AJAX MotionCam Bedienungsanleitung

MotionCam User Manual
Updated January 14, 2021
MotionCam is a wireless motion detector with visual alarm verication for
indoor use. It operates for up to 4 years on bundled batteries, detects movement
at up to 12 meters, ignores animals, but recognizes a human move instantly.
MotionCam works within Ajax security systems, connecting to a hub through the
two secure radio protocols. The detector uses   to transmit alarms and
events, and Wings to transmit photos. Wireless coverage may reach up 1,700 m
line-of-sight.
The detector is compatible only with   or  . Connection to  ,  ,
 radio signal range extender,   and   integration modules is
not supported!
The detector is congured via iOS, Android, macOS, and Windows-based 
. Users are alerted of all alarms and events via push notications, SMS, and
calls (if enabled).
Jeweller
Hub 2 Hub 2 Plus Hub Hub Plus
ReX ocBridge Plus uartBridge
Ajax
apps

The Ajax security system can be used for self-reliant monitoring, or can be

connected to a security company’s central monitoring station.

Functional Elements

Operating Principle

The infrared sensor of MotionCam detects intrusion into the secured premises

by identifying moving objects with a temperature close to that of the human

body. The function makes the detector effective

Buy MotionCam motion detector featuring visual alarm verication

1. LED indicator

2. Motion detector lens

3. Infrared illumination for shooting in the dark

4. Camera

5. SmartBracket mounting panel (the perforated part is necessary for tamper

activation in case of an attempt to detach the detector from the surface)

6. Tamper button

7. Power button

8. QR code

temperature compensation

inside premises with temperature ranging from 0 to +40°C. If placed and

adjusted properly, MotionCam ignores pets.

When movement is detected, the armed detector instantly transmits an alarm

signal to the hub. The hub activates the connected sirens and noties the user

and the security company. MotionCam uses radio protocol to transmit

alarms and events to the hub.

The built-in MotionCam camera can take from 1 to 5 shots with the resolution of

320×240 and up to 3 shots with the resolution of 640×480 pixels. A series of

photos is displayed in the app as an animation, so the user is able to evaluate

the unfolding of the event over time. Photos are available both in Ajax apps and

on the Central Monitoring Station software of the security company. MotionCam

uses Wings radio protocol to transmit photos to the hub.

The detector features infrared illumination for shooting in the dark, which is

activated only when triggering.

Photo delivery time in the Ajax apps depends on the resolution and the speed of

your internet connection. The table shows the delivery time for one photo at a

signal strength of 2-3 divisions between the hub and MotionCam and the hub

connected via Ethernet.

Photo resolution Delivery time

160 × 120 up to 7 s

Jeweller

320 × 240 (default setting) up to 9 s

640 × 480 up to 20 s

At the same time, an alarm is transmitted within 0.15 s.

Pairing the Detector with the hub

Before you start pairing the detector:

Please note that only a user with admin permissions can add devices to the hub.

To connect the detector:

For detection and pairing to occur, the device must be within a hub’s wireless coverage

(at the same facility).

1. Turn on the hub and check the Internet connection (via Ethernet cable

and/or GSM network).

2. Install the on your smartphone. Create an account, add the hub to

the app, and create at least one room.

Ajax app

3. Check the status of the hub in the app to make sure it is disarmed and is not

updating.

1. In the Ajax mobile app, tap Add Device.

2. Name the device, scan or enter manually the QR code (placed on the back of

the detector body or its packaging), select the room for placement.

3. Click Add. The countdown will start.

4. Turn on the device by holding its power button for 3 seconds. Please note

that the hub connection request is only sent for a short time while switching

on the device.

MotionCam turns off automatically within 6 seconds after activation if it fails to

connect to the hub. There is no need to turn off the device to retry.

If the device has already been paired with another hub, turn MotionCam off, and

then follow the standard pairing procedure.

After pairing, the detector will appear on the app’s hub device list. The frequency

of the device status updates depends on the polling interval indicated in the

hub’s settings (36 seconds by default).

Statuses

You can view MotionCam states in the detector menu.

