Albatron PXP965 (V2.0) Bedienungsanleitung

PXP965 (V2.0)

All rights are reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a

retrieval system or translated into any language or computer language, in any form or by any means,

electronic, mechanical, magnetic, optical, chemical, manual or otherwise, without the prior written

permission of the company. Brands and product names are trademarks or registered trademarks of their

respective companies.

The vendor makes no representations or warranties with respect to the contents herein and especially

disclaim any implied warranties of merchantability or fitness for any purpose. Further the vendor reserves

the right to revise this publication and to make changes to the contents herein without obligation to notify

any party beforehand. Duplication of this publication, in part or in whole, is not allowed without first

obtaining the vendor’s approval in writing.

Trademark

All the trademarks or brands in this document are registered by their respective owner.

Disclaimer

We make no warranty of any kind with regard to the content of this user’s manual. The content is subject

to change without notice and we will not be responsible for any mistakes found in this user’s manual. All

the brand and product names are trademarks of their respective companies.

FCC Compliance Statement

This equipment has been tested and found to comply with the limits of a Class B digital device, pursuant to

Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful

interference in a residential installation. This equipment generates, uses and can radiate radio frequency

energy and, if not installed and used in accordance with the instructions, may cause harmful interference

to radio communications. Operation of this equipment in a residential area is likely to cause harmful

interference in which case the user will be required to correct the interference at his own expense.

However, there is no guarantee that interference will not occur in a particular installation.

CE Mark

The device is in accordance with 89/336 ECC-ENC Directive.

er: EG10

Mainboard PXP965 (V2.0)

PXP965 (V2.0)

Intel®P965 & ICH8

Support Socket 775 Intel®CoreTM 2 Extreme/ CoreTM 2 Duo/

Pentium®Extreme Edition/ Pentium®4 Extreme Edition/

Pentium®D/ Pentium®4/Celeron®D Processor

User Manual

Enabling the Hyper-Threading Technology, your computer system is

required to have components as the following:

CPU: An Intel®Pentium®4 Processor with HT Technology

Chipset: An Intel®Chipset that supports HT Technology

BIOS: A BIOS that supports HT Technology must be enabled

OS: An operating system that supports HT Technology

For more information on Hyper-Threading Technology, go to:

http://www.intel.com/info/hyperthreading

Dimensions (ATX form-factor):

245mm x 305mm ( W x L )

Operating System:

Windows®2000/ XP

Mainboard PXP965 (V2.0)

Attention- Im

ortant Information

Follow the procedures below…

Troubleshooting Tips

Refer to other sections in this manual…

Things You Have To Know

The images and pictures in this manual are for reference only and may vary from the

product you received depending on specific hardware models, third party

components and software versions.

This mainboard contains very delicate IC chips. Always use a grounded wrist strap

when working with the system.

Do not touch any IC chip, lead, connector or other components.

Always unplug the AC power when you install or remove any device on the mainboard

or when confuguring pins and switches.

Packing List

PXP965 (V2.0) Mainboard

IDE Cable

SATA Cable

I/O Bracket

Setup Driver CD

Mainboard User Manual CD

Mainboard Quick Installation Guide

Symbols

Mainboard PXP965 (V2.0)

Table of Contents

CHAPTER 1. GETTING STARTED ..................................................................1

INTRODUCTION....................................................................................................... 1

SPECIFICATION ....................................................................................................... 2

CONFIGURATION .................................................................................................... 5

Layout of PXP965 (V2.0)................................................................................ 5

HARDWARE INSTALLATION ................................................................................... 6

CPU Processor Installation.............................................................................. 6

Memory Installation: DIMM1/2/3/4................................................................ 7

Back Panel Configuration................................................................................ 9

Connectors..................................................................................................... 11

Front Panel Headers: JW_FP, PWRLED, SPEAK ........................................ 12

EZ Control Button ......................................................................................... 14

Headers & Jumpers........................................................................................ 14

Audio Configuration...................................................................................... 16

