Agilent Technologies U2121A-101 RF Bedienungsanleitung

Agilent Technologies

Agilent U2121A-101 RF

Switch Driver Board

Operating Guide

U2931A Operating Guide.book Page I Tuesday, June 10, 2008 10:17 AM

II U2121A-101 Operating Guide

Notices

® Agilent Technologies, Inc. , 2008

No part of this manual may be reproduced in

any form or by any means (including elec-

tronic storage and retrieval or translation

into a foreign language) without prior agree-

ment and written consent from Agilent

Technologies, Inc. as governed by United

States and international copyright laws.

Manual Part Number

U2931-90001

Edition

Second Edition, June 6, 2008

Agilent Technologies, Inc.

3501 Stevens Creek Blvd.

Santa Clara, CA 95052 USA

Warranty

The material contained in this docu-

ment is provided “as is,” and is sub-

ject to being changed, without notice,

in future editions. Further, to the max-

imum extent permitted by applicable

law, Agilent disclaims all warranties,

either express or implied, with regard

to this manual and any information

contained herein, including but not

limited to the implied warranties of

merchantability and fitness for a par-

ticular purpose. Agilent shall not be

liable for errors or for incidental or

consequential damages in connec-

tion with the furnishing, use, or per-

formance of this document or of any

information contained herein. Should

Agilent and the user have a separate

written agreement with warranty

terms covering the material in this

document that conflict with these

terms, the warranty terms in the sep-

arate agreement shall control.

Technology Licenses

The hardware and/or software described in

this document are furnished under a license

and may be used or copied only in accor-

dance with the terms of such license.

Restricted Rights Legend

U.S. Government Restricted Rights. Soft-

ware and technical data rights granted to

the federal government include only those

rights customarily provided to end user cus-

tomers. Agilent provides this customary

commercial license in Software and techni-

cal data pursuant to FAR 12.211 (Technical

Data) and 12.212 (Computer Software) and,

for the Department of Defense, DFARS

252.227-7015 (Technical Data - Commercial

Items) and DFARS 227.7202-3 (Rights in

Commercial Computer Software or Com-

puter Software Documentation).

Safety Notices

CAUTION

A CAUTION notice denotes a haz-

ard. It calls attention to an operat-

ing procedure, practice, or the like

that, if not correctly performed or

adhered to, could result in damage

to the product or loss of important

data. Do not proceed beyond a

CAUTION notice until the indicated

conditions are fully understood and

met.

WARNING

A WARNING notice denotes a

hazard. It calls attention to an

operating procedure, practice, or

the like that, if not correctly per-

formed or adhered to, could result

in personal injury or death. Do not

proceed beyond a WARNING

notice until the indicated condi-

tions are fully understood and

met.

Trademark Acknowledgements

Pentium is a U.S. registered trademark of

Intel Corporation.

Microsoft, Visual Studio, Windows, and MS

Windows are trademarks of Microsoft Cor-

poration in the United States and/or other

countries.

U2931A Operating Guide.book Page II Tuesday, June 10, 2008 10:17 AM

U2121A-101 Operating Guide III

Safety Symbols

The following symbols on the instrument and in the documentation

indicate precautions, which must be taken to maintain safe operation of

the instrument.

Direct current (DC)

Equipment protected throughout by

double insulation or reinforced

insulation

Alternating current (AC) Off (supply)

Both direct and alternating current On (supply)

Three-phase alternating current Caution, risk of electric shock

Earth (ground) terminal

Caution, risk of danger (refer to this

manual for specific Warning or Caution

information)

Protective conductor terminal Caution, hot surface

Frame or chassis terminal Out position of a bi-stable push control

Equipotentiality In position of a bi-stable push control

U2931A Operating Guide.book Page III Tuesday, June 10, 2008 10:17 AM

IV U2121A-101 Operating Guide

General Safety Information

WARNING

• Do not load the output terminals above the specified current limits.

