Agilent Technologies E1364A Bedienungsanleitung

Agilent 75000 SERIES B

Agilent E1364A 16-Channel

Form C Switch Module

User’s Manual

*E1364-90002*

E1364-90002

E0406

Manual Part Number: E1364-90002

Microfiche Part Number: E1364-99002 Printed: April 2006 Edition 2 Rev 2

Printed in Malaysia E0406

Contents

Agilent E1364A Switch Module Table of Contents

Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

WARNINGS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Safety Symbols . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Declaration of Conformity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

1. Agilent E1364A Getting Started . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Using This Chapter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Instrument Definition . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Switch Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Basic Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Typical Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Programming the Switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Specifying SCPI Commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Switch Card Numbers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Switch Channel Numbers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Initial Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

2. Configuring the Agilent E1364A Form C Switch . . . . . . . . . . . . . . . . . . . . . . . . 17

Using This Chapter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Warnings and Cautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Connecting User Inputs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

Typical Switch Configurations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

General Purpose Relay Configuration . . . . . . . . . . . . . . . . . . . . . . . . 20

Relay Control Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Digital Output Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

Changing Form C Switch Components . . . . . . . . . . . . . . . . . . . . . . . . . . 23

Module Front Panel Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

3. Using the Agilent E1364A Form C Switch . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

Using This Chapter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

Form C Switch Commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

Switching Channels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

Switching Channels Comments . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

Scanning Channels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

Scanning Channels Comments . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32

4. Understanding the Agilent E1364A Form C Switch . . . . . . . . . . . . . . . . . . . . . . 33

Using This Chapter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33

Scanning Channels Commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33

Using Scanning Trigger Sources . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33

Scanning With External Instruments . . . . . . . . . . . . . . . . . . . . . . . . . . . 33

Using the Scan Complete Bit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38

Special 488.2 Commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39

AgilentE1364ASwitch Module Table ofContents1

Storing States . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39

Recalling States . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39

SCPI Error Responses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40

5. Agilent E1364A Form C Switch Command Reference . . . . . . . . . . . . . . . . . . . . . 41

Using This Chapter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41

Command Types . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41

Common Command Format . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41

SCPI Command Format . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41

Command Separator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42

Abbreviated Commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42

Implied Commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42

Parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43

Linking Commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43

SCPI Command Reference . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44

ABORt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44

ARM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45

:COUNt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45

:COUNt? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46

DISPlay . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47

MONitor:CARD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47

MONitor[:STATe] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48

INITiate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49

:CONTinuous . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49

:CONTinuous? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50

[:IMMediate] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50

OUTPut . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51

[:STATe] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51

[:STATe]? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51

[ROUTe:] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52

CLOSe . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52

CLOSe? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53

OPEN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53

OPEN? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54

SCAN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54

SCAN:MODE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55

STATus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55

:OPERation[:EVENt]? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55

:OPERation:ENABle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56

SYSTem . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56

:ERRor? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56

:CDEScription? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57

:CTYPe? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57

:CPON . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58

TRlGger . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58

[:IMMediate] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58

:SOURce . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59

:SOURce? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60

2 Agilent E1364ASwitchModuleTable of Contents

IEEE 488.2 Common Commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61

Command Quick Reference . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62

A. Agilent E1364A Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63

Relay Life . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64

End of Life Detection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64

Replacement Strategy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64

B. Agilent E1364A Form C Switch Registers . . . . . . . . . . . . . . . . . . . . . . . . . . . 65

Addressing the Registers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66

Reading the Registers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66

ID/Device Type Registers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66

Status/Control Register . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66

Channel Enable Register . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67

Writing to the Registers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67

Channel Enable Register . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67

C. Agilent E1364A Form C Switch Error Messages . . . . . . . . . . . . . . . . . . . . . . . 69

AgilentE1364ASwitch Module Table ofContents3

Notes

4 Agilent E1364ASwitchModuleTable of Contents

Certification

Agilent Technologies certifies that this product met its published specifications at the time of shipment from the factory. Agilent

Technologies further certifies that its calibration measurements are traceable to the United States National Institute of Standards and

Technology(formerlyNationalBureauof Standards),totheextentallowedbythatorganization’scalibrationfacility,andtothe calibration

facilities of other International Standards Organization members.

