Agilent Technologies U2751A Handbuch

Agilent Technologies

Agilent U2751A USB

Modular Switch Matrix

User’s and Service Guide

II U2751A User’s and Service Guide

Notices

® Agilent Technologies, Inc., 2008–2013

No part of this manual may be reproduced in

any form or by any means (including elec-

tronic storage and retrieval or translation

into a foreign language) without prior agree-

ment and written consent from Agilent

Technologies, Inc. as governed by United

States and international copyright laws.

Manual Part Number

U2751-90011

Edition

Fifth Edition, August 2, 2013

Agilent Technologies, Inc.

5301 Stevens Creek Blvd.

Santa Clara, CA 95051 USA

Warranty

The material contained in this docu-

ment is provided “as is,” and is sub-

ject to being changed, without notice,

in future editions. Further, to the max-

imum extent permitted by applicable

law, Agilent disclaims all warranties,

either express or implied, with regard

to this manual and any information

contained herein, including but not

limited to the implied warranties of

merchantability and fitness for a par-

ticular purpose. Agilent shall not be

liable for errors or for incidental or

consequential damages in connec-

tion with the furnishing, use, or per-

formance of this document or of any

information contained herein. Should

Agilent and the user have a separate

written agreement with warranty

terms covering the material in this

document that conflict with these

terms, the warranty terms in the sep-

arate agreement shall control.

Technology Licenses

The hardware and/or software described in

this document are furnished under a license

and may be used or copied only in accor-

dance with the terms of such license.

Restricted Rights Legend

U.S. Government Restricted Rights. Soft-

ware and technical data rights granted to

the federal government include only those

rights customarily provided to end user cus-

tomers. Agilent provides this customary

commercial license in Software and techni-

cal data pursuant to FAR 12.211 (Technical

Data) and 12.212 (Computer Software) and,

for the Department of Defense, DFARS

252.227-7015 (Technical Data - Commercial

Items) and DFARS 227.7202-3 (Rights in

Commercial Computer Software or Com-

puter Software Documentation).

Safety Notices

CAUTION

A CAUTION notice denotes a haz-

ard. It calls attention to an operat-

ing procedure, practice, or the like

that, if not correctly performed or

adhered to, could result in damage

to the product or loss of important

data. Do not proceed beyond a

CAUTION notice until the indicated

conditions are fully understood and

met.

WARNING

A WARNING notice denotes a

hazard. It calls attention to an

operating procedure, practice, or

the like that, if not correctly per-

formed or adhered to, could result

in personal injury or death. Do not

proceed beyond a WARNING

notice until the indicated condi-

tions are fully understood and

met.

Trademark Acknowledgements

Pentium is a U.S. registered trademark of

Intel Corporation.

Microsoft, Visual Studio, Windows, and MS

Windows are trademarks of Microsoft Cor-

poration in the United States and/or other

countries.

U2751A User’s and Service Guide III

Safety Symbols

The following symbols on the instrument and in the documentation

indicate precautions which must be taken to maintain safe operation of

the instrument.

Direct current (DC) Off (supply)

Alternating current (AC) On (supply)

Both direct and alternating current Caution, risk of electric shock

Three-phase alternating current Caution, risk of danger (refer to this

manual for specific Warning or Caution

information)

Earth (ground) terminal Caution, hot surface

Protective conductor terminal Out position of a bi-stable push control

Frame or chassis terminal In position of a bi-stable push control

Equipotentiality CAT I Measurements performed on circuits

not directly connected to MAINS

Equipment protected throughout by

double insulation or reinforced

insulation

IV U2751A User’s and Service Guide

General Safety Information

WARNING

• Do not operate the device around explosive gas, vapor, or dust.

• Observe all markings on the device before establishing any

connection.

• The device is under CAT I measurement category, do not connect the

25-pin connector to MAINS.

• Do not measure higher than the rated voltage (as marked on the

device).

• Do not operate the device with the cover removed or loosened.

• Use only the power adapter provided by the manufacturer to avoid

any unexpected hazards.

CAUTION

•Electrostatic discharge (ESD) can cause damage to the components in

the instrument and accessories. The cables or wires should be

connected to the plug-in connectors first and covered with the wire

casing prior to plugging it into the output connector to prevent ESD

from occurring.

•If the device is used in a manner not specified by the manufacturer, the

device protection may be impaired.

•Always use dry cloth to clean the device. Do not use ethyl alcohol or

any other volatile liquid to clean the device.

•Do not permit any blockage of the ventilation holes of the device.

CAT I:

Maximum working voltage:

Standalone 35 Vrms

Modular (Used with U2781A) 180 Vrms

Maximum transient voltage: 300 Vrms

U2751A User’s and Service Guide V

Environmental Conditions

This instrument is designed for indoor use and in an area with low

condensation. The table below shows the general environmental

requirements for this instrument.

Environmental conditions Requirements

Operating temperature 0 °C to 50 °C

Operating humidity 20% to 85% RH non-condensing

Storage temperature –20 °C to 70 °C

Storage humidity 5% to 90% RH non-condensing

CAUTION

The U2751A USB modular switch matrix complies with the following

safety and EMC requirements.

•IEC 61010-1:2001/EN61010-1:2001 (2nd Edition)

•Canada: CAN/CSA-C22.2 No. 61010-1-04

•USA: ANSI/UL 61010-1:2004

•IEC 61326-2002/EN 61326:1997+A1:1998+A2:2001+A3:2003

•Canada: ICES-001:2004

•Australia/New Zealand: AS/NZS CISPR11:2004

VI U2751A User’s and Service Guide

Regulatory Markings

The CE mark is a registered trademark

of the European Community. This CE

mark shows that the product complies

with all the relevant European Legal

Directives.

