Albatron KX18D PRO II Bedienungsanleitung

K8NF4X-AM2

All rights are reserved. No part of this publication may be reproduced, transmitted, transcribed,

stored in a retrieval system or translated into any language or computer language, in any form

or by any means, electronic, mechanical, magnetic, optical, chemical, manual or otherwise,

without the prior written permission of the company. Brands and product names are trademarks

or registered trademarks of their respective companies.

The vendor makes no representations or warranties with respect to the contents herein and

especially disclaim any implied warranties of merchantability or fitness for any purpose. Further

the vendor reserves the right to revise this publication and to make changes to the contents

herein without obligation to notify any party beforehand. Duplication of this publication, in part or

in whole, is not allowed without first obtaining the vendor’s approval in writing.

Trademark

All the trademarks or brands in this document are registered by their respective owner.

Disclaimer

We make no warranty of any kind with regard to the content of this user’s manual. The content

is subject to change without notice and we will not be responsible for any mistakes found in this

user’s manual. All the brand and product names are trademarks of their respective companies.

FCC Compliance Statement

This equipment has been tested and found to comply with the limits of a Class B digital device,

pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable

protection against harmful interference in a residential installation. This equipment generates,

uses and can radiate radio frequency energy and, if not installed and used in accordance with

the instructions, may cause harmful interference to radio communications. Operation of this

equipment in a residential area is likely to cause harmful interference in which case the user will

be required to correct the interference at his own expense. However, there is no guarantee that

interference will not occur in a particular installation.

CE Mark

The device is in accordance with 89/336 ECC-ENC Directive.

Ver: EG100

K8NF4X-AM2

nVIDIA®nForce4 4X

Supports Socket AM2

AMD®AthlonTM 64 FX/ AthlonTM 64 x2 Dual-Core/

AthlonTM 64/ SempronTM Processor

User Manual

Dimensions (Micro-ATX Form-Factor):

z190 mm x 305 mm ( W x L )

Operating System:

zWindows®XP/ 2000

Attention- Im

ortant Information

Follow the procedures below…

Troubleshooting Tips

Refer to other sections in this manual…

Things You Should Know

0The images and pictures in this manual are for reference only and may vary from the

product you received depending on specific hardware models, third party components

and software versions.

0This mainboard contains very delicate IC chips. Always use a grounded wrist strap

when working with the system.

0Do not touch any IC chip, lead, connector or other components.

0Always unplug the AC power when you install or remove any device on the mainboard

or when confuguring pins and switches.

Packing List

K8NF4X-AM2 mainboard

IDE Cable

I/O Bracket

Serial ATA Cable

Mainboard Setup Driver & User Manual CD

Mainboard Quick Installation Guide

Symbols

Table of Contents

CHAPTER 1. GETTING STARTED ..................................................................1

INTRODUCTION....................................................................................................... 1

SPECIFICATION ....................................................................................................... 2

CONFIGURATION .................................................................................................... 5

Layout of K8NF4X-AM2................................................................................ 5

HARDWARE INSTALLATION ................................................................................... 6

CPU Processor Installation.............................................................................. 6

Memory Installation: DIMM1/2 ...................................................................... 7

Back Panel Configuration................................................................................ 9

Connectors..................................................................................................... 10

Front Panel Headers: JW_FP, PWRLED, SPEAK ........................................ 11

Headers & Jumpers........................................................................................ 12

Audio Configuration...................................................................................... 14

Slots ............................................................................................................... 15

Power Supply Attachments............................................................................ 16

CHAPTER 2. BIOS SETUP............................................................................ 17

INTRODUCTION..................................................................................................... 17

KEY FUNCTION..................................................................................................... 17

MAIN MENU ......................................................................................................... 18

CHAPTER 3: SOFTWARE SETUP ............................................................... 20

SOFTWARE LIST ................................................................................................... 20

SOFTWARE INSTALLATION ................................................................................... 20

CHAPTER 4: TROUBLESHOOTING ............................................................ 24

APPENDIX I: SUPER 5.1 CHANNEL AUDIO EFFECT SETUP.................................... 27

APPENDIX II: RAID 0/ 1/ 0+1 SETUP.................................................................... 28

Mainboard K8NF4X-AM2

Chapter 1. Getting Started

Introduction

Congratulations on choosing the K8NF4X-AM2 Mainboard. It is based on the nVIDIA®nForce4

4X chipset. The mainboard supports the AMD AthlonTM 64 FX/ AthlonTM 64 X2 Dual-Core/

AthlonTM 64/ SempronTM Processor with FSB (Front Side Bus) frequencies of 800 MHz/ 1000

MHz (by overclocking).

The K8NF4X-AM2 provides two DIMM (Dual In-Line Memory Modules) sockets and which with

Dual Channel Technology supported. The sockets allow you to install 240-pin, non-ECC &

unbuffered DDR II 800/ 667/ 533/ 400 SDRAM, and support a total memory capacity of 4 GB.

