Albatron KM400T-8X Pro Bedienungsanleitung

KM400T-8X Series

All rights are reserved. No part of this publication may be reproduced, transmitted, transcribed,

stored in a retrieval system or translated into any language or computer language, in any form or by

any means, electronic, mechanical, magnetic, optical, chemical, manual or otherwise, without the

prior written permission of the company. Brands and product names are trademarks or registered

trademarks of their respective companies.

The vendor makes no representations or warranties with respect to the contents herein and especially

disclaim any implied warranties of merchantability or fitness for any purpose. Further the vendor

reserves the right to revise this publication and to make changes to the contents herein without

obligation to notify any party beforehand. Duplication of this publication, in part or in whole, is not

allowed without first obtaining the vendor’s approval in writing.

Disclaimer

We make no warranty of any kind with regard to the content of this user’s manual. The content is

subject to change without notice and we will not be responsible for any mistakes found in this user’s

manual. All the brand and product names are trademarks of their respective companies.

FCC Compliance Statement

This equipment has been tested and found to comply with the limits of a Class B digital device,

pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection

against harmful interference in a residential installation. This equipment generates, uses and can

radiate radio frequency energy and, if not installed and used in accordance with the instructions, may

cause harmful interference to radio communications. Operation of this equipment in a residential

area is likely to cause harmful interference in which case the user will be required to correct the

interference at his own expense. However, there is no guarantee that interference will not occur in a

particular installation.

120410050M2N

KM400T-8X Series

VIA® VT8377 (KT400) & VT8235

Supports Socket 462 AMD®Athlon XPTM/ AthlonTM /DuronTM /BartonTM Processor

USER Manual

Package Contents:

 IDE Cable

 FDC Cable

 USB Bracket (optional)

 Installation and Setup Driver CD

 KM400T-8X Series User Manual

Dimensions (Micro ATX form-factor):

 200 mm x 243 mm (WxL)

Operating System:

 Supports most popular operating systems: Windows®9X/ME/2000/XP etc.

Contents

CHAPTER 1. GETTING STARTED .................................................................................... 1

INTRODUCTION....................................................................................................................... 1

SPECIFICATION ....................................................................................................................... 2

QUICK CONTENT TABLE......................................................................................................... 5

CONFIGURATION .................................................................................................................... 6

HARDWARE INSTALLATION .................................................................................................... 8

CHAPTER 2. BIOS SETUP ................................................................................................. 20

INTRODUCTION..................................................................................................................... 20

MAIN MENU ......................................................................................................................... 22

ADVANCED BIOS FEATURES ............................................................................................... 24

INTEGRATED PERIPHERALS .................................................................................................. 32

POWER MANAGEMENT ......................................................................................................... 36

HARDWARE MONITOR.......................................................................................................... 41

LOAD DEFAULTS .................................................................................................................. 42

EXIT MENU .......................................................................................................................... 43

CHAPTER 3: SOFTWARE SETUP.................................................................................... 44

SOFTWARE LIST ................................................................................................................... 44

SOFTWARE INSTALLATION ................................................................................................... 44

CHAPTER 4: TROUBLESHOOTING ............................................................................... 46

APPENDIX I: SUPER 5.1 CHANNEL SETUP ............................................................................. 49

APPENDIX II: DIGITAL CD AUDIO SETUP............................................................................. 51

KM400T-8X Series

Chapter 1. Getting Started

Introduction

Congratulations on choosing the KM400T-8X Series mainboard! The KM400T-8X series includes

the KM400T-8X PRO and KM400T-8X. These are based on VT8377 and VT8235 chipsets. It also

supports AMD®Athlon XPTM/ AthlonTM/ DuronTM/ BartonTM Processors with a FSB (Front Side Bus)

frequency of 200/ 266/ 333 MHz.

The KM400T-8X Series provide 2 sockets using 184 pin DDR SDRAM with a total capacity of up to

2GB. You can install DDR333/ 266/ 200 (PC2700/ 2100/ 1600) SDRAM. This mainboard is capable

of DDR400 without overclocking, simply by using DDR400 SDRAM and making the appropriate

adjustments to the BIOS configuration. (For more details please refer the Frequency / Voltage

Control section.)

The KM400T-8X Series provide one AGP Slot for 2X/ 4X/ 8X (1.5V only) AGP cards.

The KM400T-8X Series include built in IDE facilities that support Ultra DMA 33/66/100/133. The

KM400T-8X Series also comes with an Audio Codec (VIA VT1616) which supports high quality 6

channel audio (Super 5.1 Channel Audio Effect).

The KM400T-8X Series also include CPU Over Temperature Protection (OTP). When CPU

temperature rises above normal values, the system will automatically shut down to protect your

system from overheating. But the OTP is only functional when using an Athlon XPTM CPU.

The KM400T-8X Series also comes with six USB 2.0 ports.