The C-tick mark is a registered

trademark of the Spectrum

Management Agency of Australia.

This signifies compliance with

the Australia EMC Framework

regulations under the terms of the

Radio Communication Act of 1992.

ICES/NMB-001 indicates that this

ISM device complies with the

Canadian ICES-001.

Cet appareil ISM est confomre a la

norme NMB-001 du Canada.

This instrument complies with the

WEEE Directive (2002/96/EC)

marking requirement. This affixed

product label indicates that you must

not discard this electrical/electronic

product in domestic household waste.

The CSA mark is a registered

trademark of the Canadian Standards

Association.

U2751A User’s and Service Guide VII

Waste Electrical and Electronic Equipment (WEEE) Directive

2002/96/EC

This instrument complies with the WEEE Directive (2002/96/EC) marking

requirement. This affixed product label indicates that you must not discard

this electrical/electronic product in domestic household waste.

Product Category:

With reference to the equipment types in the WEEE directive Annex 1, this

instrument is classified as a “Monitoring and Control Instrument” product.

The affixed product label is as shown below.

Do not dispose in domestic household waste

To return this unwanted instrument, contact your nearest Agilent

Technologies, or visit:

www.agilent.com/environment/product

for more information.

VIII U2751A User’s and Service Guide

In This Guide…

1GettingStarted

This chapter provides an overview of the U2751A USB modular switch

matrix, which includes the product outlook, product dimensions, and

product layout. This chapter also contains instructions on how to install

and configure the U2751A.

2 Operation and Features

This chapter describes the operation and features that are offered by the

U2751A, such as switch controls and relay usage monitoring.

3 Characteristics and Specifications

This chapter contains the characteristics and specifications of the

U2751A.

4ServiceInformation

This chapter provides the guidelines for returning the U2751A to Agilent

Technologies for servicing or for servicing it yourself. It also contains the

list of replaceable parts.

U2751A User’s and Service Guide IX

Declaration of Conformity (DoC)

The Declaration of Conformity (DoC) for this instrument is

available on the Web site. You can search the DoC by its

product model or description.

http://regulations.corporate.agilent.com/DoC/search.htm

NOTE

If you are unable to search for the respective DoC, please contact your

local Agilent representative.

X U2751A User’s and Service Guide

THIS PAGE HAS BEEN INTENTIONALLY LEFT BLANK.

Inhaltsverzeichnis

Andere Agilent Technologies Schalten Handbücher

Agilent Technologies

Agilent Technologies 81591B Bedienungsanleitung

Agilent Technologies

Agilent Technologies L4445A Bedienungsanleitung

Agilent Technologies

Agilent Technologies 11713A Service-Handbuch

Agilent Technologies

Agilent Technologies E1364A Bedienungsanleitung

Agilent Technologies

Agilent Technologies 86060C Series Bedienungs- und Sicherheitshinweise

Agilent Technologies

Agilent Technologies 34972A Bedienungsanleitung

Agilent Technologies

Agilent Technologies B2200A Bedienungsanleitung

Agilent Technologies

Agilent Technologies E1463A Betriebsanleitung

Agilent Technologies

Agilent Technologies Agilent 34980A Bedienungsanleitung

Agilent Technologies

Agilent Technologies U2121A-101 RF Bedienungsanleitung

Agilent Technologies

Agilent Technologies 8710 Series Service-Handbuch

Agilent Technologies

Agilent Technologies 3488A Kurzanleitung

Agilent Technologies

Agilent Technologies 34950A Bedienungsanleitung

Agilent Technologies

Agilent Technologies 34945A Bedienungsanleitung

Agilent Technologies

Agilent Technologies 86060A Bedienungsanleitung

Agilent Technologies

Agilent Technologies 34970A Bedienungsanleitung

Agilent Technologies

Agilent Technologies Agilent 3499A Bedienungsanleitung

Agilent Technologies

Agilent Technologies 75000 Series C Bedienungsanleitung

Agilent Technologies

Agilent Technologies 3488 Bedienungsanleitung

Agilent Technologies

Agilent Technologies Agilent E6474A Bedienungsanleitung

Agilent Technologies

Agilent Technologies 34937A Bedienungsanleitung

Agilent Technologies

Agilent Technologies 86062C Bedienungsanleitung

Agilent Technologies

Agilent Technologies Agilent 34980A Bedienungsanleitung

Agilent Technologies

Agilent Technologies 86060C Series Bedienungsanleitung

Beliebte Schalten Handbücher anderer Marken

URC

URC Total Control MFS-8 Bedienungsanleitung

Azbil

Azbil HPQ-D11 Bedienungsanleitung

Sony

Sony DFS-900M Bedienungsanleitung

SICK

SICK i17S Bedienungsanleitung

F&F

F&F SZR-277 Bedienungsanleitung

Shure

Shure UAMS/BK Bedienungsanleitung

Dräger

Dräger X-zone Switch Off Bedienungsanleitung

Asco

Asco Joucomatic 349 Series Bedienungsanleitung

BT Mini Hub Bedienungsanleitung

D-Link

D-Link DES-1226G Bedienungsanleitung

Johnson Controls

Johnson Controls FS80-C Bedienungsanleitung

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Bedienungsanleitung

MicroNet

MicroNet SP1200A Bedienungsanleitung

Ruijie

Ruijie RG-PF2920 Series Installations- und Betriebsanleitung

Altinex

Altinex DA1914SX Bedienungsanleitung

MiLAN

MiLAN MIL-SM2401M Bedienungsanleitung

RJM

RJM MASTERMIND PBC/6X Bedienungsanleitung

Atlas

Atlas MMK-KVM8 Bedienungsanleitung