Agilent Technologies 41900A Bedienungsanleitung

The test & measurement

equipment you need at

the price you want.

Alltest carries the world’s largest selection of

used/refurbished benchtop test & measurement

equipment at 50% the price of new.

Our equipment is guaranteed working, warrantied, and

available with certified calibration from our in-house staff

of technicians and engineers.

• 10+ full time technicians with over 150 years of

specialization

• 90 day warranty & 5 day right of return on all

equipment

•

• 1-3 year warranties for new and

premium-refurbished equipment

• Every unit tested to OEM specifications

• Satisfaction guaranteed

You have plans, we will help you achieve them.

Any project. Any budget.

Get a quote today!

CCall (732) 919-3339 or email sales@alltest.net.

Alltest Instruments, Inc.

500 Central Ave.

Farmingdale, NJ 07727

P: (732) 919-3339

F: (732) 919-3332

alltest.net

sales@alltest.net

Agilent 41900A PI-Network T

est Fixture

Operation and Service Manual

Agilent Part No. 41900-90020

Printed in JAPAN January 2000

Fourth Edition

Notice

The information contained in this document is subject to change without notice

This document contains proprietary information that is protected by copyright. All rights are

reserved. No part of this document may be photocopied, reproduced, or translated to another

language without the prior written consent of the Agilent T

echnologies .

Agilent T

echnologies Japan, Ltd.

Component T

est PGU-Kobe

1-3-2, Murotani, Nishi-ku, Kobe-shi,

Hyogo

,651-2241 Japan

arranty

This Agilent T

echnologies instrument product is warranted against defects in material and

workmanship for aperiod of three months from the date of shipment, except that in the case

of certain components listed in this manual, the warranty shall be for the specied period.

During the warranty period, Agilent T

echnologies will, at its option, either repair or replace

products that prove to be defective

or warranty service or repair

,this product must be returned to aservice facility designed

by Agilent T

echnologies .The Buyer shall prepay shipping charges to Agilent T

echnologies

and Agilent T

echnologies shall pay shipping charges to return the product to the Buyer

However

,the Buyer shall pay all shipping charges

, duties

,and taxes for products returned to

Agilent T

echnologies from another country

Agilent T

echnologies warrants that its software and rmware designed by Agilent T

echnologies

for use with an instrument will execute its programming instruction when property installed on

that instrument. Agilent T

echnologies does not warrant that the operation of the instrument,

or software

,orrmware will be uninterrupted or error free

Limitation of W

arranty

The foregoing warranty shall not apply to defects resulting from improper or inadequate

maintenance by the Buyer, Buyer-supplied software or interfacing, unauthorized modication

or misuse, operation outside of the environmental specications for the product, or improper

site preparation or maintenance

No other warranty is expressed or implied. A

gilent Technologies specically disclaims the

implied warranties of merchantability and tness for a particular purpose

Certication

The Agilent T

echnologies certies that this product met its published specications at the

time of shipment from the factory

. Agilent T

echnologies further certies that its calibration

measurements are traceable to the United States National Institute of Standards and

Technology, to the extent allowed by the Institute's calibration facility, or to the calibration

facilities of other International Standards Organization members.

Exclusive Remedies

The remedies provided herein are the buyer's sole and exclusive remedies. Agilent Technologies

shall not be liable for any direct, indirect, special, incidental, or consequential damages,

whether based on contract, tort, or any other legal theory

Assistance

Product maintenance agreements and other customer assistance agreements are available for

Agilent Technologies products.

If you need assistance, contact your nearest Agilent T

echnologies Sales and Service Oce

ddresses are provided at the back of this manual.



Manual Printing History

The manual printing date and part number indicate its current edition. The printing date

changes when anew edition is printed. (Minor corrections and updates that are incorporated

at reprint do not cause the date to change.) The manual part number changes when extensive

technical changes are incorporated.

January 1995

:::::: :: :::::::::::::::::::::

:::: :: ::::::

First Edition (part number: 41900-90000)

ugust 1996

::::: ::::

::::::::::::::::::::: :: :: :::::

Second Edition (part number: 41900-90010)

March 1998

:::::: :: :: :::::::::::::::::::

:::: :::::::

Third Edition (part number: 41900-90010)

January 2000

::::

:::: :::::::::::::::::::

:::

ourth Edition (part number: 41900-90020)

Safety Summary

The following general safety precautions must be observed during all phases of operation,

service

,and repair of this instrument. F

ailure to comply with these precautions or with specic

ARNINGS

given elsewhere in this manual violates safety standards of design, manufacture,

and intended use of the instrument.