Warranty

ThisAgilent Technologiesproductiswarranted againstdefectsinmaterialsand workmanshipfor a period of one yearfrom date of

shipment. Duration and conditions of warranty for this product may be superseded when the product is integrated into (becomes a part

of) other Agilent products. During the warranty period, Agilent Technologies will, at its option, either repair or replace products which

prove to be defective.

For warranty service or repair, this product must be returned to a service facility designated by Agilent Technologies. Buyer shall prepay

shipping charges to Agilent and Agilentshall pay shipping charges to return the product to Buyer. However, Buyer shall pay all shipping

charges, duties, and taxes for products returned to Agilent from another country.

Agilent warrants that its software and firmware designated by Agilent for use with a product will execute its programming instructions

when properly installed on that product. Agilent does not warrant that the operation of the product, or software, or firmware will be

uninterrupted or error free.

Limitation Of Warranty

The foregoing warranty shall not apply to defects resulting from improper or inadequate maintenance by Buyer, Buyer-supplied products

or interfacing, unauthorized modification or misuse, operation outside of the environmental specifications for the product, or improper site

preparation or maintenance.

The design and implementation of any circuit on this product is the sole responsibility of the Buyer. Agilent does not warrant the Buyer’s

circuitry or malfunctions of Agilent products that result from the Buyer’s circuitry. In addition, Agilent does not warrant any damage that

occurs as a result of the Buyer’s circuit or any defects that result from Buyer-supplied products.

NO OTHER WARRANTY IS EXPRESSED OR IMPLIED. Agilent SPECIFICALLY DISCLAIMS THE IMPLIED WARRANTIES

OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.

Exclusive Remedies

THE REMEDIES PROVIDED HEREIN ARE BUYER’S SOLE AND EXCLUSIVE REMEDIES. Agilent SHALL NOT BE LIABLE

FOR ANY DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES, WHETHER BASED ON CON-

TRACT, TORT, OR ANY OTHER LEGAL THEORY.

Notice

The information contained in this document is subject to change without notice. Agilent Technologies MAKES NO WARRANTY OF

ANY KIND WITH REGARD TO THIS MATERIAL, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF

MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. Agilent shall not be liable for errors contained herein or for

incidental or consequential damages in connection with the furnishing, performance or use of this material. This document contains

proprietary information whichis protected by copyright. All rights arereserved. No partof thisdocumentmaybephotocopied,reproduced,

or translated to another language without the prior written consent of Agilent Technologies, Inc. Agilent assumes no responsibility for the

use or reliability of its software on equipment that is not furnished by Agilent.

U.S. Government Restricted Rights

The Software and Documentation have been developed entirely at private expense. They are delivered and licensed as "commercial

computer software" as defined in DFARS 252.227- 7013 (Oct 1988), DFARS 252.211-7015 (May 1991) or DFARS 252.227-7014 (Jun

1995),as a"commercialitem" asdefined in FAR 2.101(a),or as "Restrictedcomputer software" asdefined inFAR52.227-19(Jun 1987)(or

any equivalent agency regulation or contractclause), whichever is applicable. You have only those rights provided for such Software and

Documentation by the applicable FAR or DFARS clause or the Agilent standard software agreement for the product involved.

Agilent E1364A 16-Channel Form C Switch User’s Manual

Edition 2 Rev 2

Agilent E1364A 16-Channel Form C Switch User’s Manual 5

Frame or chassis ground terminal—typically

connects to the equipment’s metal frame.

Alternating current (AC).

Direct current (DC).

Indicates hazardous voltages.

Calls attention to a procedure, practice, or con-

dition that could cause bodily injury or death.

Calls attention to a procedure, practice, or con-

dition that could possibly cause damage to

equipment or permanent loss of data.

Indicates the field wiring terminal that must

beconnectedtoearthgroundbeforeoperating

the equipment—protects against electrical

shock in case of fault.

Instructionmanualsymbolaffixedtoproduct.

