Allen-Bradley Bulletin 1203 Series Bedienungsanleitung

User

Manual

Bulletin 1203

Serial Communications

Module

(Series B)

RS232/422/483 (Using DF1 Protocol)

DH485

(Cat. No. 1203–GD2, –GK2, –GM2)

Allen-Bradley

Solid state equipment has operational characteristics differing from

those of electromechanical equipment. “Safety Guidelines for the

Application, Installation and Maintenance of Solid State Controls”

(Publication SGI-1.1) describes some important differences between

solid state equipment and hard–wired electromechanical devices.

Because of this difference, and also because of the wide variety of

uses for solid state equipment, all persons responsible for applying

this equipment must satisfy themselves that each intended

application of this equipment is acceptable.

In no event will the Allen-Bradley Company be responsible or liable

for indirect or consequential damages resulting from the use or

application of this equipment.

The examples and diagrams in this manual are included solely for

illustrative purposes. Because of the many variables and

requirements associated with any particular installation, the

Allen-Bradley Company cannot assume responsibility or liability for

actual use based on the examples and diagrams.

No patent liability is assumed by Allen-Bradley Company with

respect to use of information, circuits, equipment, or software

described in this manual.

Reproduction of the contents of this manual, in whole or in part,

without written permission of the Allen-Bradley Company is

prohibited.

Throughout this manual we use notes to make you aware of safety

considerations.

!ATTENTION: Identifies information about practices

or circumstances that can lead to personal injury or

death, property damage, or economic loss.

Attentions help you:

•identify a hazard

•avoid the hazard

•recognize the consequences

Important: Identifies information that is especially important for

successful application and understanding of the product.

PLC, PLC–2, PLC–3, PLC–5, SLC, SLC 500, PanelView, RediPANEL, Data Highway Plus, and Dataliner are trademarks of

Allen-Bradley Company, Inc.

IBM is a registered trademark of International Business Machines, Incorporated.

Important User Information

Who Should Use this Manual P–1. . . . . . . . . . . . . . . . . . . . . . . . . . . .

Purpose of this Manual P–1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Contents of this Manual P–2. . . . . . . . . . . . . . . . . . . . . . . . . . . .

RelatedDocumentation P–2. . . . . . . . . . . . . . . . . . . . . . . . . . . .

Terms and Abbreviations P–3. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Conventions P–3. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Firmware Support P–3. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

SafetyPrecautions P–3. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Serial Device Compatibility P–4. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Allen–BradleySupport P–4. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Local Product Support P–4. . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Technical Product Assistance P–4. . . . . . . . . . . . . . . . . . . . . . . .

Chapter 1

ChapterObjectives 1–1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

ModuleDescription 1–1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

SCANport Device Compatibility 1–2. . . . . . . . . . . . . . . . . . . . . . . . . . .

ConfigurationSwitches 1–6. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Chapter 2

ChapterObjectives 2–1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Setting Module Configuration Switches 2–1. . . . . . . . . . . . . . . . . . . . .

Switch SW1 2–3. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

DF1/DH–485 Address Selection 2–4. . . . . . . . . . . . . . . . . . . . . .

DF1 Address Selection 2–5. . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Switch SW2 2–6. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Switch SW3 2–8. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Mounting the Serial Communications Module 2–10. . . . . . . . . . . . . . . . .

Enclosed Style Serial Communications Module Dimensions 2–12. . . . . .

ConnectingCables 2–13. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

1746-BAS Module Serial Connections 2–13. . . . . . . . . . . . . . . . . .

IBM PC Compatible Serial Connections 2–14. . . . . . . . . . . . . . . . .

1747–AIC Link Coupler Serial Connections 2–14. . . . . . . . . . . . . .

PLC5 Channel 0 Serial Connections 2–15. . . . . . . . . . . . . . . . . . .

SCANport Link Connection 2–16. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

1305 Drive 2–16. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

1336 PLUS and 1336 FORCE2–17. . . . . . . . . . . . . . . . . . . . . .

1394 2–17. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

SMP 3 2–17. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Power Supply Connections 2–18. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Table of Contents

Preface

Product Description

Installation

Table of Contentsii

Chapter 3

ChapterObjectives 3–1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

SCANport Datalinks 3–1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Chapter 4

ChapterObjectives 4–1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Serial Communications Module Data Table Structure 4–1. . . . . . . . . . .

Supported PCCC Command List 4–2. . . . . . . . . . . . . . . . . . . . . .

Data Table Structure 4–3. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

ConfigurationExamples 4–9. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

DF1 Messaging with a PLC–5/80 Example 4–9. . . . . . . . . . . . . . .

DF1 Messaging with a 1746–BAS Module Example 4–11. . . . . . . .

DH–485 Messaging with a SLC5/03 Interface 4–13. . . . . . . . . . . . .

Chapter 5

ChapterObjectives 5–1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Block Transfer Status Word 5–1. . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Scattered Parameter Value Read 5–2. . . . . . . . . . . . . . . . . . . . . . . . .

