Align Trex 700 Electric conversion Bedienungsanleitung

www.KDEDirect.com

TREX 700 NITRO ELECTRONIC CONVERSION KIT

INSTALLATION INSTRUCTIONS

TOOLS REQUIRED:

4.5 mm Drill Bit (or equivalent ANSI #16 drill bit)

Manual or Power Drill

Motor Mount Installation Adhesive Diagrams (supplied with kit)

Drill the four orange-highlighted holes to 4.5 mm

diameter using the required drill bit and a manual

and/or power drill.

Attach the Motor Mount Installation Adhesive Diagram

to the frame (left and right sides provided for

corresponding frame pieces).

Drill the three Motor Mount hole locations (previous M3

mount editions have two locations) to 4.5 mm diameter

as directed by the orange crosshairs shown on the

Adhesive Diagram.

REVISION 4

www.KDEDirect.com

TREX 700 NITRO ELECTRONIC CONVERSION KIT

INSTALLATION INSTRUCTIONS

Install the M3 x 0.5 x 8 mm Socket Button Head Collar Screws to the blue-highlighted

locations (installation repeated on opposite side of frame).

Install the M3 Flat Washer, M3 x 0.5 Locknut, and the original Canopy Mounting Bolt to the

red-highlighted locations.

PARTS REQUIRED:

M3 x 0.5 x 8 mm Socket Button Head Collar Screws (included in original T700N kit)

M3 Flat Washers (supplied with kit)

M3 x 0.5 Locknuts (supplied with kit)

www.KDEDirect.com

TREX 700 NITRO ELECTRONIC CONVERSION KIT

INSTALLATION INSTRUCTIONS

Install the M3 x 0.5 x 8 mm Socket Button Head Collar Screws to the blue-highlighted

locations (center location included in latest production M3/M4 Motor Mounts).

Install the servos to the frame components using the M2.5 x 0.45 x 14 mm Button Head

Socket Head Cap Screws to the yellow-highlighted locations. The stock, self-tapping T2.6 x

14 mm screws are used for the plastic, threaded-hole locations (example: orange-highlighted

locations shown in the figure below).

PARTS REQUIRED:

M3 x 0.5 x 8 mm Socket Button Head Collar Screws (included in original T700N kit)

M2.5 x 0.45 x 14 mm Button Head Socket Head Cap Screws (supplied with kit)

T2.6 x 14 mm Button Head Self-Tapping Screws (included in original T700N kit)

www.KDEDirect.com

TREX 700 NITRO ELECTRONIC CONVERSION KIT

INSTALLATION INSTRUCTIONS

Install the M3 x 0.5 x 8 mm Socket Button Head Collar Screws to the blue-highlighted

locations.

Install the M3 Flat Washer and M3 x 0.5 Locknut to the red-highlighted location, which will

secure the frame to the original carbon braces.

PARTS REQUIRED:

M3 x 0.5 x 8 mm Socket Button Head Collar Screws (included in original T700N kit)

M3 Flat Washers (supplied with kit)

M3 x 0.5 Locknuts (supplied with kit)

M4 x 0.7 x 20 mm Socket Head Cap Screws (supplied with kit)

M4 Wide Flat Washers (included in original T700N kit)

M4 Flat Washers (supplied with kit)

Install the original Tail Boom Brace to the green-highlighted location with the

following fasteners in sequential order:

1. M4 x 0.7 x 20 mm Socket Head Cap Screw

2. M4 Wide Flat Washer

3. Tail Boom Brace Plastic Mount

4. M4 Flat Washer (x2, double-stacked for ~2.0 mm spacing)

5. Carbon Fiber Frame Brace

6. Carbon Fiber Main Frame

7. Aluminum Bottom Bracket Upgrade (rear M4 tapped hole location)

www.KDEDirect.com

TREX 700 NITRO ELECTRONIC CONVERSION KIT

INSTALLATION INSTRUCTIONS

Install the landing gear using the original T700N components (refer to the stock T700N manual

if needed).

