Agilent Technologies FieldFox N9912A Kurzanleitung

IIF

IIC

IIO

ADMINISTRATIVE INFORMATION

SERVICE NOTE CLASSIFICATION:

MODIFICATION RECOMMENDED

ACTION X ON SPECIFIED FAILURE

CATEGORY: [[]] AGREEABLE TIME

STANDARDS

LABOR: 7.0 Hours

LOCATION [[]] CUSTOMER INSTALLABLE

CATEGORY: [[]] ON-SITE

X SERVICE CENTER

[[]] CHANNEL PARTNER

SERVICE [[]] RETURN

INVENTORY:X SCRAP

[[]] SEE TEXT

USED [[]] RETURN

PARTS: X SCRAP

[[]] SEE TEXT

AVAILABILITY: PRODUCT’S SUPPORT LIFE

NO CHARGE AVAILABLE UNTIL: 31-DEC-2020

X Calibration Required

[[]] Calibration NOT Required

PRODUCT LINE: WN

AUTHOR: LSH

ADDITIONAL INFORMATION:

PRINTED IN U.S.A.

August 9, 2012

Rev. 20 Page 1 of 3

N9912A-03A

S E R V I C E N O T E

Supersedes:

N9912A-03

N9912A FieldFox RF Analyzer

Serial Numbers: US00000000-US49230000, SG00000000-SG49230000, MY00000000-MY49230000

Replace or modify the System Board (N9912-60004) to prevent power up problem.

Parts Required:

P/N Description Qty.

N9912-60004 System Board 1

N9912-60002 RF assy 1

Page 2 of 3 N9912A-03A

Situation:

A FieldFox may not power up under the following circumstances:

- The FieldFox has been operated until the battery has become completely discharged and the unit

turns off.

- The user connects external power but the unit will not turn on.

- Installing a charged battery in the unit does not fix the problem, the unit will not power up.

Work around:

- Remove the battery and external power from the unit.

- Connect external power to the unit.

- Turn the unit on.

- Insert the battery after the unit has successfully powered on.

Solution/Action:

If the power up problem described above occurs and if the customer insists the problem be permanently fixed

then replace the System Board (N9912-60004). Alternatives to replacing the System Board are to use the

work around given above or to modify the existing System Board.

Process to replace the System Board:

For some units, it will be necessary to replace both the System Board (N9912-60004) and the RF

Assy (N912-60002). See Service Note N9912A-02 for an explanation. Do the following to check the

revision of the RF Assy:

- If the firmware revision is less than A.03.02, upgrade the firmware.

- Power up the FieldFox and press the System hard key.

- Press Service Diagnostics then System Information

- On the “SB Identity” line, the value following “HW=” should be 6 or greater.

- On the “RF Identity” line, note the value following “HW=”.

For “RF Identity”, if the value following “HW=” is 9 or less (or if “N/A” is displayed), the RF Assy

must be replaced along with the System Board.

Assembly replacement instructions are contained in the N9912A Service Guide (N9912-90003).

After assembly replacement is complete, do the following to check for compatible assembly

revisions:

- If the firmware revision is less than A.03.02, upgrade the firmware.

- Power up the FieldFox and press the System hard key.

- Press Service Diagnostics then System Information

- On the “SB Identity” line, the value following “HW=” should be 6 or greater.

After replacing the System Board, perform the Operation Check in chapter 3 of the FieldFox Service

Guide (N9912-90003).

Process to modify existing System Board:

It is possible to modify the existing System Board if your facility has limited surface mount soldering

capability. The modification involves removing a surface mount capacitor. Contact CTD email at ctd-

soco_support@agilent.com to obtain detailed information. If your facility is qualified, this solution

is faster and less expensive.

Page 3 of 3 N9912A-03A

After modifying the System Board, perform the Operation Check in chapter 3 of the FieldFox Service

Guide (N9912-90003).

Andere Handbücher für FieldFox N9912A

Andere Agilent Technologies Messgerät Handbücher

Agilent Technologies

Agilent Technologies E4416A Bedienungsanleitung

Agilent Technologies

Agilent Technologies 4500 Series Bedienungsanleitung

Agilent Technologies

Agilent Technologies M9210A Benutzerhandbuch

Agilent Technologies

Agilent Technologies E8363A Installations- und Betriebshandbuch

Agilent Technologies

Agilent Technologies 4395A Bedienungsanleitung

Agilent Technologies

Agilent Technologies 4294A Betriebsanleitung

Agilent Technologies

Agilent Technologies 4284A Bedienungsanleitung

Agilent Technologies

Agilent Technologies 4288A Betriebsanleitung

Agilent Technologies

Agilent Technologies HP 5890 II Series Bedienungsanleitung

Agilent Technologies

Agilent Technologies E444 AU Series Bedienungsanleitung

Agilent Technologies

Agilent Technologies WireScope 350 Bedienungsanleitung

Agilent Technologies

Agilent Technologies 16718A Referenzhandbuch

Agilent Technologies

Agilent Technologies 5185-5991 Bedienungsanleitung

Agilent Technologies

Agilent Technologies 34136A Bedienungsanleitung

Agilent Technologies

Agilent Technologies ESA E4401B Installations- und Betriebshandbuch

Agilent Technologies

Agilent Technologies B1500A Installationsanleitung

Agilent Technologies

Agilent Technologies 2100 Bioanalyzer System Installations- und Betriebsanleitung

Agilent Technologies

Agilent Technologies E5100A Bedienungsanleitung

Agilent Technologies

Agilent Technologies E8362C Bedienungsanleitung

Agilent Technologies

Agilent Technologies 86082A Bedienungsanleitung

Agilent Technologies

Agilent Technologies OmniBER 725 Bedienungsanleitung

Agilent Technologies

Agilent Technologies 2100 Bioanalyzer System Bedienungsanleitung

Agilent Technologies

Agilent Technologies 8719ET Handbuch

Agilent Technologies

Agilent Technologies PSA Series Bedienungsanleitung

Beliebte Messgerät Handbücher anderer Marken

Suaoki

Suaoki D40 Bedienungsanleitung

Elster

Elster BK-G1.6 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Deltabar FMD71 Handbuch

Duratool

Duratool D03128 Bedienungsanleitung

Vega

Vega VEGAPULS 65 Bedienungsanleitung

Tonghui

Tonghui TH2618B Bedienungsanleitung

Tenmars

Tenmars TM-801 Bedienungsanleitung

MSR

MSR 145 Bedienungsanleitung

TPS

TPS WP-82 Bedienungsanleitung

ELMETRON

ELMETRON CP-511 Bedienungsanleitung

PCB Piezotronics

PCB Piezotronics 003C30 Bedienungsanleitung

Tenma

Tenma 72-10465 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Proline Promag 50 Technische Daten

Siemens

Siemens SITRANS F Coriolis FCT030 Stücklistenhandbuch

KLINGER

KLINGER CMF V Series Bedienungsanleitung

EXFO

EXFO FTB-2 Bedienungs- und Wartungshandbuch

Keysight

Keysight M8290A Bedienungsanleitung

ADTEK

ADTEK MW-5 Bedienungsanleitung