• Do not use the device if it appears damaged or defective.

• Observe all markings on the device before connecting any wiring to

the device.

• Do no operate the device in the presence of flammable gases or

fumes.

• Do no install substitute parts or perform any unauthorized

modification to the device.

CAUTION

•Applying excessive voltage or overloading the device will cause

irreversible damage to the circuitry.

•Use the device with the cables provided.

•Repair or service that is not covered in this manual should only be

performed by qualified personnels.

•To avoid ESD damage to the RF switch driver board, users are highly

recommended to comply with the following cautions:

•User are required to discharge themselves to any large metal object

(e.g. Shelf, desk, etc.) prior to operating the RF switch driver board.

•Operate the RF switch driver board under an ESD protected workstation,

with the minimum requirements of using wrist strap (connected to ground)

and ESD pad. The wrist strap can be grounded by connecting to the power

supply ground and/or circuit board ground.

•Avoid human body contact or a charged material to the on-board components

and circuitries. Always hold the board edges when carrying the RF switch driver

board.

U2931A Operating Guide.book Page IV Tuesday, June 10, 2008 10:17 AM

U2121A-101 Operating Guide V

Environmental Conditions

This instrument is designed for indoor use and in an area with low

condensation. The table below shows the general environmental

requirements for this instrument.

Environmental conditions Requirements

Operating temperature 0 °C to 40 °C

Storage temperature –40 °C to 70 °C

Operating humidity Up to 85% at 40 °C (non-condensing)

Storage humidity 5% to 90% RH (non-condensing)

CAUTION

The U2121A-101 RF switch driver board complies with the following safety

and EMC requirements.

•IEC 61326-2002/EN 61326:1997+A1:1998+A2:2001+A3:2003

•Canada: ICES-001:2004

•Australia/New Zealand: AS/NZS CISPR11:2004

•IEC 61010-1:2001/EN 61010-1:2001 (2nd edition)

U2931A Operating Guide.book Page V Tuesday, June 10, 2008 10:17 AM

VI U2121A-101 Operating Guide

Regulatory Markings

The CE mark is a registered trademark

of the European Community. This CE

mark shows that the product complies

with all the relevant European Legal

Directives.

The C-tick mark is a registered

trademark of the Spectrum

Management Agency of Australia.

This signifies compliance with

the Australia EMC Framework

regulations under the terms of the

Radio Communication Act of 1992.

ICES/NMB-001 indicates that this

ISM device complies with the

Canadian ICES-001.

Cet appareil ISM est confomre a la

norme NMB-001 du Canada.

This instrument complies with the

WEEE Directive (2002/96/EC)

marking requirement. This affixed

product label indicates that you must

not discard this electrical/electronic

product in domestic household waste.

This symbod indicates that a device,

or part of a device, may be susceptible

to electrostatic discharges (ESD),

which can result in damage to the

product. Observe ESD precautions

given on the product, or its user

documentation, when handling

equipment bearing this mark.

U2931A Operating Guide.book Page VI Tuesday, June 10, 2008 10:17 AM

U2121A-101 Operating Guide VII

Waste Electrical and Electronic Equipment (WEEE) Directive

2002/96/EC

This instrument complies with the WEEE Directive (2002/96/EC) marking

requirement. This affixed product label indicates that you must not discard

this electrical/electronic product in domestic household waste.

Product Category:

With reference to the equipment types in the WEEE directive Annex 1, this

instrument is classified as a “Monitoring and Control Instrument” product.

The affixed product label is shown as below.

Do not dispose in domestic household waste

To return this unwanted instrument, contact your nearest Agilent

Te c h no l o gi e s , o r vi si t :

www.agilent.com/environment/product

for more information.