The A

gilent T

echnologies assumes no liability for the customer's failure to comply with these

requirements

Do NOT Operate in an Explosive Atmosphere

not

operate the instrument in the presence of ammable gasses or fumes

.Operation of any

electrical instrument in such an environment constitutes asafety hazard.

eep A

way from Live Circuits

Operating personnel must not remove instrument covers

.Component replacement and

internal adjustments must be made only by qualied maintenance personnel. Do not replace

components with the power cable connected. Under certain conditions

, dangerous voltages

may exist even with the power cable removed. T

oavoid injury

,always disconnect power and

discharge circuits before touching them.

Do NOT Service or A

djust While Alone

not

attempt internal service or adjustment unless another person, capable of turning o

power and capable of rendering rst aid and resuscitation, is present.

Do NOT Substitute P

arts or Modify Instrument

Because of the danger of introducing additional hazards

,do

not

substitute parts or perform

unauthorized modications to the instrument. Return the instrument to aAgilent T

echnologies

Sales and Service Oce for service and repair to ensure the safety features are maintained.

Dangerous Procedure Warnings

arnings

,such as the example below

,precede

TENTIALL

ANGEROUS PROCEDURES

throughout this manual. Instructions contained in the

warnings

must be followed.

Warning

Dangerous voltages

,capable of causing death, are present in this

instrument. Use extreme caution when handling, testing, and adjusting

this instrument.

Safety Symbols

General denitions of safety symbols used on equipment or in manuals:

Instruction manual symbol. The product will be marked with this symbol

when it is necessary for the user to refer to the instruction manual in order to

protect against damage to the instrument.

Indicates dangerous voltage (terminals fed from the interior by voltage

exceeding 1000 volts must be so marked).

Protective ground terminal. F

or protection against electrical shock in case of

afault in the instrument. Used with wiring terminals to indicate the terminal

that must be connected to ground before operating equipment.

Low-noise or noiseless

,clean ground (earth) terminal. Used for a signal

common, as well as providing protection against electrical shock in case

of afault in the instrument. A terminal marked with this symbol must be

connected to ground in the manner described in the installation (Operation)

manual, and before operating the equipment.

Frame or chassis terminal. Aconnection to the frame (chassis) of the

equipment that normally includes all exposed metal structures

Alternating current (power line).

Direct current (power line).

Alternating or direct current (power line).

arning

denotes ahazard. It calls attention to aprocedure

,practice

condition or the like

,which, if not correctly performed or adhered to

,could

result in

injury

death

to personnel.

Caution

denotes ahazard. It calls attention to aprocedure

,practice

,condition

or the like

,which, if not correctly performed or adhered to

,could result in

damage

to or

destruction

of part or all of the product.

Note

denotes important information. It calls attention to a procedure

practice

,condition or the like

,which is essential to highlight.

Contents

1. General Information

Introduction ..................

.........1-1

Specications ..................

........1-1

or the 41900A .................

.........1-1

or the 41900A used with the 87510A ............... .. ..1-1

or the 41900A used with the E5100A/B .............

.1-2

Supplemental P

erformance Characteristics .............

.1-3

or the 41900A ............... ..

.............1-3

2. Preparation for Use

Introduction . .......................

.....2-1

Initial Inspection ................. .. ............2-1

Repackaging the 41900A for Shipment .............. .. .. ..2-5

3. Operation

Introduction ..................

.............3-1

Connecting the 41900A for Use ........................3-1

Assembling the C

dapter Board (Option 001) ........

........3-2

Using the Sample Programs (Option 001) ...................3-5

Connecting the 41900A to the 87510A,E5100A/B .......

.......3-5

Executing the Sample Program ...........

............3-5

4. Service

Introduction ......

......................... 4-1

41900A Replaceable P

arts . ..

................... 4-1

Contents-1

Figures

1-1. Circuit model of the calibration standards ................

.. 1-2

2-1. 41900A PI-Network T

est Fixture Product Overview ............. 2-2

2-2. Option 001 Load Capacitor A

dapter Kit Product Overview .......... 2-4

3-1. Connecting the 41900A to the 87510A,E5100A/B ............

.. 3-1

3-2. C

Adapter Board Circuit Diagram .................... . 3-2

3-3. C

Location .................... .. ......3-4

3-4. SHORT and LO

AD Calibration .............

......3-7

3-5. C

dapter Board Insertion ................. .. ......3-8

3-6. Load Capacitance A

djustment .................. .....3-9

4-1. Replaceable P

arts .............................4-2

ables

1-1. P

arameters ......................

..........1-2

1-2. P

arameters ................................1-2

2-1. 41900A Contents .............................2-3

2-2. Option 001 Contents ............................2-4

3-1. Example of C

Combinations . ...................3-3

3-2. Contents of Disk ...............

.............3-5

3-3. P

arameters Measured ................. ..........3-9

4-1. Replaceable P

arts ................. ............4-3

Contents-2

General Information

Introduction

The purpose of this manual is to enable you to use your 41900A PI-Network T

est Fixture

eciently and condently

. This manual contains the following:

The specications of the 41900A (see this chapter).