Slots ............................................................................................................... 17

Power Supply Attachments............................................................................ 18

CHAPTER 2. BIOS SETUP............................................................................ 19

INTRODUCTION..................................................................................................... 19

MAIN MENU ......................................................................................................... 20

CHAPTER 3: SOFTWARE SETUP ............................................................... 22

SOFTWARE LIST ................................................................................................... 22

SOFTWARE INSTALLATION ................................................................................... 22

CHAPTER 4: TROUBLESHOOTING ............................................................ 25

APPENDIX I: 8/6/4/2 CHANNEL AUDIO EFFECT SETUP......................................... 28

APPENDIX II: SATA 0/1 SPECIFICATION .............................................................. 29

APPENDIX III: IDE CD-ROM/ DVD-ROM SETUP............................................... 30

Mainboard PXP965 (V2.0)

Chapter 1. Getting Started

Introduction

Thanks for choosing PXP965 (V2.0) Mainboard. It is based on Intel®P965 Northbridge chipset

and Intel®ICH8 Southbridge chipset. It supports Intel®CoreTM 2 Extreme/ CoreTM 2 Duo/

Pentium®Extreme Edition/ Pentium®4 Extreme Edition/ Pentium®D/ Pentium®4/ Celeron®D

Processor with FSB (Front Side Bus) frequencies of 1066 MHz/ 800 MHz/ 533 MHz.

The PXP965 (V2.0) provides four DIMM (Dual In-Line Memory Modules) sockets which

allowing you to install 240-pin, unbuffered non-ECC, DDRII 800/ 667/ 533 SDRAMs. It also

supports Dual Channel Technology and allows you installing a total memory capacity of 8 GB.

This mainboard provides one PCI-E x16 interface slot up to x16 mode, one Universal PCI-E

interface slot up to x4 mode, and two PCI-E x1 interface slots up to x1 mode can be supported

individually. It is recommended that you can insert a graphics card onto the PCI-E x16 slot,

and an expansion card which the interface is capable for PCI-E x1 and Universal PCI-E

specification. In addition, two PCI slots come with this mainboard and are capable for use with

expansion cards.

The PXP965 (V2.0) provides one floppy disk drive connector that can be used with

360KB/720KB/ 1.2MB/1.44MB/2.88MB drives. This mainboard comes with Serial ATA II

support with four SATA II connectors which provide up to 3 Gbps data transfer rates.

Furthermore, the JMicron®JMB363 chip supports one IDE connector and two additional SATA

II ports. The IDE connector is compatible with IDE hard drives supporting Ultra ATA

66/100/133, and these two SATA II ports support RAID 0/ 1 mode <See Appendix II>.

The onboard High Definition Audio CODEC (ALC883) supports high quality performance

8-channel audio play (Super 7.1 Channel Audio Effect) <See Appendix I>. The mainboard

also supports the Sony/Philips Digital Interfaces (S/PDIF) input/ output function.

The PXP965 (V2.0) also comes with an onboard 10/100/1000 Mbps Ethernet LAN chip. There

is a LAN port on the back panel of your case that you can directly plug into an Internet cable.

There are maximal ten USB2.0/ 1.1 ports which can be set up on this mainboard.

All the information (including hardware installation and software installation) in this manual are

for reference only. The contents in this manual may be updated without notice. The company

will not assume any responsibility for any errors or mistakes within.