U2931A Operating Guide.book Page VII Tuesday, June 10, 2008 10:17 AM

VIII U2121A-101 Operating Guide

DECLARATION OF CONFORMITY

According to EN ISO/IEC 17050-1:2004

Generic example

Manufacturer’s Name: Agilent Technologies Microwave Products (M) Sdn. Bhd

Manufacturer’s Address: Bayan Lepas Free Industrial Zone,

11900, Bayan Lepas, Penang, Malaysia

Declares under sole responsibility that the product as originally delivered

Product Name: Agilent RF Switch Board

Models Number: U2931A

Product Options: This declaration covers all options of the above product(s)

complies with the essential requirements of the following applicable European Directives, and

carries the CE marking accordingly:

Low Voltage Directive (2006/95/EC)

EMC Directive (2004/108/EC)

and conforms with the following product standards:

EMC Standard

StandardStandard

Standard

Limit

LimitLimit

Limit

IEC 61326:2002 / EN 61326:1997+A1:1998+A2:2001+A3:2003

CISPR 11:1990 / EN55011:1990 Class A Group 1

IEC 61000-4-2:1995 / EN 61000-4-2:1995 4 kV CD, 8 kV AD

IEC 61000-4-3:1995 / EN 61000-4-3:1996 3 V/m, 80-1000 MHz

IEC 61000-4-4:1995 / EN 61000-4-4:1995 0.5 kV signal lines, 1 kV power lines

IEC 61000-4-5:1995 / EN 61000-4-5:1995 0.5 kV line-line, 1 kV line-ground

IEC 61000-4-6:1996 / EN 61000-4-6:1996 3 V, 0.15-80 MHz

IEC 61000-4-11:1994 / EN 61000-4-11:1994 1 cycle / 100%

Canada: ICES-001:2004

Australia/New Zealand: AS/NZS CISPR11:2004

The product was tested in a typical configuration with Agilent Technologies test systems.

Safety

IEC 61010-1:2001 / EN 61010-1:2001

Additional Information:

The U2931A receives power from an AC/DC power supply model DSA-60W-20 1 24060.

This DoC applies to above-listed products placed on the EU market after:

31-March-2008

Date

Tay Eng Su

Quality Manager

For further information, please contact your local Agilent Technologies sales office, agent or distributor,

or Agilent Technologies Deutschland GmbH, Herrenberger Straße 130, 71034 Böblingen, Germany.

Template: A5971-5302-2, Rev. E U2931A DoC Revision 1.0

U2931A Operating Guide.book Page VIII Tuesday, June 10, 2008 10:17 AM

U2121A-101 Operating Guide IX

Product Regulations

Performance Criteria

IEC 61326-1:2002 / EN 61326-1:1997+A1:1998+A2:2001+A3:2003

CISPR 11:1990 / EN 55011:1990

– Group 1 Class A

IEC 61000-4-2:1995 / EN 61000-4-2:1995

(ESD 4kV CD, 8kV AD) A

IEC 61000-4-3:1995 / EN 61000-4-3:1996

(3V/m, 80% AM) A

IEC 61000-4-4:1995 / EN 61000-4-4:1995

(EFT 0.5kV line-line, 1kV line-earth) A

IEC 61000-4-5:1995 / EN 61000-4-5:1995

(Surge 0.5kV line-line, 1kV line-earth) A

IEC 61000-4-6:1996 / EN 61000-4-6:1996

(3V, 0.15~80 MHz, 80% AM, power line) A

IEC 61000-4-11:1994 / EN 61000-4-11:1994

(Dips 1 cycle, 100%) A

Canada: ICES-001:2004

Australia/New Zealand: AS/NZS CISPR11:2004

EMC

IEC 61010-1:2001 / EN 61010-1:2001

Safety

Additional Information:

The product herewith complies with the essential requirements of the Low Voltage Directive 2006/95/EC and the

EMC Directive 2004/108/EC and carries the CE Marking accordingly (European Union).

Performance Criteria:

A Pass - Normal operation, no effect.

B Pass - Temporary degradation, self recoverable.

C Pass - Temporary degradation, operator intervention required.

D Fail - Not recoverable, component damage.