Installing the 41900A (see chapter 2).

Operating the 41900A (see chapter 3).

Ordering replaceable parts for the 41900A (see chapter 4).

Specications

This section lists the complete 41900A specications

.These specications are the performance

standards and limits against which the 41900A is tested. When shipped from the factory

,the

41900A meets the following specications:

or the 41900A

vailable T

est Device

:::: :::::::::::::::::::::::

::::::::::::::::::::

Leaded Crystal Resonator

vailable Measurement Conguration

:::

Direct Measurement or Measurement with Load

Capacitor

Dimensions

PI-Network Test Fixture Main Assembly

::::::::::::

approx. 30 (H)

50 (W)

110 (D) mm

eight

PI-Network Test Fixture Main Assembly

::::::::::::::::::

::::::::::::::::

approx. 0.4 kg

For the 41900A used with the 87510A

The following specications show the performance when the 41900A is used with the 87510A

Gain-Phase Analyzer:

Calibration method

:::: ::: :: :: :: ::: :: :: :: :: ::: :: :: ::

3-term calibration (OPEN/SHORT/LO

AD)

(at the measurement terminal to which a device under test (DUT) is connected)

Circuit model of the calibration standards

OPEN Capacitance :

SHORT and LO

AD Impedance @ frequency





f L

General Information 1-1

Andere Agilent Technologies Prüfgeräte Handbücher

Agilent Technologies

Agilent Technologies InfiniiVision 7000A Series Handbuch

Agilent Technologies

Agilent Technologies 83480A Bedienungsanleitung

Agilent Technologies

Agilent Technologies 100 Bedienungsanleitung

Agilent Technologies

Agilent Technologies InfiniiVision 5000 Series Bedienungsanleitung

Agilent Technologies

Agilent Technologies E6198B Bedienungsanleitung

Agilent Technologies

Agilent Technologies TS-5400 Stücklistenhandbuch

Agilent Technologies

Agilent Technologies 11645A Series Handbuch

Agilent Technologies

Agilent Technologies Medalist x6000 Technische Daten

Agilent Technologies

Agilent Technologies Auroraduet N1726A Bedienungsanleitung

Agilent Technologies

Agilent Technologies InfiniiVision 6000 Series Bedienungsanleitung

Agilent Technologies

Agilent Technologies 16034E Bedienungsanleitung

Agilent Technologies

Agilent Technologies HP 83711A Bedienungsanleitung

Agilent Technologies

Agilent Technologies 3000 Series Bedienungsanleitung

Agilent Technologies

Agilent Technologies N5230AU-974 Installations- und Betriebshandbuch

Agilent Technologies

Agilent Technologies BERT Serial Bedienungsanleitung

Agilent Technologies

Agilent Technologies U1452A Bedienungsanleitung

Agilent Technologies

Agilent Technologies InfiniiVision 3000 X-Series Bedienungsanleitung

Agilent Technologies

Agilent Technologies 85057B Handbuch

Agilent Technologies

Agilent Technologies J2126A Installations- und Betriebshandbuch

Agilent Technologies

Agilent Technologies 85105A Option 50 Installations- und Betriebshandbuch

Agilent Technologies

Agilent Technologies 81250 Bedienungsanleitung

Agilent Technologies

Agilent Technologies auroraSonata Bedienungsanleitung

Agilent Technologies

Agilent Technologies N9360A Betriebsanleitung

Agilent Technologies

Agilent Technologies XX3625 Bedienungsanleitung

Beliebte Prüfgeräte Handbücher anderer Marken

SMART

SMART KANAAD SBT XTREME 3G Series Bedienungsanleitung

Vernier

Vernier Go Direct Voltage Bedienungsanleitung

Lifeloc

Lifeloc R.A.D.A.R. Bedienungsanleitung

Fluke

Fluke T5-600 Bedienungs- und Montageanleitung

Mercury

Mercury TSL01 Bedienungsanleitung

MAHA

MAHA MBT Series Bedienungsanleitung

Fuji Electric

Fuji Electric P-61 Bedienungsanleitung

ETC

ETC SealerAtor Bedienungsanleitung

Skyfine

Skyfine ETHYWAY V2 Bedienungsanleitung

Appion

Appion G5 Twin Bedienungsanleitung

PCB Piezotronics

PCB Piezotronics 8159-0112A Bedienungsanleitung

BW Technologies

BW Technologies MicroDock II Bedienungsanleitung

Sun Nuclear

Sun Nuclear 1027 Bedienungsanleitung

Biomark

Biomark HPR LITE READER Bedienungsanleitung

Hioki

Hioki 3169-20 Bedienungsanleitung

Ashcroft

Ashcroft ATE-100 Bedienungsanleitung

Rohde & Schwarz

Rohde & Schwarz RTA4000 Bedienungsanleitung

Ritmix

Ritmix RAT-701 Bedienungsanleitung