Scattered Parameter Value Write 5–4. . . . . . . . . . . . . . . . . . . . . . . . .

Product ID Number Read 5–6. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Parameter Read Full 5–8. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Parameter Value Read 5–11. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Parameter Value Write 5–12. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

EE Memory Functions 5–13. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

FaultClear/Reset 5–15. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Fault Queue Entry Read Full 5–16. . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Fault Queue Size 5–18. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Trip Fault Queue Number 5–19. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Chapter 6

ChapterObjectives 6–1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

LED Locations 6–1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

LED Troubleshooting Table 6–2. . . . . . . . . . . . . . . . . . . . . . . . . .

Chapter 7

ChapterObjectives 7–1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

ProductSpecifications 7–1. . . . . . . . . . . . . . . . . . . . . . . . . . . . .

ModuleCompatibility 7–1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

SCANport Datalink

Operation

Configuring and Interfacing

Block Transfer Emulation

Instructions

Troubleshooting

Specifications

Preface

1203–5. 5September1995

Preface

Read this preface to familiarize yourself with the rest of the manual.

This preface covers the following topics:

•who should use this manual

•the purpose of this manual

•terms and abbreviations

•conventions used in this manual

•safety precautions

•Allen–Bradley support

Use this manual if you are responsible for setting up and servicing

the Serial Communications Module. You must have previous

experience with and a basic understanding of communications

terminology, configuration procedures, required equipment, and

safety precautions.

To use this Serial Communications Module efficiently, you must be

able to program and operate serial communications devices, as well

as have a basic understanding of the parameter settings and functions

of the device to which you are communicating.

This manual is an installation and user guide for the Serial

Communications Module. The Serial Communications Module is

available for products that include the SCANportcommunications

port.

This manual provides you with the following:

•an overview of the Serial Communications Module

•the procedures you need to install, configure, and troubleshoot the

Serial Communications Module

For information on specific features of Allen–Bradley products

mentioned within this manual, refer to the user manual for that

product.

Important:You should read this manual in its entirety before

installing, operating, servicing, or initializing the Serial

Communications Module.

Who Should Use this

Manual

Purpose of this Manual

P–2

1203–5.5September1995

Contents of this Manual

Chapter Title Contents

Preface Describes the purpose, background, and scope of

this manual. Also specifies the audience for whom

this manual is intended.

1Product Description Explains the Serial Communications Module’s

features, configuration, and diagnostics.

2 Installation Provides procedures for mounting, connecting

power, configuring switches, cabling, and

connecting hardware.

3SCANport Datalink

Operation Provides information for configuring SCANport

device datalinks and datalink operation.

4Configuring and

Interfacing Provides information about addressing, information

transfer, and sample programs.

5Block Transfer Emulation

Instructions Provides information for using the block transfer

emulation instructions.

6 Troubleshooting Explains how to interpret and correct problems with

your Serial Communications Module.

7 Specifications Provides environmental, electrical, and

communications specifications.

Related Documentation

The following documents contain additional information concerning

Allen–Bradley SLCtand PLC products. To obtain a copy, contact

your local Allen–Bradley office or distributor.

For Read This Document Document

Number

Information about the DH–485 network Data Highway/Data Highway Plus/DH–485

Communication Protocol and Command Set 1770–6.5.16

Additional information about setting up the DH–485 network on

your SLC 500SLC 500Modular Hardware Style 1747–NI002,

Series A

A complete listing of current Allen–Bradley documentation,

including ordering instructions. Also indicates whether the

documents are available on CD–ROM or in multi–languages. Allen–Bradley Publication Index SD499

A glossary of industrial automation terms and abbreviations Allen–Bradley Industrial Automation Glossary AG–7.1

Information about the MSG block Instruction Set Reference 6200–6.4.11

Information about configuring the PLC–5 channel 0 hardware Hardware Installation Manual 1785–6.6.1

Information about configuring the PLC–5 channel 0 driver Software Configuration and Maintenance 6200–6.4.6

Preface P–3

1203–5.5September1995

The following terms and abbreviations are specific to this product.

For a complete listing of Allen–Bradley terminology, refer to the

Allen–Bradley Industrial Automation Glossary, Publication Number

ICCG–7.1. In this manual, we refer to the:

•Variable Frequency AC Drive (Bulletin 1305, 1336 FORCE,

1336 PLUS, 1395, 1557, SMC, SMC Plus, or SMC dialog) as

the drive or SCANport device.

•Programmable Logic Controller as the Programmable Controller

or PLC.

•Earth Ground as GND.

The following conventions are used throughout this manual:

•Bulleted lists such as this one provide information, not procedural

steps.

•Numbered lists provide sequential steps or hierarchical

information.

•Italic type is used for emphasis.

•Text in this font indicates words or phrases you should type.

This manual supports communications module firmware versions

2.xx (the “xx” designator may vary). Features that work with

specific firmware versions will be denoted as such.

!ATTENTION: Only personnel familiar with

SCANport devices and associated machinery should

plan or implement the installation, start–up,

configuration, and subsequent maintenance of the serial

communications module. Failure to comply may result

in personal injury and/or equipment damage.