Mainboard PXP965 (V2.0)

Specification

CPU:

Support Socket 775

Support Intel®CoreTM 2 Extreme/ CoreTM 2 Duo/ Pentium®Extreme Edition/ Pentium®

4 Extreme Edition/ Pentium®D/ Pentium®4/ Celeron®D Processor

Support Hyper-Threading Technology

Support 1066 MHz/ 800 MHz/ 533 MHz FSB (Front Side Bus) Frequencies

Chipset:

Northbridge Chipset – Intel®P965

Southbridge Chipset – Intel®ICH8

I/O Controller – Fintek®F71882FG

High Definition Audio Codec – Realtek®ALC883

GB LAN Controller – Realtek®RTL 8110SC

IDE Controller – JMicron®JMB363

Memory:

Four DIMM sockets

Supports unbuffered & non-ECC DDRII 800/ 667/ 533 SDRAM

Supports a total memory capacity of up to 8 GB

Supports Dual Channel data bus

Onboard HD Audio Codec (ALC 883):

High performance Codec with high S/N ratio (>90 db)

Compatible with Azalia 1.0 specification

Supports 8/6/4/2 channel playback capability

Supports jack sensing and re-tasking function

Built-in Dolby Digital Live Technology

Supports Sony/ Philips Digital Interfaces (S/PDIF) functionality

Slots:

Four PCI-Express interface slots for graphics cards and expansion cards

Mainboard PXP965 (V2.0)

1. One PCI-E x16 slot: Supports up to x16 mode

2. One Universal PCI-E slot: Supports up to x4 mode

3. Two PCI-E x1 slot: Supports up to x1 mode

Two PCI interface slots for expansion cards

FDD Connector:

Supports one FDD connector to set up to two floppy disk drives

Supports 360KB/ 720KB/ 1.2MB/ 1.44MB/ 2.88MB

IDE Connector:

One IDE connector

Supports up to two IDE devices

Supports Ultra ATA 66/100/133

Supports high capacity hard disk drives

Serial ATA II Connector:

Six SATA II connectors

Supports SATA 2.0 specification with data transfer rate up to 3 Gbps

One SATA II connector can only support one SATA II HDD

Supports RAID 0/ 1 mode（only SATA5/SATA6 ports）

Onboard LAN Chip:

Supports 10/100/1000 Mbps Ethernet LAN

I/O facility Connectors

Supports one PS/2 mouse port and one PS/2 keyboard port

One multi-mode Parallel Port is capable to support as the following:

1. Standard & Bi-direction Parallel Port

2. Enhanced Parallel Port (EPP)

3. Extended Capabilities Port (ECP)

Supports one serial port（COM1）on back panel

Supports one SPDIF IN port and one SPDIF OUT port on back panel

Supports one serial port（COM1）header and one IrDA（IR）header with external

Mainboard PXP965 (V2.0)

devices connected

Universal Serial Bus:

Four onboard USB 2.0/ 1.1 ports

Three front USB headers come with this mainboard for additional six USB ports

Support a maximum of ten USB ports to connect USB compliant devices

BIOS:

Phoenix-Award™ BIOS

Support APM 1.2

Support ACPI 2.0 power management

Green Function:

Supports Phoenix-Award™ BIOS power management function

Supports system-wake-from-power-saving-mode by keyboard or mouse touching

Shadow RAM:

Integrated memory controller provides shadow RAM functionality and supports ROM

BIOS

Flash Memory:

Supports flash memory functionality

Supports ESCD functionality

Hardware Monitor Function:

Monitors CPU/ Chassis Fan Speed

Monitors CPU and system temperature

Monitors system voltages

Mainboard PXP965 (V2.0)

Configuration

Layout of PXP965 (V2.0)

Mainboard PXP965 (V2.0)

Hardware Installation

This section will assist you in quickly installing your system hardware. Wear a wrist ground strap before

handling components. Electrostatic discharge may damage the system’s components.

CPU Processor Installation

This mainboard supports Intel®CoreTM 2 Extreme/ CoreTM 2 Duo/ Pentium®Extreme Edition/ Pentium®4

Extreme Edition/ Pentium®D/ Pentium®4/ Celeron®D Processor using a Socket 775. Before building your

system, we suggest you to visit the Intel website and review the processor installation procedures.

http://www.intel.com

CPU Socket 775 Configuration Steps:

1. Locate the CPU socket 775 on your

mainboard and nudge the lever away

from the socket as shown. Then lift the

lever to a 140-degree angle (A). Next, lift

up the iron cover (B).

