Agilent Technologies G6696A Bedienungsanleitung

Agilent Technologies

Agilent G6696A

Oil Free IDP-3 Scroll

Pump for Turbo 597X

Installation Guide

Notices

No part of this manual may be reproduced

in any form or by any means (including

electronic storage and retrieval or transla-

tion into a foreign language) without prior

agreement and written consent from 

Agilent Technologies, Inc. as governed by

United States and international copyright

laws.

Manual Part Number

G6696-90010

Edition

First edition, July 2016

Printed in USA

Agilent Technologies, Inc.

2850 Centerville Road 

Wilmington, DE 19808-1610 USA

Warranty

The material contained in this docu-

ment is provided “as is,” and is sub-

ject to being changed, without notice,

in future editions. Further, to the max-

imum extent permitted by applicable

law, Agilent disclaims all warranties,

either express or implied, with regard

to this manual and any information

contained herein, including but not

limited to the implied warranties of

merchantability and fitness for a par-

ticular purpose. Agilent shall not be

liable for errors or for incidental or

consequential damages in connection

with the furnishing, use, or perfor-

mance of this document or of any

information contained herein. Should

Agilent and the user have a separate

written agreement with warranty

terms covering the material in this

document that conflict with these

terms, the warranty terms in the sep-

arate agreement shall control.

Safety Notices

CAUTION

A CAUTION notice denotes a hazard. It

calls attention to an operating

procedure, practice, or the like that, if

not correctly performed or adhered to,

could result in damage to the product

or loss of important data. Do not

proceed beyond a CAUTION notice

until the indicated conditions are fully

understood and met.

WARNING

A WARNING notice denotes a hazard.

It calls attention to an operating

procedure, practice, or the like that, if

not correctly performed or adhered to,

could result in personal injury or

death. Do not proceed beyond a

WARNING notice until the indicated

conditions are fully understood and

met.

Oil Free IDP-3 Scroll Pump for Turbo 597X Installation Guide 3

Contents

1 Introduction

General Information 6

Important Safety Warnings 7

General Safety Precautions 8

Cleaning 9

Recycling the Product 9

Parts Identification 9

Site Preparation 10

2 Installation

Unpacking the IDP-3 Pump 12

Assembling the Foreline Hose 13

Removing the Existing Foreline Pump from the MSD 16

Installing the IDP-3 Pump 18

4 Oil Free IDP-3 Scroll Pump for Turbo 597X Installation Guide

Agilent G6696A Oil Free IDP-3 Scroll Pump for Turbo 597X

Installation Guide

Agilent Technologies

Introduction

General Information 6

Important Safety Warnings 7

General Safety Precautions 8

Cleaning 9

Recycling the Product 9

Parts Identification 9

Site Preparation 10

This guide describes how to replace an Edwards, Pfeiffer, or

Agilent Rotary Vane Pump, or Pfeiffer Diaphragm pump, with

the Agilent G6696A Oil Free IDP-3 Scroll Pump for Turbo 597X

on Agilent Technologies Series 5973/75/77 MSD instruments.

6 Oil Free IDP-3 Scroll Pump for Turbo 597X Installation Guide

1Introduction

General Information

Model 597X MSD instruments with the Oil Free IDP-3 Scroll

Pump for Turbo 597X upgrade installed meet all safety and

compliance standards specified for the original instruments.

Refer to the original instrument instruction manuals for details.

Information

Oil Free IDP-3 Scroll Pump for Turbo 597X has been designed

and tested in accordance with recognized safety standards, and

is designed for use indoors. If it is used in a manner not

specified by the manufacturer, the protection provided by the

instrument may be impaired. Whenever the safety protection of

the Oil Free IDP-3 Scroll Pump for Turbo 597X has been

compromised, disconnect it from all power sources and secure it

against unintended operation.

Refer servicing to qualified service personnel. Substituting

parts or performing any unauthorized modification to the pump

may result in a safety hazard.

Safety symbols

Warnings and cautions in this guide or on the instrument must

be observed during all phases of operation, service, and repair

of this instrument. Failure to comply with these precautions

violates safety standards of design and the intended use of the

instrument. Agilent Technologies assumes no liability for the

customer’s failure to comply with these requirements.



