Alecto DBX-89 Bedienungsanleitung

USERS MANUAL

DBX-89

1 ECO MODE

This Alecto DBX-89 babyphone is equipped with an unique

ECO mode. Already in normal operation mode, the baby-

unit stops transmission when the baby is not crying. In

Full Eco mode it even suppresses the controlling signals

between the baby-unit and the parent unit, so no transmit-

ting at all.

Next to the Full eco mode, you can set the output power.

In case you are at home with your baby not far away, you

can set the babyphone in half range mode, with low trans-

mitting power and reduced power consumption. In case

the baby is not close to you, you may switch to full range.

Attention: once the baby produces noise, the baby-unit is

activated and contacts the parent unit. This causes a small

delay which means that short sounds from the baby may

not be heard by you. In case you really want to hear all

sounds from the baby room, you must set the sensitivity

to maximum; with this setting the baby-unit is constantly

active.

2 OVERVIEW

2.1 OVERVIEW PARENT UNIT:

9 microphone (for the talk back

feature

10 volume up; down button when

programming

11 start/stop lullaby

12 lamps (see paragraph 2.4)

: link check

: low battery / charging

: FULL ECO

1 sound indication LED’s

2 talk back button

3 display (see paragraph 2.3)

4 power on/off

5 volume down; down button

when programming

6 MENU

7 loudspeaker

8 DC input for power adapter

2.2 OVERVIEW BABY UNIT:

1 temperature sensor (backside

baby unit

2 built-in nightlight (not visible

when switched-off

3 display (see paragraph 2.3)

4 power on/off

5 selection lullaby

6 volume-down

7 start-stop lullaby

8 loudspeaker

9 volume-up

10 page (to page the parent unit)

11 DC input for power adapter

12 nightlight

13 microphone

14 lamps (see paragraph 2.4)

: power

: low battery

2.3 OVERVIEW DISPLAY:

on when night light is enabled

off when night light is disabled

on when lullaby is playing

on when the speaker volume is turned

off; off when the speaker volume is

turned on

on when sound alert is enabled

flashes when sound alert is triggered

on when Celsius temperature format is selected

on when Fahrenheit temperature format is selected

on when temperature alert is enabled, flashes when

temperature alert is triggered

on when vibration alert is enabled, flashes when vibration

alert is triggered

on when the alarm time/count down timer is set, flashes

when the alarm time/count down timer is arrived

displaying of the

several functions

and warnings

during use

displaying of the

several settings

during program-

ming

battery indication:

full battery level

2/3 battery level

1/3 battery level

battery empty

parent unit: this indication animates in cycle while charging

baby-unit: this indication does not light when the power

adapter is connected

2.4 OVERVIEW LAMPS:

Baby unit:

Lamp : Power Indicator

on when the parent unit is switched on

off when the parent unit is switched off

Lamp : Low Battery Indicator

ﬂashes when low battery is detected

Parent unit:

Lamp : Low Battery / Charging Indicator

on steadily when in charging mode

blinks when low battery level is detected

Lamp : Link indicator

ﬂashes when there is no link between baby unit and

parent unit or parent unit is out of range with the baby unit.

on steadily when linked to the baby unit

off during FULL ECO mode

in the full eco mode this lamp only lights when the parent unit

actual receives noise from the baby unit; in idle state this

lamp is OFF during FULL ECO mode

Lamp : ECO Indicator

off when FULL ECO mode feature is OFF

on steadily if Full ECO setting is ON

3 INSTALLATION

3.1 PARENT UNIT:

The parent unit is powered by 2 supplied rechargeable

batteries. These batteries are charged through the inclu-

ded power adapter.

ATTENTION:

NEVER install normal batteries in the parent unit.

Normal batteries cannot be charged and will

damage the parent unit when charged.

Remove the battery compartment cover.

Insert 2 x AA rechargeable batteries,

observing their polarities, into the battery

compartment on the parent Unit.

Replace the battery door on the Parent

Unit.

Connect the output plug of the mains adapter to

the DC socket on the side of the baby unit and the

mains adapter to the wall mains supply.

The LOW BATTERY/CHARGING LED comes on

and charging begins. As soon as the battery icon

in the LCD lights steadily, the batteries are fully

charged.

NOTE

If no batteries are inserted in the parent unit, it can still be

powered on when connecting to the mains power.

3.2 BABY UNIT:

You can use the baby unit from the mains power or on

alkaline batteries. Even if you are going to use the unit

from the mains, you are recommended to insert alkaline

batteries (excl.). This guarantees automatic backup in

case of mains failure.

Remove the battery compartment cover.

Insert 4x AA alkaline batteries.

Reattach the battery compartment cover.

Connect the output plug of the mains adapter to

the DC socket on the side of the baby unit and the

mains adapter to the wall mains supply.