2. There are 2 distinctive marks located

near the corners of the socket on the

same side as the lever as shown (C).

Match these marks with the marks on the

CPU and carefully lower the CPU down

onto the socket (D).

3. Replace the iron cover and then lower

the lever until it snaps back into position

(E). This will lock down the CPU (F).

4. Smear thermal grease on the top of the CPU. Lower the CPU fan

onto the CPU/CPU socket and secure it using the attachments or

screws provided on the fan. Finally, attach the fan power cord to

the CPUFAN header.

Attention

DO NOT touch the CPU pins in case they are damaged. Also, make sure

that you have completed all installation steps before powered on the

system. Finally, double-check that the cooling fan is properly installed

and the CPU fan power cord is securely attached, in case your CPU and

other sensitive components are damaged because of high temperatures.

Andere Handbücher für PXP965 (V2.0)

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Albatron Hauptplatine Handbücher

Albatron

Albatron KM7025 Bedienungsanleitung

Albatron

Albatron KM400T-8X Pro Bedienungsanleitung

Albatron

Albatron PM73V Bedienungsanleitung

Albatron

Albatron PX915P-2V Bedienungsanleitung

Albatron

Albatron KM18G PRO Bedienungsanleitung

Albatron

Albatron PX915PC PRO-G Bedienungsanleitung

Albatron

Albatron PX865PEC PRO(2.0) Bedienungsanleitung

Albatron

Albatron PM915-478 Bedienungsanleitung

Albatron

Albatron PX848 Like Series Bedienungsanleitung

Albatron

Albatron KX600 PRO Bedienungsanleitung

Albatron

Albatron KX18D PRO II Bedienungsanleitung

Albatron

Albatron PXP965 (V2.0) Bedienungsanleitung

Albatron

Albatron PM 845G Series Bedienungsanleitung

Albatron

Albatron PM845GV1 Bedienungsanleitung

Albatron

Albatron KM266 Series Bedienungsanleitung

Albatron

Albatron K8SLI-AM2 Bedienungsanleitung

Albatron

Albatron PX915P4 Series Bedienungsanleitung

Albatron

Albatron PX845PE Series Bedienungsanleitung

Albatron

Albatron KM400A series Bedienungsanleitung

Albatron

Albatron PI960GLE Bedienungsanleitung

Albatron

Albatron KX600A Series Bedienungsanleitung

Albatron

Albatron PM266A PRO Bedienungsanleitung

Albatron

Albatron PX865PE PRO II Bedienungsanleitung

Albatron

Albatron PX848PV Series Bedienungsanleitung

Beliebte Hauptplatine Handbücher anderer Marken

DFI

DFI SD170 Bedienungsanleitung

ASROCK

ASROCK ROMED8-2T Bedienungsanleitung

Asus

Asus P2L97A Bedienungsanleitung

Winmate

Winmate IC70 Bedienungsanleitung

Asus

Asus MES-B Bedienungsanleitung

Grantech

Grantech SYS8F377VGGA-3OMN Bedienungsanleitung

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Bedienungsanleitung

Texas Instruments

Texas Instruments ADS8372EVM Bedienungsanleitung

Commell

Commell MS-C73 Bedienungsanleitung

Gigabyte

Gigabyte GA-9IVDT Bedienungsanleitung

IBT Technologies

IBT Technologies MB860 Bedienungsanleitung

Nvidia

Nvidia TEGRA DG-04927-001_V01 Bedienungsanleitung

Intel

Intel D33217CK Bedienungsanleitung

Asus

Asus F1A55-M LX PLUS R2.0 Bedienungsanleitung

EPC

EPC EPC9147C Bedienungsanleitung

Asus

Asus EX-B760M-V5 D4 Bedienungsanleitung

EPOX

EPOX MU-8KHA0010 Bedienungsanleitung

Ski-Doo

Ski-Doo Bombardier MPEM 219 700 090 Bedienungsanleitung