Alcatel Speed Touch 591s Bedienungsanleitung

PRINTED ON

RECYCLED PAPER

Alcatel assumes no responsibility for the accuracy of the information presented, which is subject to change without notice.

Alcatel, the Alcatel logo, MainStreet, and Newbridge are registered trademarks of Alcatel. All other trademarks are the property

of their respective owners.

Disclaimers

Alcatel products are intended for commercial uses. Without the appropriate network design engineering, they must not be sold,

licensed or otherwise distributed for use in any hazardous environmentsrequiring fail-safe performance,such as in the operation

of nuclear facilities, aircraft navigation or communication systems, air traffic control, direct life-support machines, or weapons

systems, in which the failure of products could lead directly to death, personal injury, or severe physical or environmental

damage. The customer hereby agrees that the use, sale, licence or other distribution of the products for any such application

without the prior written consent of Alcatel, shall be at the customer's sole risk. The customer hereby agrees to defend and hold

Alcatel harmless from any claims for loss, cost, damage, expense or liability that may arise out of or in connection with the use,

sale, licence or other distribution of the products in such applications.

This document may contain information regarding the use and installation of non-Alcatel products. Please note that this

information is provided as a courtesy to assist you. While Alcatel tries to ensure that this information accurately reflects

information provided by the supplier, please refer to the materials provided with any non-Alcatel product and contact the

supplier for confirmation. Alcatel assumes no responsibility or liability for incorrect or incomplete information provided about

non-Alcatel products.

Alcatel has made reasonable efforts to ensure that the Speed Touch 591s, Release 2.0, complies in all material respects with the

"Referenced Detailed Functional Specification for Alcatel Product Date Compliance" for all loads. To obtain this document and

other information related to Year 2000 Date Compliance, visit the Alcatel Year 2000 Date Compliance website at the URL:

http://www.cid.alcatel.com/year2000/index.html

However, this does not constitute a representation or warranty. The warranties provided forAlcatel products, ifany, are setforth

in contractual documentation entered into by Alcatel and its customers.

This document was originally written in English. If there is any conflict or inconsistency between the English version and any

other version of a document, the English version shall prevail.

Speed Touch 591s Technical Practices iii

February 2001 90-8785-01

Table of contents

Foreword

Mandatory regulations

Overview

1 — Introduction

1.1 About SHDSL ................................................................................................... 1-2

1.2 Overview of the Speed Touch 591s .................................................................. 1-2

1.3 Compatibility ..................................................................................................... 1-4

1.4 Part numbers .................................................................................................... 1-5

2 — Features and typical applications

2.1 Frame relay ....................................................................................................... 2-2

2.2 V.35/X.21 circuit emulation ............................................................................... 2-4

2.3 T1/E1 circuit emulation ..................................................................................... 2-5

Table of contents

iv Speed Touch 591s Technical Practices

90-8785-01 February 2001

Installation

3 —Installation

3.1 Verifying the shipment ...................................................................................... 3-2

3.2 Installing the Speed Touch 591s and power supply ......................................... 3-3

Configuration

4 —Configuring generic node parameters

4.1 Node parameter configuration .......................................................................... 4-2

4.2 Configuring the network port ............................................................................. 4-8

5 —Configuring frame relay port parameters

5.1 Configuring the user port name and options ..................................................... 5-2

5.2 Configuring the user port stream ...................................................................... 5-6

5.3 Configuring user port stream options ................................................................ 5-8

5.4 Configuring frame forwarding stream options ................................................. 5-14

6 —Configuring frame relay connections

6.1 Configuring frame relay connection options ..................................................... 6-2

6.2 Configuring frame relay traffic parameters ....................................................... 6-4

6.3 Configuring network interworking ..................................................................... 6-5

6.4 Configuring service interworking ....................................................................... 6-7

6.5 Configuring frame forwarding connection options ............................................ 6-8

7 —TCA profiles

7.1 Overview ........................................................................................................... 7-2