Only use normal Alkaline batteries in the Baby unit.

3.3 RECOMMENDATIONS:

Avoid exposure of the units to moisture or liquid.

Clean the units with a damp cloth.

Do not expose the units to extreme heat or direct

sunlight.

To prevent electric shock, do not open the cabinets

of the baby unit, parent unit and charger.

Avoid metallic contact (e.g. metal clips, keys) bet-

ween the battery contacts and charging conductors.

Read the marking on the mains adapter for the

mains supply required for this baby monitor.

Make sure the baby unit and mains adaptor cable

are always out of reach of the baby.

Never place the baby unit inside your baby’s cot,

bed or playpen.

Never cover the units such as with clothes, towels or

blankets.

•

Follow the local regulations regarding the disposal

of your packing materials, exhausted batteries and

used units. Wherever possible, recycle those mate-

rials.

•

4 USING YOUR BABY

MONITOR

Please read these instructions carefully, and be reminded

that this baby monitor is just intended as an aid. It is not a

substitute for responsible, correct parental supervision.

4.1 POWER ON/OFF:

provided the parent unit is off, press

and hold <POWER> for about 2

seconds to switch-ON the unit

provided the parent unit is on, press

and hold <POWER> for about 2

seconds to switch-OFF the unit

4.2 LINK CHECK:

As soon as the parent unit is turned on, it starts looking

for the baby unit.

The link-led blinks and the text [SEARCHING]

comes on the display

As soon as the parent unit finds the baby unit, the

link-LED lights steadily,

In case the parent unit cannot find the baby unit

within a period of 30 seconds (because it is not yet

switched on, the batteries of the baby-unit are empty

or the distance is too large), the text [ NOT LINKED]

comes on the display and attention tones sound

every 10 seconds.

2 sec.

Inhaltsverzeichnis

Andere Alecto Babyphone Handbücher

Alecto

Alecto DBX-83 Bedienungsanleitung

Alecto

Alecto DVM-370 Bedienungsanleitung

Alecto

Alecto DBX-85 eco Bedienungsanleitung

Alecto

Alecto DVM-150 Bedienungsanleitung

Alecto

Alecto DOS-150+ Bedienungsanleitung

Alecto

Alecto DBX-93 Bedienungsanleitung

Alecto

Alecto DVM-71 Bedienungsanleitung

Alecto

Alecto DBX-69 Bedienungsanleitung

Alecto

Alecto DIVM-550 Bedienungsanleitung

Alecto

Alecto DBX-68 Bedienungsanleitung

Alecto

Alecto DVM-77 Bedienungsanleitung

Alecto

Alecto IVM-180 Bedienungsanleitung

Alecto

Alecto DVM-70 Bedienungsanleitung

Alecto

Alecto DBX-77 Bedienungsanleitung

Alecto

Alecto DOS-150 Bedienungsanleitung

Alecto

Alecto DBX-37 Bedienungsanleitung

Alecto

Alecto DBX-60 Bedienungsanleitung

Alecto

Alecto DBX-99 Bedienungsanleitung

Alecto

Alecto DBX68GS Bedienungsanleitung

Alecto

Alecto DVM-80 Bedienungsanleitung

Alecto

Alecto DBX-90 Bedienungsanleitung

Alecto

Alecto DVM-65 Bedienungsanleitung

Alecto

Alecto DBX-85GS Bedienungsanleitung

Alecto

Alecto DVM-201 Bedienungsanleitung

Beliebte Babyphone Handbücher anderer Marken

Philips

Philips SCD 469 Bedienungsanleitung

Oricom

Oricom Babysense 7 Bedienungsanleitung

Levana

Levana TW502 Bedienungsanleitung

Luvion

Luvion Essential Bedienungsanleitung

Philips

Philips AVENT SCD841 Bedienungsanleitung

NUK

NUK Eco Control Video Display 550VD Bedienungsanleitung

Lorex

Lorex sweet peek mini Bedienungsanleitung

Mondevices

Mondevices MonBaby 2 Bedienungsanleitung

Famidoc

Famidoc FDBB-V2 Bedienungsanleitung

Graco

Graco iMonitor 2797 Bedienungsanleitung

babymoov

babymoov High Care A014001 Bedienungsanleitung

Ramili

Ramili RV1000 Bedienungsanleitung

Philips

Philips SBC SC364 Bedienungsanleitung

Swann

Swann SW231-FLO Bedienungsanleitung

Badabulle

Badabulle Baby Online 300 m+ Bedienungsanleitung

Philips AVENT

Philips AVENT SCD526/00 Bedienungsanleitung

Uniden

Uniden Guardian UBR223 Bedienungsanleitung

Summer

Summer Day & Night 28470A Bedienungsanleitung