This mainboard provides one PCI-E x16 slot for use with a graphics card, and four PCI slots for

expansion cards which the PCI interface compatible. In addition, one PCI-E x1 slot is provided

by the mainboard for use with an expansion card which the PCI-E x1 interface compatible.

The K8NF4X-AM2 provides one floppy disk drive connector that can be used with 360KB/

720KB/ 1.2MB/ 1.44MB/ 2.88MB drive. It also has two IDE connectors for hard drives

supporting Ultra ATA 133/ 100/ 66/ 33 IDE devices. In addition, the onboard Serial ATA comes

with four SATA connectors, which the interface can provide up to 1.5 Gb/s transmit rates and

also support RAID 0/ 1/ 0+1 mode (See Appendix II).

The onboard AC’ 97 Audio CODEC (ALC655) supports high quality performance 6-channel

audio play (Super 5.1 Channel Audio Effect) <See Appendix I>. The mainboard also supports

the Sony/Philips Digital Interfaces (SPDIF) output/input function (Optional).

The K8NF4X-AM2 also comes with an onboard 10/100 Mbps Ethernet LAN chip. There is a

LAN port on the back panel of your case that you can directly plug into an internet cable.

In addition, there are maximal eight USB2.0/ 1.1 ports which can be set up on this mainboard.

All the information (including hardware installation and software installation) in this manual are

for reference only. The contents in this manual may be updated without notice. The company

will not assume any responsibility for any errors or mistakes within.

Mainboard K8NF4X-AM2

Specification

CPU:

zSupports Socket AM2

zSupports AMD AthlonTM 64 FX/ AthlonTM 64 x2 Dual-Core/ AthlonTM 64/ SempronTM

Processor

zSupports Hyper-TransportTM Link Technology

zSupports 800MHz/ 1000 MHz (by overclocking) FSB (Front Side Bus) Frequencies

Chipset:

zChipset – nVIDIA®nForce4 4X

zI/O Controller – Fintek®F71872FG

zAC’ 97 Aduio Codec – Realtek®ALC655

zLAN PHY – Realtek®RTL8201CL 10/100 LAN PHY

Memory:

zTwo DIMM sockets with Dual Channel Technology supported

zSupports a total memory capacity of 4GB

zSupports to use the 240-pin, non-ECC & unbuffered DDR II 800/ 667/ 533/ 400

SDRAM

Slots:

zTwo PCI-Express interface slots for graphics cards and expansion cards:

1. PCI-E x16 slot: Supports up to x16 mode with 4 GB/s one-way bandwidth

2. PCI-E x1 slot: Supports up to x16 mode with 250 MB/s one-way bandwidth

zFour PCI slots with 133 MB/s one-way bandwidth per channel for expansion cards

FDD Connector:

zOne floppy disk drive connector supporting up to two FDD

zSupports 360KB/ 720KB/ 1.2MB/ 1.44MB/ 2.88MB

Onboard IDE Connector:

zTwo IDE connectors that support up to four IDE devices

zSupports Ultra ATA 133/ 100/ 66/ 33

Mainboard K8NF4X-AM2

zSupports high capacity hard disk drives

Serial ATA Connector:

zFour SATA connectors that support up to four SATA HDD

zSupports SATA 1.0 specification which provides 1.5 Gb/s transmit rate

zSupports RAID 0/ 1/ 0+1 mode

I/O facility Connectors:

zOne multi-mode Parallel Port is capable to support as the following:

1. Standard & Bi-direction Parallel Port

2. Enhanced Parallel Port (EPP)

3. Extended Capabilities Port (ECP)

zOne PS/2 mouse port and one PS/2 keyboard port

zOne COM1 connector

Universal Serial Bus:

zFour onboard USB 2.0/ 1.1 ports

zTwo front USB header comes with this mainboard supporting four additional USB

ports to be set

zSupports a maximum of eight USB 2.0/ 1.1 ports for compliant devices

Onboard AC’ 97 Sound CODEC:

zHigh performance CODEC with high S/N ratio (>90 db)

zCompliant with AC’ 97 2.3 specification

zSupport 6-channel playback capability (Super 5.1 Channel Audio Effect)

zSupport 3D stereo enhancement

zSupport Sony/ Philips Digital Interfaces (S/PDIF) functionality (optional)

Onboard LAN Chip:

zSupports 10/100 Mbps Ethernet LAN

BIOS:

zPhoenix-Award™ BIOS

Mainboard K8NF4X-AM2

zSupports APM 1.2

zSupports ACPI 2.0 power management

Green Function:

zSupports Phoenix-Award™ BIOS power management function

zSupports system-wake-from-power-saving-mode by keyboard or mouse touching

Shadow RAM:

zIntegrated memory controller provides shadow RAM functionality and supports ROM

BIOS

Flash Memory:

zSupports flash memory functionality

zSupports ESCD functionality

Hardware Monitor Function:

zMonitors CPU & System Fan Speed

zMonitors CPU & System Temperature

zMonitors CPU & Memory Voltage

Mainboard K8NF4X-AM2

Configuration

Layout of K8NF4X-AM2

Mainboard K8NF4X-AM2

Hardware Installation

This section will assist you in quickly installing your system hardware. Wear a wrist ground strap

before handling components. Electrostatic discharge may damage your system components.