Repeat all steps for the opposite Carbon Fiber Main Frame side and tighten all fasteners

(apply Loctite 242 to all fasteners during installation to prevent loosening during flight).

www.KDEDirect.com

TREX 700 NITRO ELECTRONIC CONVERSION KIT

INSTALLATION INSTRUCTIONS

The installation has been completed! Enjoy your new TREX 700N E-Conversion and make

sure to check the KDE Direct website (www.kdedirect.com) for newly released upgrades and

additions to your TREX 700 E-Conversion including:

TREX 700N E-Conversion Electronic Pinion Support

TREX 700N E-Conversion Elevator Servo Mount

TREX 700N E-Conversion Main Drive Gear, 115T, MOD 1.0

TREX 700N E-Conversion Performance Tail Upgrade V2

TREX 700N E-Conversion Thrusted Metal Bearing Blocks

TREX 700N E-Conversion Vertical Stabilizer Mount

KDE Direct 1917H-N42 High-Performance Brushless Motor

Andere Handbücher für Trex 700 Electric conversion

Inhaltsverzeichnis

Andere Align Spielzeug Handbücher

Align

Align T-Rex 500 ESP KX017011T Bedienungsanleitung

Align

Align TREX 700E V2 Bedienungsanleitung

Align

Align T-REX 700E F3C V2 KX018E11T Bedienungsanleitung

Align

Align Trex 450XL CCPM Bedienungsanleitung

Align

Align Combo T-REX 550E Bedienungsanleitung

Align

Align Trex 450XL CCPM Bedienungsanleitung

Align

Align T-REX 450PRO Bedienungsanleitung

Align

Align T-Rex 450 SE Bedienungsanleitung

Align

Align T-REX 250PRO DFC KX019011T Bedienungsanleitung

Align

Align Combo T-REX 550E Bedienungsanleitung

Align

Align T-REX 450X Bedienungsanleitung

Align

Align T-rex 450SE Bedienungsanleitung

Align

Align T-Rex 700 Nitro Pro Bedienungsanleitung

Align

Align nitro trex 600 KX0160NPNT Bedienungsanleitung

Align

Align Trex 500ESP Bedienungsanleitung

Align

Align Super Combo T-Rex 700E F3C KX018E06T Bedienungsanleitung

Align

Align Trex 700 Electric conversion Bedienungsanleitung

Align

Align T-Rex 700E Combo Bedienungsanleitung

Align

Align Trex 150 SFC RH15E01XT Bedienungsanleitung

Align

Align T-REX 450PRO Bedienungsanleitung

Align

Align Trex600 ESP KX016013T Bedienungsanleitung

Align

Align RH50E07XT Bedienungsanleitung

Align

Align Trex 150 SFC RH15E01XT Bedienungsanleitung

Align

Align T-rex 450SE Bedienungsanleitung

Beliebte Spielzeug Handbücher anderer Marken

marklin

marklin 37321 Bedienungsanleitung

Canon

Canon PAPER CRAFT Bedienungsanleitung

GREAT PLANES

GREAT PLANES Pitts M-12S Bedienungsanleitung

NOCH

NOCH 14261 Bedienungsanleitung

Hausler

Hausler 450 SE V2 Bedienungsanleitung

Dynaflite

Dynaflite Daydream Bedienungsanleitung

MiniacRC

MiniacRC MIGHTY MINI P40 WARHAWK Handbuch

Kenner

Kenner Batman 63651 Bedienungsanleitung

LEGO

LEGO 8527 Bedienungsanleitung

iKarus

iKarus ECO 8 Bedienungsanleitung

Multiplex

Multiplex EasyStar II Bedienungsanleitung

Walkera

Walkera 38 Bedienungsanleitung

Hasbro

Hasbro TRANSFORMERS BUMBLEBEE Bedienungsanleitung

MD MXION SWD Bedienungsanleitung

Mattel

Mattel Disney Pixar Cars Cozy Cone Spiral Rampway Bedienungsanleitung

marklin

marklin 39671 Bedienungsanleitung

Meccano

Meccano 15103 Bedienungsanleitung

LEGO

LEGO TECHNIC 8735 Bedienungsanleitung