AJAX MotionCam Jeweller Bedienungsanleitung
MotionCam User manual
Updated January 27, 2023
MotionCam Jeweller is a wireless motion detector that supports photo verication.
Intended for indoor installation. It can recognize movement at a distance of up to
12 meters. Ignores pets when installed and congured correctly.
A hub is required for the detector to operate.
MotionCam works as part of the Ajax security system, communicating with the hub
over two secure radio protocols: the detector uses Jeweller to transmit alarms and
events and Wings to transmit photos. The hub communication range is up to 1,700
meters without obstacles.
List of compatible hubs and range extenders
Buy MotionCam detector with photo verication
A that supports and
is also available.
Functional elements
Compatible hubs and range extenders
version of the detector Photo on Demand Photos by Scenarios
1. LED indicator.
2. Motion detector lens.
3. Infrared backlight. It is used for night photos and low light conditions.
4. Camera.
5. SmartBracket mounting panel. To remove the panel, slide it down.
6. Perforated part of the mounting panel. Triggers a tamper in case of any
attempt to detach the detector from the surface. Do not break it off.
7. . Triggers when somebody attempts to detach the detector from
the surface or remove it from the mounting panel.
Tamper button
8. Power button.
9. Detector’s QR code/identier. It is used to connect the device to the Ajax
security system.
MotionCam requires a hub to operate. A list of compatible hubs and range
extenders is available in the table:
Hubs Radio signal range extenders
Connection to other , , , and
is not provided.
Operating principle
MotionCam Jeweller is a wireless motion detector supporting photo verication. It
detects motion with a build-in infrared sensor by capturing moving objects with a
temperature close to that of the human body. After motion is detected, the built-in
camera takes a series of photos, which allows you to dynamically assess what is
Hub 2 (2G)
Hub 2 (4G)
Hub 2 Plus
Hub Hybrid (2G)
Hub Hybrid (4G)
ReX 2
hubs radio signal range extenders ocBridge Plus
uartBridge
00:00
00:12
happening at the site, saving users from unnecessary anxiety, and security
companies from false calls of patrol.
As soon as an armed detector identies motion, it instantly sends an alarm to the
hub, which activates the sirens connected to the system, triggers scenarios, and
noties users and the security company. All MotionCam alerts and events are
recorded in the notication feed of the Ajax app.
Users know exactly where motion is detected. The notications contain the name
of the hub (the name of the secured facility), the name of the device, and the
to which the detector is assigned.
The detector doesn’t switch to the armed mode instantly. The switching time depends on
two factors: the exit delay (detector settings, Delay When Leaving/Entering) and the hub–
detector ping interval (hub settings, Jeweller or Jeweller/Fibra).
In the rst case, the delay is set by an administrator or a PRO user with system conguration
rights. In the second case, the delay occurs because the hub takes one ping interval to notify
the detector about the security mode changing.
virtual
room
How Ajax noties users of alarms
Photo verication
The detector alarms in the Ajax apps are accompanied by photos or an animated
series, depending on the selected viewing mode. The detector takes a photo only
when armed.
A that supports and isalso
available. In addition to photo by alarm, this detector can take photos on user’s demand as
well as photos by alarm of other Ajax detectors and devices.
The built-in camera of the detector can take from 1 to 5 photos with a resolution of
160 × 120 and 320 × 240 pixels, as well as up to 3 photos with a resolution of 640 ×
480 pixels.
To view the photos, click on the MotionCam alarm notication in the events feed.
Photos are available to all users with access to the events feed.
Learn more about Ajax motion detectors
version of the detector Photo on Demand Photos by Scenarios
A series of photos are played back in the application as animation. It helps to
evaluate the unfolding of the incident over time. You can also view all the photos
individually by clicking on the icon at the bottom of the screen.
The detector has infrared backlight for shooting in the dark, which activates when
there is insucient light. Under such conditions, MotionCam takes black-and-white
photos.
00:00
00:03
Photo verication can be saved as video or images by clicking the download icon.
Jeweller and Wings data transfer protocols
MotionCam uses the Jeweller technology to transmit alarms and events and the
Wings technology to transmit photos. These are two-way wireless data transfer
protocols that provide fast and reliable communication between a hub or a range
extender and the connected devices of the security system.
The protocols support oating key block encryption and device recognition on
every session to prevent sabotage and spoong.
To monitor connection with system devices and display their statuses Ajax apps
have a system of hub–detector polls with a frequency of 12 to 300 seconds. The
polling frequency is set by the user or PRO with administrator rights.
Features of alarm photo verication
Learn more
Photo delivery time
The photo delivery time to Ajax apps depends on the selected resolution, detector
connection method (to the hub directly or via the range extender), Wings signal
strength, and the Internet connection speed. The alarm messages are delivered
immediately.