WARNING:

Burn hazard



Indicates parts that may cause burns when

touched.

Introduction 1

Oil Free IDP-3 Scroll Pump for Turbo 597X Installation Guide 7

Important Safety Warnings

Safety cautions and warnings must be observed during all

phases of operation, service, and repair of an Oil Free IDP-3

Scroll Pump for Turbo 597X. Failure to comply with these

precautions violates safety standards of design, and may

compromise the intended use of the Oil Free IDP-3 Scroll Pump

for Turbo 597X. Agilent Technologies assumes no liability for

the customer’s failure to comply with these requirements.

WARNING

The pump is designed for operation with neutral or noncorrosive

gases. It is not designed to pump corrosive, or particulate forming

gases. Failure to adhere to this warning could result in personal

injury or death.

WARNING

Install the pump in an area that is not exposed to liquids, steam, or

excessive humidity. Failure to adhere to this warning may result in

electric shock, short circuits, and severe bodily injury.

8 Oil Free IDP-3 Scroll Pump for Turbo 597X Installation Guide

1Introduction

General Safety Precautions

•While running Oil Free IDP-3 Scroll Pump for Turbo 597X:

•Do not block air flow to the fan. Air flows into the front of

the pump (Figure 1).

•Do not set items on top of Oil Free IDP-3 Scroll Pump for

Turbo 597X.

•It is important that the Oil Free IDP-3 Scroll Pump for

Turbo 597X does not recirculate hot air. Always position

the front end of the Oil Free IDP-3 Scroll Pump for Turbo

597X where it can draw cool air.

•A pump exhibiting high surface temperature should be

turned off and allowed to cool.

•Although the pump can pump trace particulates normally

found in the atmosphere, it is not designed to process solids,

chemicals, powders, liquid solvents, condensates, or other

particulates. They can damage the equipment, degrade its

performance, or shorten its useful life.

•Do not place the pump near any equipment that is sensitive

to vibration.

•Never disturb the hex head bolts on either side of the pump.

Disturbing these bolts will cause loss of performance or

pump damage (Figure 1).

Figure 1 IDP-3 pump

Hex head bolt

Front of pump

Introduction 1

Oil Free IDP-3 Scroll Pump for Turbo 597X Installation Guide 9

Cleaning

To clean the Oil Free IDP-3 Scroll Pump for Turbo 597X:

•Clean the exterior surfaces of the IDP-3 with alcohol or mild

detergents only.

Recycling the Product

For recycling, contact your local Agilent sales office.

Parts Identification

Table 1 lists the contents of the Oil Free IDP-3 Scroll Pump for

Turbo 597X kit.

Table 1 Agilent G6696A Oil Free IDP-3 Scroll Pump for Turbo 597X

contents list

Part Quantity Part number

IDP-3 24V Dry scroll vacuum pump

with Isolation valve

1 G3870-80057

IDP-3 24V Power supply 1 G3870-60600

Foreline hose 1 05971-60119

KF16 Hose adapter 2 G1099-20531

KF25 Flange × 5/8 in. ID

Hose barb adapter

1 G1099-20532

KF16 Elbow - 45 degree 1 G2589-20141

KF16 Flange × 5/8 in. ID

Hose barb elbow

1 G2589-20041

Clamp, Hose .437 in. DIA .56 in.

WD SST

2 1400-3241

NW25 Centering ring with O-ring 1 0100-1551

Seal, CNTR RING, NW16, ALUM, Viton 2 KC16AV

NW 10/16 Hinged Clamp with

Wing nut, Al

2KQ16AWP

Exhaust filter cartridge 1 G7077-67017

Breather vent and Adapter 1 G7077-67016

IDP-3 Installation Guide 1 G6696-90010

10 Oil Free IDP-3 Scroll Pump for Turbo 597X Installation Guide

1Introduction

Site Preparation

Prepare the installation site in accordance with the site

preparation specifications associated with the MSD.

Additionally, ensure that the site also supports the criteria

specific to the Oil Free IDP-3 Scroll Pump for Turbo 597X, as

listed in Table 2.

NOTE

Where conflicts exist between these criteria and those of any co-located

equipment, the equipment with the tighter tolerances takes precedence.

