Albatron PX845PEV-800 Gebrauchsanweisung

Albatron PX845PEV-800

Intel® 82845PE & 82801DB

Supports Socket 478 Intel®Pentium®4 Processor

Enabling the functionality of Hyper-Threading Technology for your

computer system requires ALL of the following platform

zCPU: An Intel®Pentium® 4 Processor with HT Technology

zChipset: An Intel® Chipset that supports HT Technology

zBIOS: A BIOS that supports HT Technology and has it enabled

zOS: An operating system that supports HT Technology

For more information on Hyper-Threading Technology, go to:

http://www.intel.com/info/hyperthreading

120410032M1A

Albatron PX845PEV-800

reproduced, transmitted, transcribed, stored in a retrieval system or translated into any

language or computer language, in any form or by any means, electronic, mechanical,

magnetic, optical, chemical, manual or otherwise, without the prior written permission of the

company. Brands and product names are trademarks or registered trademarks of their

respective companies.

The vendor makes no representations or warranties with respect to the contents herein and

especially disclaim any implied warranties of merchantability or fitness for any purpose.

Further the vendor reserves the right to revise this publication and to make changes to the

contents herein without obligation to notify any party beforehand. Duplication of this

publication, in part or in whole, is not allowed without first obtaining the vendor’s approval in

writing.

Disclaimer

Albatron make no warranty of any kind with regard to the content of this user’s manual. The

content is subject to change without notice and we will not be responsible for any mistakes

found in this user’s manual. All the brand and product names are trademarks of their respective

companies.

FCC Compliance Statement

This equipment has been tested and found to comply with the limits of a Class B digital device,

pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable

protection against harmful interference in a residential installation. This equipment generates,

uses and can radiate radio frequency energy and, if not installed and used in accordance with

the instructions, may cause harmful interference to radio communications. Operation of this

equipment in a residential area is likely to cause harmful interference in which case the user

will be required to correct the interference at his own expense. However, there is no guarantee

that interference will not occur in a particular installation.

Contents

CHAPTER 1. GETTING STARTED .................................................................................... 1

INTRODUCTION....................................................................................................................... 1

SPECIFICATIONS ..................................................................................................................... 2

QUICK CONTENT TABLE......................................................................................................... 5

CONFIGURATION .................................................................................................................... 6

HARDWARE INSTALLATION .................................................................................................... 7

CHAPTER 2. BIOS SETUP ................................................................................................. 22

INTRODUCTION..................................................................................................................... 22

MAIN MENU ......................................................................................................................... 24

ADVANCED BIOS FEATURES ............................................................................................... 26

INTEGRATED PERIPHERALS .................................................................................................. 31

POWER MANAGEMENT ......................................................................................................... 34

HARDWARE MONITOR.......................................................................................................... 37

LOAD DEFAULTS .................................................................................................................. 38

EXIT MENU .......................................................................................................................... 39

CHAPTER 3: SOFTWARE SETUP.................................................................................... 40

SOFTWARE LIST ................................................................................................................... 40

SOFTWARE INSTALLATION ................................................................................................... 40

CHAPTER 4: TROUBLESHOOTING ............................................................................... 41

APPENDIX I：...................................................................................................................... 44

APPENDIX II：.................................................................................................................... 45

APPENDIX III：................................................................................................................... 46

Albatron Anniversary Special Edition PX845PEV-800

Chapter 1. Getting Started

Introduction

Congratulations on choosing the Albatron Anniversary Special Edition PX845PEV-800

mainboard! Albatron PX845PEV-800 is based on either the Intel®82845PE Northbridge

chipsets and 82801DB Southbridge chipset. It supports Intel®Pentium®4 Socket 478

Processors with a FSB (Front Side Bus) frequency of 800/ 533/ 400MHz.

Albatron PX845PEV-800 provides 3 DIMM sockets using 184-pin DDR SDRAM with a total

capacity of up to 2 GB. You can install DDR 400/ 333/ 266 (PC3200/ 2700/ 2100) SDRAM.

Albatron PX845PEV-800 provides one AGP Slot for 4X (1.5V only) AGP cards. Albatron

PX845PEV-800 also comes with AGP protection which ensures that you only install 1.5V

AGP cards. Five 32 bits PCI Slots stand for Peripheral Component Interconnect.

Albatron PX845PEV-800 includes two built in IDE facilities that support Ultra DMA 33/ 66/

100 BMIDE and PIO Modes, one FDC facilities that support 360K, 720K, 1.2M, 1.44M and

2.88M.

Albatron PX845PEV-800 provides three FAN power headers; they are available for cooling

fans. They are CPU FAN, Auxiliary FAN, and Chassis FAN, they are used for decrease the

devices temperature of the system.