Parameter Value

Temperature Detector temperature. Measured on the

processor and changes gradually

Jeweller Signal Strength

The strength of the signal for transmitting

alarms and events between the hub and the

detector

Battery Charge

Battery level of the device. Two states available:

Lid

The status of the detector’s tamper device that

responds to the detachment and removal

attempts.

Delay When Entering, sec

Entry delay (alarm activation delay) is the time

you have to disarm the security system after

entering the room

1. Ajax app Devices MotionCam

ОК

Battery discharged

How battery charge is displayed in

Ajax apps

What is delay when entering

Delay When Leaving, sec Delay time when exiting. Delay when exiting

(alarm activation delay) is the time you have to

exit the room after arming the security system

Connection Connection status between the hub and the

detector

Wings Signal Strength The strength of the signal for transmitting

photos from the detector to the hub

Camera Connection status between the hub and the

detector’s camera

Sensitivity Sensitivity level of the motion detector

Always Active If active, the detector is always in the armed

mode

Temporary Deactivation

Shows the status of the device temporary

deactivation function:

Firmware Detector rmware version

ID Device ID

Settings

You can adjust the device parameters in the settings section:

What is delay when leaving

No — the device operates normally and

transmits all events.

Lid only — the hub administrator has

disabled notications about triggering on

the device body.

Entirely — the device is completely excluded

from the system operation by the hub

administrator. The device does not follow

system commands and does not report

alarms or other events.

By number of alarms — the device is

automatically disabled when the number of

alarms is exceeded (specied in the settings

for Devices Auto Deactivation). The feature

is congured in the Ajax PRO app.

Settings Value

First eld Detector name (editable)

Room The virtual room to which the device can be

assigned

Sensitivity

MotionCam detector has three sensitivity levels:

Always Active

In Always Active mode, the detector always

registers motion. Regardless of whether the

system is armed, the detector will alert you

about any motion. Activate this mode if the

detector is installed in a room requires 24/7

monitoring.

Image resolution

MotionCam takes photos with the following

resolutions:

The higher the resolution, the more detailed the

image is, but it takes longer to transmit the

photos to the hub

Send photo in case of alarm

When triggered, the detector takes from 1 to 5

photos.

If the No photo option is selected, the detector

does not activate the camera when triggered.

1. Ajax app Devices MotionCam Settings

High — for rooms with a minimum amount

of obstacles; in this mode, the movement is

detected as quickly as possible.

Normal — for rooms with potential

obstacles: open windows, air conditioners,

heaters, etc.

Low — for rooms with a high amount of

obstacles; in this mode, the detector ignores

animals weighing under 20 kg and up to 50

cm tall

160 × 120

320 × 240

640 × 480

Alarms with photo verication MotionCam can take photos every time alarm is

raised or only while rst 1 to 10 activations. The

limit is reset once the security system is

disarmed

Delay When Entering, sec

Selecting delay time when entering. Delay when

entering (alarm activation delay) is the time you

have to disarm the security system after

entering the room

Delay When Leaving, sec

Selecting the delay time when exiting. Delay

when exiting (alarm activation delay) is the time

you have to exit the room after arming the

security system

Delays in Night Mode

Activation of the delay when Night mode is

enabled

Arm in Night Mode

If active, the detector switches to the armed

mode when night mode is enabled

Alarm LED indication

Allows you to disable the ashing of the LED

indicator during an alarm. Available for devices

with rmware version 5.55.0.0 or higher

Alert with a siren if motion is detected If active, added to the systemare

activatedwhen motion is detected.

Jeweller Signal Strength Test Switches the detector to the Jeweller signal

strength test mode. The test checks the signal

strength between the hub and the detector, and

helps to determine the optimum installation

place

What is delay when entering

What is delay when leaving

What is night mode

How to nd the rmware version or

the ID of the detector or device?

sirens

What is Signal Strength Test

Wings Signal Strength Test

Switches the detector to the Wings signal

strength test mode. The test checks the signal

strength between the hub and the detector, and

helps to determine the optimum installation

place

Detection Zone Test

Switches the detector to the detection zone test

mode. The test checks how the detector

responds to motion and determines the

optimum installation place

Attenuation Test

Switches the detector into the signal

attenuation test mode

Temporary Deactivation

Allows the user to disconnect the device

without removing it from the system.

