANALYSIS SYSTEM 16700 Bedienungs- und Sicherheitshinweise

Agilent Technologies

Agilent Technologies 16441A R-Box Bedienungsanleitung

Agilent Technologies

Agilent Technologies 16850 Series Bedienungsanleitung

Agilent Technologies

Agilent Technologies E5270 Series Bedienungsanleitung

Agilent Technologies

Agilent Technologies 4284A Bedienungsanleitung

Agilent Technologies

Agilent Technologies 1146B Bedienungsanleitung

Agilent Technologies

Agilent Technologies E4445A PSA Series Kurzanleitung

Agilent Technologies

Agilent Technologies 85225F Bedienungsanleitung

Agilent Technologies

Agilent Technologies E4440A Kurzanleitung

Beliebte Messgerät Handbücher anderer Marken

Suaoki

Suaoki D40 Bedienungsanleitung

Elster

Elster BK-G1.6 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Deltabar FMD71 Handbuch

Duratool

Duratool D03128 Bedienungsanleitung

Vega

Vega VEGAPULS 65 Bedienungsanleitung

Tonghui

Tonghui TH2618B Bedienungsanleitung

Tenmars

Tenmars TM-801 Bedienungsanleitung

MSR

MSR 145 Bedienungsanleitung

TPS

TPS WP-82 Bedienungsanleitung

ELMETRON

ELMETRON CP-511 Bedienungsanleitung

PCB Piezotronics

PCB Piezotronics 003C30 Bedienungsanleitung

Tenma

Tenma 72-10465 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Proline Promag 50 Technische Daten

Siemens

Siemens SITRANS F Coriolis FCT030 Stücklistenhandbuch

KLINGER

KLINGER CMF V Series Bedienungsanleitung

EXFO

EXFO FTB-2 Bedienungs- und Wartungshandbuch

Keysight

Keysight M8290A Bedienungsanleitung

ADTEK

ADTEK MW-5 Bedienungsanleitung