The KM400T-8X PRO also comes with a LAN Chip (VIA VT6103) which supports a back panel

LAN port.

The company’s 3 Year Limited Warranty for this product covers both labor costs and replacement

parts during the 1st year. Only labor costs are covered during the 2nd and 3rd years (replacement

parts will be charged during the 2nd and 3rd years).

All of the information in this manual only for reference. This specification is subject to change

without notice.

KM400T-8X Series

Specification

CPU:

 Supports Socket 462 (Socket A)

 Supports AMD®Athlon XPTM, AthlonTM, DuronTM, BartonTM processors

Speed:

 200/ 266/ 333 MHz Front Side Bus frequency

 33 MHz, 32 bit PCI interface (PCI 2.2 compliant)

 66 MHz AGP 2.0 compliant interface that supports 2X/ 4X data transfer modes

 66 MHz AGP 3.0 compliant interface that supports 8X data transfer modes

Chipset:

 Northbridge Chip – VIA VT8377 (KT400)

 Southbridge Chip – VIA VT8235

 I/O Controller – Winbond Super I/O W83697HF

 Audio Codec – VIA VT1616

 LAN Chip – VIA VT6103

DRAM Memory:

 Supports DDR333 (PC2700)/ DDR266 (PC2100)/ DDR200 (PC1600) SDRAM

 Supports 64 MB/ 128 MB/ 256 MB/ 512 MB/ 1 GB unbuffered/ registered non-ECC

DIMM modules

 Supports up to two double-sided memory modules with a total capacity of 2 GB

Green Functionality:

 Supports Phoenix-Award BIOS ™ power management functionality

 Wakes from power saving sleep mode with any keyboard or mouse activity

Shadow RAM:

 This mainboard is equipped with a memory controller providing shadow RAM and

support for ROM BIOS

KM400T-8X Series

BUS Slots:

 Provides one AGP slot (1.5V only)

 Provides three PCI bus slots

Flash Memory:

 Supports flash memory functionality

 Supports ESCD functionality

Hardware Monitor Function:

 Monitors CPU Fan/ Chassis Fan Speed

 Monitors CPU & system Temperature

 Monitors System Voltage

Audio Sound Codec Onboard:

 AC-LINK protocol compliance

 Compliant with AC’97 2.1 specification

 6-channel playback capability (Super 5.1 Channel Audio Effect)

 Supports Sony/ Philips Digital Interface (S/PDIF) for output only

LAN Controller on board: (only for KM400T-8X PRO)

 10/ 100 MHz full and half duplex operation

 Independent 2K byte FIFOs for receive and transmit

 Magic packet and wake-on-address filtering

 Software controllable power down

IDE Facilities:

 Supports Ultra ATA 33, Ultra ATA 66, Ultra ATA 100, Ultra ATA 133

 Supports IDE interface with CD-ROM

 Supports high capacity hard disk drives

 Supports installation of up to 4 drives, with separate IDE connections for Primary and

Secondary connectors

KM400T-8X Series

I/O facilities:

 One multi-mode Parallel Port capable of supporting the following specifications:

1. Standard & Bi-direction Parallel Port

2. Enhanced Parallel Port (EPP)

3. Extended Capabilities Port (ECP)

 Supports two serial ports, 16550 UART

 Supports PS/2 mouse and PS/2 keyboard

 Supports 360 KB, 720 KB, 1.2 MB, 1.44 MB, and 2.88 MB floppy disk drives

 MIDI compatible

 Game port compatible

Universal Serial Bus:

 Supports six USB 1.1/2.0 ports for USB interface devices

BIOS:

 Phoenix-Award™ BIOS

 Supports APM1.2

 Supports USB Legacy function

 Supports ACPI power management

Sophisticated OTP (Over Temperature Protection):

 Special design for CPU Over Temperature Protection.

 OTP is functional when using an Athlon XPTM CPU.

Watch Dog Timer:

 The mainboard contains a special feature called the “Watch Dog Timer” which is used to

detect when the system is unable to handle over-clocking configurations during POST

stage. Once detected the system will reset the configurations and reboot the system after

five seconds. On most systems you would need to remove the cover of your system and

re-jumper the clear CMOS switches on the mainboard when your system encounters

over-clocking problems. With the “Watch Dog Timer”, overclocking settings will be

automatically cleared and reset.