7.2 TCA profile types and parameters .................................................................... 7-3

7.3 Maximum permissible time ............................................................................... 7-4

7.4 FRCC-type TCA profiles ................................................................................... 7-5

7.5 FRSC-type TCA profiles ................................................................................... 7-8

8 —Configuring the V.35/X.21 CE user port

8.1 Configuring the user port name and options ..................................................... 8-2

8.2 Configuring user port circuit parameters ........................................................... 8-5

9 —Configuring V.35/X.21 CE connections

9.1 Configuring connection options ........................................................................ 9-2

Table of contents

Speed Touch 591s Technical Practices v

February 2001 90-8785-01

10 —Configuring the T1/E1 CE port

10.1 Configuring the T1/E1 port name and service options .................................... 10-2

10.2 Configuring the T1 port physical options ........................................................ 10-5

10.3 Configuring the E1 port physical options ...................................................... 10-10

10.4 Configuring trunk conditioning parameters ................................................... 10-11

11 —Configuring T1/E1 CE connections

11.1 Connection options ......................................................................................... 11-2

12 —Configuring T1/E1 CE channel groups

12.1 Configuring channel groups ............................................................................ 12-2

12.2 Creating channel groups ................................................................................. 12-3

12.3 Adding channels ............................................................................................. 12-3

12.4 Naming channel groups ..................................................................................12-4

12.5 Displaying channels in a channel group ......................................................... 12-5

12.6 Configuring the padding octet pattern ............................................................. 12-5

12.7 Configuring the playout buffer size ................................................................. 12-6

12.8 Configuring the number of data octets ............................................................ 12-7

12.9 Deleting channels and channel groups ........................................................... 12-8

Maintenance

13 —Maintenance and file transfers

13.1 System maintenance ...................................................................................... 13-2

13.2 Network port maintenance .............................................................................. 13-4

13.3 User and T1/E1 port maintenance .................................................................. 13-5

13.4 File transfers ................................................................................................... 13-9

14 —Troubleshooting

14.1 LED activity ..................................................................................................... 14-2

14.2 Alarms ............................................................................................................. 14-4

15 —Statistics

15.1 Frame relay statistics ...................................................................................... 15-2

15.2 V.35/X.21 CE statistics ................................................................................... 15-6

15.3 T1 CE statistics ...............................................................................................15-9

15.4 E1 CE statistics .............................................................................................15-13

Table of contents

vi Speed Touch 591s Technical Practices

90-8785-01 February 2001

App A. Pin and signal assignments A-1

Glossary

Index

Speed Touch 591s Technical Practices vii

February 2001 90-8785-01

Foreword

This guide describes the Speed Touch 591s. It consists of the following chapters.

•Chapter 1 introduces SHDSL technology.

•Chapter 2 describes features and typical applications.

•Chapter 3 describes installation.

•Chapter 4 describes node configuration procedures that are common to all

versions.

•Chapters 5 to 7 describe configuration procedures for the frame relay version.

•Chapters 8 and 9 describe configuration procedures for the V.35 CE version.

•Chapters 10 to 12 describe configuration procedures for the T1 and E1 CE

versions.

•Chapter 13 describes maintenance and file transfers.

•Chapter 14 describes LED activity and alarms.

•Chapter 15 describes available statistics.

•The appendix lists pin and signal assignments for Speed Touch 591s ports.

Foreword

viii Speed Touch 591s Technical Practices

90-8785-01 February 2001

Conventions

The following conventions are used to indicate important information.

An em dash (—) in a table cell means that the information does not apply.

An empty cell in a table means that the system or component does not support the

item.

Steps with softkeys use ↵to indicate the Return key.

An asterisk (*) next to a softkey indicates the default option.

The procedures in this document do not direct you to select the PROCEED softkey;

follow the prompt on the screen.

Table 1 lists the documentation conventions used to describe the operations and

procedures in a node management session.

When there are options in a procedure, they are identified by letters, as shown in the

following sample procedure.

Procedure 1 Sample

1This step offers three options. Choose one of the options.

aThis is the first option.

bThis is the second option.

cThis is the third option.

2This step has no options.

Danger —Indicates that the described activity or situation may pose

a threat to personal safety.

Warning —Indicates that the described activity or situation may

cause equipment damage.