Two options are available:

The system can also automatically disable

devices when the set number of alarms is

exceeded.

User Guide Opens the detector User Manual

Unpair Device Unpairs the detector, disconnects it from the

hub, and deletes its settings

What is Detection Zone Test

What is Attenuation Test

Entirely— the device will not execute

system commands or participate in

automation scenarios, and the system will

ignore device alarms and other notications

Lid only— the system will ignore only

notications about the triggering of the

device tamper button

Learn more about temporary

deactivation of devices

Learn more about auto deactivation

of devices

Photo Verication of Alarms in Ajax apps

If the Send photo in case of alarm option is enabled in the MotionCam settings,

detector alarms will be accompanied by photos or animations in Ajax apps.

To view photos, click on the alert notication in the events feed.

To save the photo, click on the appropriate button.

A series of photos is displayed in the app as an animation, so the user is able to

evaluate the unfolding of the event over time.

Andere Handbücher für MotionCam

Inhaltsverzeichnis

Andere AJAX Sicherheitssensor Handbücher

AJAX

AJAX LeaksProtect Bedienungsanleitung

AJAX

AJAX MotionProtect Bedienungsanleitung

AJAX

AJAX CombiProtect Bedienungsanleitung

AJAX

AJAX MotionProtect Plus Bedienungsanleitung

AJAX

AJAX DoorProtect Bedienungsanleitung

AJAX

AJAX DoorProtect Plus Bedienungsanleitung

AJAX

AJAX LeaksProtect Bedienungsanleitung

AJAX

AJAX DoorProtect Bedienungsanleitung

AJAX

AJAX FireProtect 2 Jeweller Bedienungsanleitung

AJAX

AJAX FireProtect 2 Jeweller Bedienungsanleitung

AJAX

AJAX FireProtect 2 (CO) Jeweller Bedienungsanleitung

AJAX

AJAX MotionProtect Bedienungsanleitung

AJAX

AJAX GlassProtect Bedienungsanleitung

AJAX

AJAX DoorProtect Bedienungsanleitung

AJAX

AJAX FireProtect Bedienungsanleitung

AJAX

AJAX MotionProtect Plus Fibra Bedienungsanleitung

AJAX

AJAX GlassProtect Bedienungsanleitung

AJAX

AJAX FireProtect 2 Jeweller Bedienungsanleitung

AJAX

AJAX DoorProtect Bedienungsanleitung

AJAX

AJAX FireProtect Bedienungsanleitung

AJAX

AJAX MotionProtect Curtain Bedienungsanleitung

AJAX

AJAX FireProtect 2 (Heat) Jeweller Bedienungsanleitung

AJAX

AJAX FireProtect 2 Heat/CO Jeweller Bedienungsanleitung

AJAX

AJAX DoorProtect Plus Bedienungsanleitung

Beliebte Sicherheitssensor Handbücher anderer Marken

THORLABS

THORLABS PDA10JT Bedienungsanleitung

Waeco

Waeco UV-DETECT Bedienungsanleitung

Intermatic

Intermatic IOS-DSIMF Bedienungsanleitung

urmet domus

urmet domus 1083 Bedienungsanleitung

Siemens

Siemens AZL66 Series Bedienungsanleitung

BTI

BTI Profiline Multi Finder Bedienungsanleitung

Challenger

Challenger SL01 Bedienungsanleitung

DMP Electronics

DMP Electronics 1122INT Bedienungsanleitung

Rielta

Rielta Ladoga MK-RK Bedienungsanleitung

Mirion Technologies

Mirion Technologies ACCURAD PRD Bedienungsanleitung

Bosch

Bosch DS835 Bedienungsanleitung

DBI SALA

DBI SALA EZ Stop Bedienerhandbuch

Lamptime

Lamptime ST05C Bedienungsanleitung

Ubiquiti

Ubiquiti MFI-MSC Bedienungsanleitung

Subsite

Subsite 910R Montageanleitung

Satel

Satel OPAL Pro Bedienungsanleitung

Aleph

Aleph XC-1XTEU Bedienungsanleitung

Pima

Pima LARIS QUAD Bedienungsanleitung