Albatron PX845PEV-800 provides one standard PS/2 mouse connector, one PS/2 Keyboard

connector, two Serial ports (RS-232), and one Parallel port (DB-25).

Albatron PX845PEV-800 also comes with six USB 2.0 ports (two onboard, four by USB

bracket) for USB devices, and a LAN Chip which supports a back panel LAN port (RJ-45).

Albatron PX845PEV-800 contains a “Watch Dog Timer” feature, it is used to detect when the

system is unable to handle over-clocking configurations during POST stage.

Albatron Anniversary Special Edition PX845PEV-800

Specifications

CPU:

zSupports Socket 478 Pentium®4 processor

zSupports Hyper-Threading Technology

Speed:

z800/ 533/ 400MHz Front Side Bus frequency

(FSB 800 is by overclocking or using a 200 MHz Clock Frequency CPU)

z33 MHz, 32 bit PCI interface (PCI 2.2 compliant)

z66 MHz AGP 2.0 compliant interface, supports 4X transfer modes (1.5V only)

Chipset:

zNorthbridge Chip– Intel 82845PE

zSouthbridge Chip– Intel 82801DB

zI/O Controller – Winbond IO W83627HF

zLAN Chip – 3Com 910

DRAM Memory:

zSupports DDR (Double Data Rate) SDRAM

DDR 400 (PC3200) / 333 (PC2700) / 266 (PC2100)

zSupports 64 MB /128 MB /256 MB /512 MB /1 GB

unbuffered non-ECC DIMM modules

zSupports up to three single-sided or two double-sided memory modules with a

total capacity of 2 GB (see memory installation section for more details)

zDoes not support double-sided *16 DDR DIMMs

Green Functionality:

zSupports Phoenix-Award BIOS™ power management functionality

zWakes from power saving sleep mode with any keyboard or mouse activity

Shadow RAM:

zThis mainboard is equipped with a memory controller providing shadow RAM

and support for ROM BIOS

Albatron Anniversary Special Edition PX845PEV-800

BUS Slots:

zOne AGP slot (4X/ 1.5V only)

zFive 32-bit PCI bus slots

Flash Memory:

zSupports flash memory functionality

zSupports ESCD functionality

Hardware Monitor Function:

zMonitors CPU Fan Speed

zMonitors Chasis Fan Speed

zMonitors System Voltage

zMonitors Auxiliary Fan Speed

Infrared:

zSupports IrDA Version 1.0 SIR Protocol with a maximum baud rate of up to 115.2

Kbps

zSupports SHARP ASK-IR Protocol with maximum baud rate of up to 57600 bps

zSupports Consumer IR with Wake-Up function

IDE Facilities:

zSupports Ultra ATA 33, Ultra ATA 66, Ultra ATA 100, BMIDE and PIO modes

zSupports IDE interface with CD-ROM

zSupports high capacity hard disk drives

zSupports installation of up to 4 drives, with separate IDE connections for Primary

and Secondary connectors

Universal Serial Bus:

zSupports six USB 2.0 ports for USB interface devices

LAN:

zProvides Auto-negotiation (NWAY) function of full/half duplex operation for

both 10 Mbps and 100 Mbps

zSupports PC99 wake on LAN

z10/100 Mbps Ethernet support

Albatron Anniversary Special Edition PX845PEV-800

AGP protection:

zThis mainboard provides an AGP slot only for 1.5V AGP cards. The AGP

protection function is to protect the mainboard and AGP cards if a non 1.5V card

is installed.

I/O facilities:

zOne multi-mode Parallel Port capable of supporting the following specifications:

1. Standard & Bi-direction Parallel Port

2. Enhanced Parallel Port (EPP)

3. Extended Capabilities Port (ECP)

zSupports two serial ports, 16550 UART

zSupports Infrared Data Transmission using IrDA

zSupports PS/2 mouse and PS/2 keyboard

zSupports 360 KB, 720 KB, 1.2 MB, 1.44 MB, and 2.88 MB floppy disk drives

BIOS:

zPhoenix-Award™ BIOS

zSupports APM 1.1 & 1.2

zSupports USB Legacy function

zSupports ACPI power management

Watch Dog Timer:

zThis mainboard contains a special feature called the “Watch Dog Timer” which is

used to detect when the system is unable to handle over-clocking configurations

during POST stage. Once detected the system will reset the configurations and

reboot the system after five seconds.