Indicates that the user must refer to the man-

ual for specific WARNING or CAUTION

information to avoid personal injury or dam-

age to the product.

WARNINGS

The following general safety precautions must be observed during all phases of operation, service, and repair of this product.

Failure to comply with these precautions or with specific warnings elsewhere in this manual violates safety standards of design,

manufacture, and intended use of the product. Agilent Technologies assumes no liability for the customer’s failure to comply with

these requirements.

Ground the equipment: For Safety Class 1 equipment (equipment having a protective earth terminal), an uninterruptible safety earth

ground must be provided from the mains power source to the product input wiring terminals or supplied power cable.

DO NOT operate the product in an explosive atmosphere or in the presence of flammable gases or fumes.

For continued protection against fire, replace the line fuse(s) only with fuse(s) of the same voltage and current rating and type.

DO NOT use repaired fuses or short-circuited fuse holders.

Keep away from live circuits: Operating personnel must not remove equipment covers or shields. Procedures involving the removal of

covers or shields are for use by service-trained personnel only. Under certain conditions, dangerous voltages may exist even with the

equipment switched off. To avoid dangerous electrical shock, DO NOT perform procedures involving cover or shield removal unless you

are qualified to do so.

DO NOT operate damaged equipment: Whenever it is possible that the safety protection features built into this product have been

impaired, either through physical damage, excessive moisture, or any other reason, REMOVE POWER and do not use the product until

safe operation can be verified by service-trained personnel. If necessary, return the product to an Agilent Technologies Sales and Service

Office for service and repair to ensure that safety features are maintained.

DO NOT service or adjust alone: Do not attempt internal service or adjustmentunless another person, capable of rendering first aid and

resuscitation, is present.

DO NOTsubstitute parts or modify equipment: Because of the danger of introducing additional hazards, do not install substitute parts

or perform any unauthorized modification to the product. Return the product to an Agilent Technologies Sales and Service Office for

service and repair to ensure that safety features are maintained.

Printing History

The Printing History shown below lists all Editions and Updates of this manual and the printing date(s). The first printing of the manual

is Edition 1. The Edition number increments by 1 whenever the manual is revised. Updates, which are issued between Editions, contain

replacement pages to correct the current Edition of the manual. Updates are numbered sequentially starting with Update 1. When a new

Edition is created, it contains all the Update information for the previous Edition. Each new Edition or Update also includes a revised copy

of this printing history page. Many product updates or revisions do not require manual changes and, conversely, manual corrections may

be done without accompanying product changes. Therefore, do not expect a one-to-one correspondence between product updates and

manual updates.

Edition 1 (Part Number E1364-90001). . . . . . . . . . . . . . . . . . . . September 1989

Edition 2 (Part Number E1364-90002). . . . . . . . . . . . . . . . . . . . . . . . April 1995

Edition 2 Rev 2 (Part Number E1364-90002) . . . . . . . . . . . . . . . . . . April 2006

Safety Symbols

WARNING

CAUTION

6 Agilent E1364A 16-Channel Form C Switch User’s Manual

DECLARATION OF CONFORMITY

According to ISO/IEC Guide 22 and CEN/CENELEC EN 45014

Agilent E1364A 16-Channel Form C Switch User’s Manual 7

Manufacturer’s Name: Agilent Technologies, Incorporated

Manufacturer’s Address: 815 – 14th St. SW

Loveland, Colorado 80537

USA

Declares, that the product

Product Name: VXI B-Size 16 Channel Form C Switch

Model Number: E1364A

Product Options: This declaration covers all options of the above product(s).

Conforms with the following European Directives:

The product herewith complies with the requirements of the Low Voltage Directive 73/23/EEC and the EMC Directive 89/336/EEC

(including 93/68/EEC) and carries the CE Marking accordingly.

Conforms with the following product standards:

EMC Standard

CISPR 11:1990 / EN 55011:1991

IEC 801-2:1991 / EN 50082-1:1992

IEC 801-3:1984 / EN 50082-1:1992

IEC 801-4:1988 / EN 50082-1:1992

Limit

Group 1 Class A

4kV CD, 8kV AD

3 V/m

0.5kV signal lines, 1kV power lines

The product was tested in a typical configuration with Agilent Technologies or Hewlett-Packard Company test

systems.