CPU Processor Installation

This mainboard supports AMD AthlonTM 64 FX/ AthlonTM 64 x2 Dual-Core/ AthlonTM 64/

SempronTM processor and uses a Socket AM2. Before building your system, we suggest you

visit the AMD website and review the processor installation procedures. http://www.amd.com

CPU Socket AM2 Configuration Steps:

1. Locate the CPU socket on your mainboard and nudge the locking lever away from the socket.

Then lift the lever to a 90-degree angle.

2. On the socket, locate the corner which has the “diagonally cut-corner” on the rectangular

shaped pattern of pinholes (see diagram below-left). Match that corner with the “gold triangle”

on the CPU (see diagram below-right) and lower the CPU onto the socket. The bottom of the

CPU should be flush with the face of the socket.

3. Lower the lever until it snaps back into position. This will lock down the CPU.

4. Smear thermal grease on top of the CPU. Lower the CPU fan onto the CPU and use the

clasps on the fan to attach it to the socket. Finally, extend the power cable from the fan and

insert it onto the “CPUFAN” adapter.

ttention

DO NOT touch the CPU pins in case they are damaged. Also, make sure

that you have completed all installation steps before powered on the

system. Finally, double-check that the cooling fan is properly installed and

the CPU fan power cord is securely attached, in case your CPU and other

sensitive components are damaged because of high temperatures.

Andere Handbücher für KX18D PRO II

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Albatron Hauptplatine Handbücher

Albatron

Albatron ABOX 865G SERIES Bedienungsanleitung

Albatron

Albatron KX18D PRO II Bedienungsanleitung

Albatron

Albatron PXP965 (V2.0) Bedienungsanleitung

Albatron

Albatron PM915-478 Bedienungsanleitung

Albatron

Albatron KX400-8XV Pro Bedienungsanleitung

Albatron

Albatron KM51PV-754 Bedienungsanleitung

Albatron

Albatron PI852 Bedienungsanleitung

Albatron

Albatron KM333 Series Bedienungsanleitung

Albatron

Albatron PX865PE Series Bedienungsanleitung

Albatron

Albatron K8NF4X-754 Bedienungsanleitung

Albatron

Albatron PX865PEC PRO Bedienungsanleitung

Albatron

Albatron PX915-SLI Bedienungsanleitung

Albatron

Albatron PX845PE Series Bedienungsanleitung

Albatron

Albatron PM945GC Bedienungsanleitung

Albatron

Albatron PX865PE PRO II Bedienungsanleitung

Albatron

Albatron K8NF4 Series Bedienungsanleitung

Albatron

Albatron KI690-AM2 Bedienungsanleitung

Albatron

Albatron KX400+ Pro-C Bedienungsanleitung

Albatron

Albatron PM945GC Bedienungsanleitung

Albatron

Albatron PM266A PRO Bedienungsanleitung

Albatron

Albatron KM400T-8X Series Bedienungsanleitung

Albatron

Albatron PX915P4 Series Bedienungsanleitung

Albatron

Albatron PXP43 Bedienungsanleitung

Albatron

Albatron KM18G PRO Bedienungsanleitung

Beliebte Hauptplatine Handbücher anderer Marken

DFI

DFI SD170 Bedienungsanleitung

ASROCK

ASROCK ROMED8-2T Bedienungsanleitung

Asus

Asus P2L97A Bedienungsanleitung

Winmate

Winmate IC70 Bedienungsanleitung

Asus

Asus MES-B Bedienungsanleitung

Grantech

Grantech SYS8F377VGGA-3OMN Bedienungsanleitung

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Bedienungsanleitung

Texas Instruments

Texas Instruments ADS8372EVM Bedienungsanleitung

Commell

Commell MS-C73 Bedienungsanleitung

Gigabyte

Gigabyte GA-9IVDT Bedienungsanleitung

IBT Technologies

IBT Technologies MB860 Bedienungsanleitung

Nvidia

Nvidia TEGRA DG-04927-001_V01 Bedienungsanleitung

Intel

Intel D33217CK Bedienungsanleitung

Asus

Asus F1A55-M LX PLUS R2.0 Bedienungsanleitung

EPC

EPC EPC9147C Bedienungsanleitung

Asus

Asus EX-B760M-V5 D4 Bedienungsanleitung

EPOX

EPOX MU-8KHA0010 Bedienungsanleitung

Ski-Doo

Ski-Doo Bombardier MPEM 219 700 090 Bedienungsanleitung