Dimensions (ATX form-factor):

z214mm x 293mm (WxL)

Package Contents:

zIDE Cable

zFDC Cable

zUSB Bracket (2 Ports or 4 Ports)

zSound Card

zInstallation and Setup Driver CD

zMulti-language User Manual

Albatron Anniversary Special Edition PX845PEV-800

Quick Content Table

Function Content Location Page

CPU Socket 478 U6 8

DDR DIMM Sockets DDR DIMM 1,2,3 11

ATX Power Connectors ATX_ PWR, ATX_12V 21

IDE Connectors IDE1/IDE2 17

FDC Connector FDC 17

AGP Slot AGP 20

PCI Slots PCI 1, 2, 3, 4, 5 20

CPU FAN,Chassis FAN,

Auxiliary FAN CPUFAN, CHASFAN, AUXFAN 9

Front Panel Indicator SW/LED 15

Speaker Connector SPEAKER 16

Infrared Connector IrDA 16

Front USB Headers USB2, USB3 18

Clear CMOS Jumper JP1 19

Case Open Warning Function CASE OPEN 18

PC99 Color Back Panel Back Panel Connector 13

Albatron Anniversary Special Edition PX845PEV-800

Configuration

Layout of PX845PEV-800

Socket 478

Intel

82801DB

U17

BAT1

JP1

CASE OPEN

SPEAKER

SW/LED

USB2 USB3

CHASFAN

Phoenix

Bios

KB/MS

USB/LAN

PRT/COM

IrDA

CPUFAN

PCI3

PCI5

LAN

CHIP

PCI4

Intel

82845PE

U10

AGP

AUXFAN

PCI1

PCI2

DIMM1

ATX _PWR

DIMM2

DIMM3

FDC

IDE1IDE2

Winbond

W83627HF

ATX_12V

Albatron Anniversary Special Edition PX845PEV-800

Hardware Installation

This section will assist you in quickly installing your system hardware. Wear a wrist ground

strap before handling components. Electrostatic discharge may damage your system

components.

Subject:

CPU Processor Installation

Memory Installation

Back Panel Configuration

Connector Configuration

Header Configuration

Jumper Settings

Power Supply Attachments

Inhaltsverzeichnis

Andere Albatron Hauptplatine Handbücher

Albatron

Albatron KM400A series Bedienungsanleitung

Albatron

Albatron K8Ultra-U Series Bedienungsanleitung

Albatron

Albatron K8X890 Series Bedienungsanleitung

Albatron

Albatron PX848PV Series Bedienungsanleitung

Albatron

Albatron PX848 Like Series Bedienungsanleitung

Albatron

Albatron KM61S-AM2 Bedienungsanleitung

Albatron

Albatron PM945GC Bedienungsanleitung

Albatron

Albatron PX865PEL-800 Bedienungsanleitung

Albatron

Albatron PM800 Series Bedienungsanleitung

Albatron

Albatron PI965GME-M Bedienungsanleitung

Albatron

Albatron PX925XE Series Bedienungsanleitung

Albatron

Albatron KX18D PRO II Bedienungsanleitung

Albatron

Albatron PX845GEV Series Bedienungsanleitung

Albatron

Albatron PX865PEC PRO(2.0) Bedienungsanleitung

Albatron

Albatron PXP35 Bedienungsanleitung

Albatron

Albatron KX18D PRO II Bedienungsanleitung

Albatron

Albatron P4M800 Pro Bedienungsanleitung

Albatron

Albatron kx600s Bedienungsanleitung

Albatron

Albatron PX845PE Series Bedienungsanleitung

Albatron

Albatron PM845GV1 Bedienungsanleitung

Albatron

Albatron KM51PV-754 Bedienungsanleitung

Albatron

Albatron PX865PEC PRO Bedienungsanleitung

Albatron

Albatron PM945GC Bedienungsanleitung

Albatron

Albatron PXP965 (V2.0) Bedienungsanleitung

Beliebte Hauptplatine Handbücher anderer Marken

DFI

DFI SD170 Bedienungsanleitung

ASROCK

ASROCK ROMED8-2T Bedienungsanleitung

Asus

Asus P2L97A Bedienungsanleitung

Winmate

Winmate IC70 Bedienungsanleitung

Asus

Asus MES-B Bedienungsanleitung

Grantech

Grantech SYS8F377VGGA-3OMN Bedienungsanleitung

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Bedienungsanleitung

Texas Instruments

Texas Instruments ADS8372EVM Bedienungsanleitung

Commell

Commell MS-C73 Bedienungsanleitung

Gigabyte

Gigabyte GA-9IVDT Bedienungsanleitung

IBT Technologies

IBT Technologies MB860 Bedienungsanleitung

Nvidia

Nvidia TEGRA DG-04927-001_V01 Bedienungsanleitung

Intel

Intel D33217CK Bedienungsanleitung

Asus

Asus F1A55-M LX PLUS R2.0 Bedienungsanleitung

EPC

EPC EPC9147C Bedienungsanleitung

Asus

Asus EX-B760M-V5 D4 Bedienungsanleitung

EPOX

EPOX MU-8KHA0010 Bedienungsanleitung

Ski-Doo

Ski-Doo Bombardier MPEM 219 700 090 Bedienungsanleitung