Safety IEC 1010-1:1990+A1:1992 / EN 61010-1:1993

Canada: CSA C22.2 No. 1010.1:1992

UL 1244

5 June 2001

Date Ray Corson

Product Regulations Program Manager

For further information, please contact your local Agilent Technologies sales office, agent or distributor.

Authorized EU-representative: Agilent Technologies Deutschland GmbH, Herrenberger Straβe 130, D 71034 Böblingen, Germany

Notes

8 Agilent E1364A 16-Channel Form C Switch User’s Manual

Inhaltsverzeichnis

Andere Agilent Technologies Schalten Handbücher

Agilent Technologies

Agilent Technologies 86062C Bedienungsanleitung

Agilent Technologies

Agilent Technologies 34972A Bedienungsanleitung

Agilent Technologies

Agilent Technologies Switch/Measure Bedienungsanleitung

Agilent Technologies

Agilent Technologies Agilent E6474A Bedienungsanleitung

Agilent Technologies

Agilent Technologies 34970A Bedienungsanleitung

Agilent Technologies

Agilent Technologies 3488A Kurzanleitung

Agilent Technologies

Agilent Technologies Agilent 3499A Bedienungsanleitung

Agilent Technologies

Agilent Technologies 86060C Series Bedienungsanleitung

Agilent Technologies

Agilent Technologies 34950A Bedienungsanleitung

Agilent Technologies

Agilent Technologies Agilent 34980A Bedienungsanleitung

Agilent Technologies

Agilent Technologies U2121A-101 RF Bedienungsanleitung

Agilent Technologies

Agilent Technologies 75000 Series C Bedienungsanleitung

Agilent Technologies

Agilent Technologies 34937A Bedienungsanleitung

Agilent Technologies

Agilent Technologies Agilent E5252A Bedienungsanleitung

Agilent Technologies

Agilent Technologies L4445A Bedienungsanleitung

Agilent Technologies

Agilent Technologies 34945A Bedienungsanleitung

Agilent Technologies

Agilent Technologies 81591B Bedienungsanleitung

Agilent Technologies

Agilent Technologies 8710 Series Service-Handbuch

Agilent Technologies

Agilent Technologies 86060C Series Bedienungs- und Sicherheitshinweise

Agilent Technologies

Agilent Technologies Agilent 34980A Bedienungsanleitung

Agilent Technologies

Agilent Technologies Agilent 34980A Bedienungsanleitung

Agilent Technologies

Agilent Technologies U2751A Handbuch

Agilent Technologies

Agilent Technologies 34901A Bedienungsanleitung

Agilent Technologies

Agilent Technologies B2200A Bedienungsanleitung

Beliebte Schalten Handbücher anderer Marken

URC

URC Total Control MFS-8 Bedienungsanleitung

Azbil

Azbil HPQ-D11 Bedienungsanleitung

Sony

Sony DFS-900M Bedienungsanleitung

SICK

SICK i17S Bedienungsanleitung

F&F

F&F SZR-277 Bedienungsanleitung

Shure

Shure UAMS/BK Bedienungsanleitung

Dräger

Dräger X-zone Switch Off Bedienungsanleitung

Asco

Asco Joucomatic 349 Series Bedienungsanleitung

BT Mini Hub Bedienungsanleitung

D-Link

D-Link DES-1226G Bedienungsanleitung

Johnson Controls

Johnson Controls FS80-C Bedienungsanleitung

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Bedienungsanleitung

MicroNet

MicroNet SP1200A Bedienungsanleitung

Ruijie

Ruijie RG-PF2920 Series Installations- und Betriebsanleitung

Altinex

Altinex DA1914SX Bedienungsanleitung

MiLAN

MiLAN MIL-SM2401M Bedienungsanleitung

RJM

RJM MASTERMIND PBC/6X Bedienungsanleitung

Atlas

Atlas MMK-KVM8 Bedienungsanleitung