KM400T-8X Series

Quick Content Table

Function Content Location Page

CPU Socket 462 U3 8

DDR DIMM Sockets DIMM 1、2 10

ATX Power Connector ATX_ PWR 19

IDE Connectors IDE1/IDE2 14

FDC Connector FDC 14

AGP Slot AGP 19

PCI Slots PCI 1、2、3 19

CPU FAN、Chassis FAN、

Auxiliary FAN CPUFAN、CHASFAN、AUXFAN 9

Front Panel Indicator SW/LED、PWRLED 13

Speaker Connector SPEAKER 14

Front USB Headers USB2、USB3 15

Over Temperature Protection

Function JP4 15

Clear CMOS Jumper JP1 16

CPU Clock select Jumper JP5、JP6 16

CPU Ratio select * SW1A*、JP9* 17

Case Open Warning Header CASE OPEN 17

Sony/Philips Digital Interface

Connector S/PDIF 18

Front Panel Audio Header FRONT AUDIO 18

PC99 Color Codec Back Panel Back Panel Connector 11

* means optional

KM400T-8X Series

Configuration

Layout of KM400T-8X PRO

T8377

USB2

SPDIF

Winbond

W83697HF

Socket 462

CPUFAN

BAT1

FDC

ATX_PWR

PCI1

PCI2

PCI3

DIMM2

IDE1

IDE2

DIMM1

T8235

USB3

VIA

VT6103

BIOS

U17

CHASFAN

SW/LED

PWRLED

SPEAKER

1129

FRONT

AUDIO

10 10

AUXFAN

Codec

JP1

U13

JP4

JP5

JP9

SW1A

JP6

CASE

OPEN

PRT/COM

KB/MS

USB/LAN

SOUND

KM400T-8X Series

Layout of KM400T-8X

T8377

USB2

Winbond

W83697HF

Socket 462

CPUFAN

BAT1

FDC

ATX_PWR

PCI1

PCI2

PCI3

DIMM2

IDE1

IDE2

DIMM1

T8235

USB3

BIOS

U17

CHASFAN

SW/LED

PWRLED

SPEAKER

1129

10 10

AUXFAN

SPDIF

FRONT

AUDIO

Codec

JP1

U13

JP4

JP5

JP9

SW1A

JP6

CASE

OPEN

PRT/COM

KB/MS

USB

SOUND

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Albatron Hauptplatine Handbücher

Albatron

Albatron K8NF4 Series Bedienungsanleitung

Albatron

Albatron PM945GC Bedienungsanleitung

Albatron

Albatron PX865PEL-800 Bedienungsanleitung

Albatron

Albatron PM915-478 Bedienungsanleitung

Albatron

Albatron K8Ultra-U Series Bedienungsanleitung

Albatron

Albatron PX915P4C Series Bedienungsanleitung

Albatron

Albatron PXP35 Bedienungsanleitung

Albatron

Albatron PX865PE Series Bedienungsanleitung

Albatron

Albatron PX865PE PRO II Bedienungsanleitung

Albatron

Albatron PXP35 Bedienungsanleitung

Albatron

Albatron PM915-478 Bedienungsanleitung

Albatron

Albatron KX18D PRO II Bedienungsanleitung

Albatron

Albatron PX865PEC PRO(2.0) Bedienungsanleitung

Albatron

Albatron KM333 Series Bedienungsanleitung

Albatron

Albatron PXP965 (V2.0) Bedienungsanleitung

Albatron

Albatron K8SLI-AM2 Bedienungsanleitung

Albatron

Albatron KM18G PRO Bedienungsanleitung

Albatron

Albatron KX18DS PRO II Bedienungsanleitung

Albatron

Albatron PI945GSE-270 Bedienungsanleitung

Albatron

Albatron PI965GME Bedienungsanleitung

Albatron

Albatron PM945GZ Bedienungsanleitung

Albatron

Albatron KM18G PRO Bedienungsanleitung

Albatron

Albatron PI965GME-M Bedienungsanleitung

Albatron

Albatron KI51PV-754 Bedienungsanleitung

Beliebte Hauptplatine Handbücher anderer Marken

DFI

DFI SD170 Bedienungsanleitung

ASROCK

ASROCK ROMED8-2T Bedienungsanleitung

Asus

Asus P2L97A Bedienungsanleitung

Winmate

Winmate IC70 Bedienungsanleitung

Asus

Asus MES-B Bedienungsanleitung

Grantech

Grantech SYS8F377VGGA-3OMN Bedienungsanleitung

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Bedienungsanleitung

Texas Instruments

Texas Instruments ADS8372EVM Bedienungsanleitung

Commell

Commell MS-C73 Bedienungsanleitung

Gigabyte

Gigabyte GA-9IVDT Bedienungsanleitung

IBT Technologies

IBT Technologies MB860 Bedienungsanleitung

Nvidia

Nvidia TEGRA DG-04927-001_V01 Bedienungsanleitung

Intel

Intel D33217CK Bedienungsanleitung

Asus

Asus F1A55-M LX PLUS R2.0 Bedienungsanleitung

EPC

EPC EPC9147C Bedienungsanleitung

Asus

Asus EX-B760M-V5 D4 Bedienungsanleitung

EPOX

EPOX MU-8KHA0010 Bedienungsanleitung

Ski-Doo

Ski-Doo Bombardier MPEM 219 700 090 Bedienungsanleitung