Caution —Indicates that the described activity or situation may

cause service interruption.

Note —Provides special information.

Foreword

Speed Touch 591s Technical Practices ix

February 2001 90-8785-01

Table 1 Documentation conventions for node management sessions

Softkey trees

Softkey trees are used throughout this document to provide an overview of the

configuration options available to the user. They are followed by specific

information on procedures and variables for each configuration option.

Convention Action Examples

<key> Enter a keyboard key ↵

<Esc>

SOFTKEY Select the softkey TO_ENDPOINT

PROCEED

<identifier> Enter the object identifier <shelf>

<slot>

<value> Enter the numeric value <5>

<word> Enter characters exactly as shown <CPSS>

Foreword

x Speed Touch 591s Technical Practices

90-8785-01 February 2001

Inhaltsverzeichnis

Andere Alcatel Netzwerk-Router Handbücher

Alcatel

Alcatel OS6850-48L Bedienungsanleitung

Alcatel

Alcatel LINKHUB HH71V1 Bedienungsanleitung

Alcatel

Alcatel LINKHUB HH71VM Bedienungsanleitung

Alcatel

Alcatel OmniAccess 600- series Bedienungsanleitung

Alcatel

Alcatel LINKZONE 2 Bedienungsanleitung

Alcatel

Alcatel LINKZONE Bedienungsanleitung

Alcatel

Alcatel OS6602-24 Bedienungsanleitung

Alcatel

Alcatel SPEED TOUCH PRO Bedienungsanleitung

Alcatel

Alcatel Speed Touch Home Bedienungsanleitung

Alcatel

Alcatel one touch Home H850 Bedienungsanleitung

Alcatel

Alcatel G-010G-P Bedienungsanleitung

Alcatel

Alcatel Y850 Bedienungsanleitung

Alcatel

Alcatel Y901NB Bedienungsanleitung

Alcatel

Alcatel SpeedTouch 570 Sicherheitsleitfaden

Alcatel

Alcatel SPEED TOUCH PRO Bedienungsanleitung

Alcatel

Alcatel OneTouch Home H200 Bedienungsanleitung

Alcatel

Alcatel Linkhub HH40V Bedienungsanleitung

Alcatel

Alcatel OmniSwitch 8800 Installationshandbuch

Alcatel

Alcatel SPEED TOUCH 570 Bedienungsanleitung

Alcatel

Alcatel AST570 Bedienungsanleitung

Alcatel

Alcatel SPEED TOUCH 710 Bedienungsanleitung

Alcatel

Alcatel 3EC 16964 AAAA-AAZZA Bedienungsanleitung

Alcatel

Alcatel SPEEDTOUCH 710 Bedienungsanleitung

Alcatel

Alcatel OmniAccess 601 Bedienungsanleitung

Beliebte Netzwerk-Router Handbücher anderer Marken

Allnet

Allnet ALL0333AU Bedienungsanleitung

HomeSeer

HomeSeer HT-SEL Bedienungsanleitung

Sercomm

Sercomm Genesis OC3505D Bedienungsanleitung

Billion

Billion BIPAC 5102 Series Bedienungsanleitung

TP-Link

TP-Link TD-8817 Bedienungsanleitung

Motorola

Motorola MR1900 Bedienungsanleitung

Digi

Digi IX14 Bedienungsanleitung

Cisco

Cisco NCS 540 Handbuch

XAVi

XAVi X8821e Bedienungsanleitung

BEC

BEC 6200WZL Bedienungsanleitung

MikroTik

MikroTik hAP ac3 Series Bedienungsanleitung

Korenix

Korenix JetNet 5428G Series Bedienungsanleitung

NETGEAR

NETGEAR FS526T - Switch Bedienungsanleitung

Korenix

Korenix JetNet 5710G Series Bedienungsanleitung

Automated Logic

Automated Logic ZN551 Betriebsanleitung

Cisco

Cisco ASR 1000 Series Bedienerhandbuch

EnGenius

EnGenius ESR-9710 Bedienungsanleitung

Cisco

Cisco 805 Series Bedienungs- und Sicherheitshinweise