Photo resolution
Delivery time
When connected
directly to the hub*
When connected to the
hub via ReX 2 (ReX 2
transmits photos via
Wings)**
When connected to the
hub via ReX 2 (ReX 2
transmits photos via
Ethernet)***
160 × 120 pixels up to 6 seconds up to 8 seconds up to 6 seconds
320 × 240 pixels
(default) up to 9 seconds up to 18 seconds up to 10 seconds
640 × 480 pixels up to 17 seconds up to 31 seconds up to 17 seconds
* The delivery time of one photo when the signal strength between the hub and
MotionCam is 2–3 bars and the hub is connected via Ethernet, Wi-Fi, or 4G.
** Values were calculated with a signal strength of 3 bars between ReX 2 and the
detector or between the hub and ReX 2. The hub works via Ethernet, Wi-Fi, or 4G.
*** Values were calculated with a signal strength of 3 bars between ReX 2 and the
detector. The hub is connected via Ethernet, Wi-Fi, or 4G.
Temperature compensation
Temperature compensation is a software mechanism that allows you to maintain
the thermal diagram contrast even if the ambient temperature is close to the
human body temperature.
With each ambient temperature measurement, the detector introduces a correction
according to the table of coecients stored in its memory — increases or
decreases the sensitivity of the IR sensor. This allows the detector to effectively
identify motion over the entire operating temperature range.
Pet immunity
When properly installed and congured, MotionCam does not react to animals up
to 50 centimeters tall and weighing up to 20 kilograms.
For this purpose, the detector is installed at a height of 2.4 meters in a place where
nothing obstructs its view — for example, in a corner of a room, where the view
won’t be blocked by closets or other furniture. Correct setting requires the accurate
choice of the detector sensitivity:
If MotionCam is installed below the recommended height, then the animals will
move in the high sensitivity zone. The detector can raise an alarm if a dog walks on
its hind legs or plays on an armchair. It will also raise an alarm if the animal is able
to jump to the level of the detector or move near it.
Sending events to the CMS
The Ajax security system can transmit alarms to the monitoring app
as well as the Central Monitoring Station (CMS) using SurGard (Contact ID), SIA
DC-09 (ADM-CID), ADEMCO 685, and other proprietary protocols. See a complete
list of supported protocols .
Learn more
High — the detector does not respond to cats (up to 25 cm tall).
Medium — it does not respond to small dogs (up to 35 cm tall).
Low — it does not respond to pets up to 50 cm tall.
Why motion detectors react to animals and how to avoid this
How to install MotionCam correctly
PRO Desktop
here
MotionCam Jeweller transmits the following events to the monitoring station:
When an alarm is received, the operator of the security company monitoring station
knows exactly what happened and where to send the fast response team.
Addressability of Ajax devices allows you to send not only events but also the type
of the device, the name assigned to it, and the room to the PRO Desktop or to the
CMS. Note that the list of transmitted parameters may differ depending on the type
of the CMS and the selected protocol for communication with the monitoring
station.
The ID and number of the device can be found in its .
Photos are sent to the security company’s monitoring station if the CMS software
supports photo verication. A list of such CMSs is . can
also receive photo verication without additional setup.
Adding to the system
Which CMSs can the Ajax security system be connected to
1. Motion alarm.
2. MotionCam visual alarm verications.
3. Photos by Scenarios.
4. Tamper alarm/recovery.
5. Hub connection loss/restoration.
6. Temporary deactivation/activation of the detector.
7. Unsuccessful attempt to arm the security system (with the
enabled).
system integrity
check
states in the Ajax app
available here PRO Desktop
Learn more about PRO Desktop
Inhaltsverzeichnis
Andere AJAX Sicherheitssensor Handbücher
AJAX
AJAX DualCurtain Outdoor Bedienungsanleitung
AJAX
AJAX GlassProtect Fibra Bedienungsanleitung
AJAX
AJAX FireProtect 2 Heat/CO Jeweller Bedienungsanleitung
AJAX
AJAX FireProtect Bedienungsanleitung
AJAX
AJAX DoorProtect Plus Bedienungsanleitung
AJAX
AJAX MotionProtect Curtain Bedienungsanleitung
AJAX
AJAX GlassProtect Bedienungsanleitung
AJAX
AJAX MotionProtect Bedienungsanleitung
AJAX
AJAX FireProtect 2 Jeweller Bedienungsanleitung
AJAX
AJAX LeaksProtect Bedienungsanleitung
AJAX
AJAX FireProtect Bedienungsanleitung
AJAX
AJAX DoorProtect Plus Jeweller Bedienungsanleitung
AJAX
AJAX DoorProtect Bedienungsanleitung
AJAX
AJAX GlassProtect Fibra Bedienungsanleitung
AJAX
AJAX FireProtect 2 Bedienungsanleitung
AJAX
AJAX DoorProtect Plus Bedienungsanleitung
AJAX
AJAX GlassProtect Bedienungsanleitung
AJAX
AJAX MotionProtect Bedienungsanleitung
AJAX
AJAX MotionProtect Fibra Bedienungsanleitung
AJAX
AJAX FireProtect 2 Jeweller Bedienungsanleitung