Table 2 Site prep information

Criteria Description

Physical dimensions

Weight 9.5 kg (21 lbs)

Dimensions 358 × 140 × 181 cm (14.09 × 5.5 × 7.13 inches) 

(L × W × H)

Temperature and humidity ranges

Operating ambient

temperature

5 to 40 °C (41 to 108 °F)

Relative humidity 0 to 95 % (non-condensing)

Inhaltsverzeichnis

Andere Agilent Technologies Wasserpumpe Handbücher

Agilent Technologies

Agilent Technologies 1260 Infinity Bedienungsanleitung

Agilent Technologies

Agilent Technologies TwisTorr 305 FS Series Bedienungsanleitung

Agilent Technologies

Agilent Technologies SH-110 Bedienungsanleitung

Agilent Technologies

Agilent Technologies 1290 infinity Bedienungsanleitung

Agilent Technologies

Agilent Technologies InfinityLab LC Series Bedienungsanleitung

Agilent Technologies

Agilent Technologies TV-401/301 MS Bedienungsanleitung

Agilent Technologies

Agilent Technologies DS40M Bedienungsanleitung

Agilent Technologies

Agilent Technologies TriScroll 800 Bedienungsanleitung

Agilent Technologies

Agilent Technologies Infinity II 1290 Bedienungsanleitung

Agilent Technologies

Agilent Technologies G6697A IDP-10 Bedienungsanleitung

Agilent Technologies

Agilent Technologies TriScroll 620 Series Bedienungsanleitung

Agilent Technologies

Agilent Technologies MS 120 Major Installations- und Betriebsanleitung

Agilent Technologies

Agilent Technologies X3502-64170 Bedienungsanleitung

Agilent Technologies

Agilent Technologies TwisTorr 404 FS Bedienungsanleitung

Agilent Technologies

Agilent Technologies DS102 1Ph Bedienungsanleitung

Agilent Technologies

Agilent Technologies TV 551 Navigator Bedienungsanleitung

Agilent Technologies

Agilent Technologies HS-2 Bedienungsanleitung

Agilent Technologies

Agilent Technologies TriScroll 300 Bedienungsanleitung

Agilent Technologies

Agilent Technologies 1260 Infinity Bedienungsanleitung

Agilent Technologies

Agilent Technologies MS40-S Bedienungsanleitung

Agilent Technologies

Agilent Technologies 1100 Series Bedienungsanleitung

Agilent Technologies

Agilent Technologies TwisTorr 304 FS Bedienungsanleitung

Agilent Technologies

Agilent Technologies InfinityLab LC Series Bedienungsanleitung

Agilent Technologies

Agilent Technologies Infinity II SFC Binary 1260 Bedienungsanleitung

Beliebte Wasserpumpe Handbücher anderer Marken

Neptun

Neptun NPHW 5500 Bedienungsanleitung

Sensidyne

Sensidyne Gilian BDX-II Montage- und Bedienungsanleitung

Draper

Draper 47808 Bedienungsanleitung

Trolla

Trolla 12820 Bedienungsanleitung

Sunfab

Sunfab SVH Series Bedienungsanleitung

WilTec

WilTec 50740 Bedienungsanleitung

Fieldmann

Fieldmann FVC 5015 EK Bedienungsanleitung

Everbilt

Everbilt EFSUB5-122HD Bedienungsanleitung

Graco

Graco Husky 3300e Bedienungsanleitung

esotec

esotec 101018 Bedienungsanleitung

moyno

moyno 2000 CC Bedienungsanleitung

Becker

Becker BASIC VASF 2.80/1-0.AC230 Bedienungsanleitung

Sykes AmeriPumps

Sykes AmeriPumps GP100M Fehlerbehebungshandbuch

DUROMAX

DUROMAX XP WX Series Bedienungsanleitung

BRINKMANN PUMPS

BRINKMANN PUMPS SBF550 Bedienungsanleitung

Franklin Electric

Franklin Electric IPS Bedienungsanleitung

Xylem

Xylem e-1532 Series Bedienungsanleitung

Milton Roy

Milton Roy PRIMEROYAL Bedienungsanleitung