N/A – Not applicable

Notes:

Regulatory Information for Canada

ICES/NMB-001:2004

This ISM device complies with Canadian ICES-001.

Cet appareil ISM est confomre à la norme NMB-001 du Canada.

Regulatory Information for Australia/New Zealand

This ISM device complies with Australian/New Zealand AS/NZS CISPR11:2004

U2931A Operating Guide.book Page IX Tuesday, June 10, 2008 10:17 AM

XU2121A-101 Operating Guide

U2931A Operating Guide.book Page X Tuesday, June 10, 2008 10:17 AM

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Agilent Technologies Schalten Handbücher

Agilent Technologies

Agilent Technologies 86062C Bedienungsanleitung

Agilent Technologies

Agilent Technologies Agilent E6474A Bedienungsanleitung

Agilent Technologies

Agilent Technologies 34950A Bedienungsanleitung

Agilent Technologies

Agilent Technologies L4445A Bedienungsanleitung

Agilent Technologies

Agilent Technologies 86060C Series Bedienungs- und Sicherheitshinweise

Agilent Technologies

Agilent Technologies B2200A Bedienungsanleitung

Agilent Technologies

Agilent Technologies Agilent 34980A Bedienungsanleitung

Agilent Technologies

Agilent Technologies Agilent 3499A Bedienungsanleitung

Agilent Technologies

Agilent Technologies Agilent E5250A Bedienungsanleitung

Agilent Technologies

Agilent Technologies 34970A Bedienungsanleitung

Agilent Technologies

Agilent Technologies Agilent 34980A Bedienungsanleitung

Agilent Technologies

Agilent Technologies Switch/Measure Bedienungsanleitung

Agilent Technologies

Agilent Technologies 34972A Bedienungsanleitung

Agilent Technologies

Agilent Technologies 86060C Series Bedienungsanleitung

Agilent Technologies

Agilent Technologies E1364A Bedienungsanleitung

Agilent Technologies

Agilent Technologies 34937A Bedienungsanleitung

Agilent Technologies

Agilent Technologies Agilent 34980A Bedienungsanleitung

Agilent Technologies

Agilent Technologies 3488 Bedienungsanleitung

Agilent Technologies

Agilent Technologies 34945A Bedienungsanleitung

Agilent Technologies

Agilent Technologies Series N6700 Bedienungsanleitung

Agilent Technologies

Agilent Technologies 75000 Series C Bedienungsanleitung

Agilent Technologies

Agilent Technologies 8710 Series Service-Handbuch

Agilent Technologies

Agilent Technologies E1463A Betriebsanleitung

Agilent Technologies

Agilent Technologies 3488A Kurzanleitung

Beliebte Schalten Handbücher anderer Marken

URC

URC Total Control MFS-8 Bedienungsanleitung

Azbil

Azbil HPQ-D11 Bedienungsanleitung

Sony

Sony DFS-900M Bedienungsanleitung

SICK

SICK i17S Bedienungsanleitung

F&F

F&F SZR-277 Bedienungsanleitung

Shure

Shure UAMS/BK Bedienungsanleitung

Dräger

Dräger X-zone Switch Off Bedienungsanleitung

Asco

Asco Joucomatic 349 Series Bedienungsanleitung

BT Mini Hub Bedienungsanleitung

D-Link

D-Link DES-1226G Bedienungsanleitung

Johnson Controls

Johnson Controls FS80-C Bedienungsanleitung

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Bedienungsanleitung

MicroNet

MicroNet SP1200A Bedienungsanleitung

Ruijie

Ruijie RG-PF2920 Series Installations- und Betriebsanleitung

Altinex

Altinex DA1914SX Bedienungsanleitung

MiLAN

MiLAN MIL-SM2401M Bedienungsanleitung

RJM

RJM MASTERMIND PBC/6X Bedienungsanleitung

Atlas

Atlas MMK-KVM8 Bedienungsanleitung