!ATTENTION: This module contains Electrostatic

Discharge (ESD) sensitive parts and assemblies. Static

control precautions are required when installing,

testing, servicing, or repairing this assembly.

Component damage may result if ESD control

procedures are not followed. If you are not familiar

with static control procedures, refer to Allen–Bradley

Publication 8000–4.5.2, Guarding Against Electrostatic

Damage or any other applicable ESD protection

handbook.

Terms and Abbreviations

Conventions

Firmware Support

Safety Precautions

P–4

1203–5.5September1995

This Serial Communications Module is intended for use with devices

that communicate via the following protocols:

Hardware Standard Communications Protocol

RS–232 DF1

RS–422 DF1

RS–485 DF1

DH–485 DH–485

Allen–Bradley offers support services worldwide, with over 75

Sales/Support Offices, 512 authorized Distributors, and 260

authorized Systems Integrators located throughout the United States

alone, plus Allen–Bradley representatives in every major country in

the world.

Local Product Support

Contact your local Allen–Bradley representative for:

•sales and order support

•product technical training

•warranty support

•support service agreements

Technical Product Assistance

If you need to contact Allen–Bradley for technical assistance, please

review the information in the Troubleshooting chapter first. Then

call your local Allen–Bradley representative.

Serial Device Compatibility

Allen–Bradley Support

Chapter

1203–5.5September1995

Product Description

In this chapter, you will read about:

•Serial Communications Module features

•the location of configuration switches

The Serial Communications Module is an optional interface device

designed to provide a direct digital link between serial

communications devices and any device that uses SCANport. The

current list of products that use SCANport includes: 1305, 1336

PLUS, 1336 FORCE, 1394, SMP3 controllers, and 1557 medium

voltage drives. The module connects to these products via

SCANport.

The Serial Communications Module is available in both Open style

(Figure 1.1) and Enclosed (Figure 1.2) type configurations. The

Open style module mounts inside certain drives, depending on drive

size. The Enclosed module mounts independently and can be used

with any SCANport device. The following table provides more

information about the Open and Enclosed styles.

Designation Enclosure Power Supply Source Used With

Open Style Open PC Board Supplied by the drive 1336 PLUS*

1336 FORCE**

1394***

Enclosed IP30 24V DC separately supplied or

120/240V AC separately supplied 1305

1336 PLUS

1336 FORCE

1394

SMP3

Other SCANport products

* 7.5HP and higher sizes only, excluding the AQF and BRF catalog number drives

** 7.5HP and higher sizes with Standard Adapter board only

*** analog 1394 only

Chapter Objectives

Module Description

1–2 Product Description

1203–5.5September1995

The SCANport Serial Communications Module is compatible with

the following Allen–Bradley devices:

Device Firmware Revision

1336 PLUS All

1336 FORCE All

1305 Micro Drive 2.0 or newer

SMC

SMP

1394

1557

SCANport Device

Compatibility

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Allen-Bradley Steuereinheit Handbücher

Allen-Bradley

Allen-Bradley ControlNet-to-DeviceNet 1788-CN2DN Bedienungsanleitung

Allen-Bradley

Allen-Bradley ControlLogix DeviceNet C Series Bedienungsanleitung

Allen-Bradley

Allen-Bradley 1756 Series Bedienungsanleitung

Allen-Bradley

Allen-Bradley Compact 5000 Bedienungsanleitung

Allen-Bradley

Allen-Bradley MicroLogix 1200 Bedienungsanleitung

Allen-Bradley

Allen-Bradley 1732ES-IB16 Bedienungsanleitung

Allen-Bradley

Allen-Bradley 1492-AIFM16-F-5 Bedienungsanleitung

Allen-Bradley

Allen-Bradley 1492-CM1771-LD006 Bedienungsanleitung

Allen-Bradley

Allen-Bradley ControlLogix 1756-DHRIO Bedienungsanleitung

Allen-Bradley

Allen-Bradley 1407-CGCM-DLR Bedienungsanleitung

Allen-Bradley

Allen-Bradley 193-DNENCAT Bedienungsanleitung

Allen-Bradley

Allen-Bradley 1769-ASCII Bedienungsanleitung

Allen-Bradley

Allen-Bradley 1757-ABRIO Bedienungsanleitung

Allen-Bradley

Allen-Bradley ControlLogix DeviceNet 1756-DNB Bedienungsanleitung

Allen-Bradley

Allen-Bradley 1747-KE Bedienungsanleitung

Allen-Bradley

Allen-Bradley Logix5000 Series Bedienungsanleitung

Allen-Bradley

Allen-Bradley 140G-H Bedienungsanleitung

Allen-Bradley

Allen-Bradley POINT I/O 1734-4IOL Bedienungsanleitung

Allen-Bradley

Allen-Bradley ControlLogix 1756-ENET/B Bedienungsanleitung

Allen-Bradley

Allen-Bradley C Series Bedienungsanleitung

Allen-Bradley

Allen-Bradley OptiSIS 1711-P05SISID050S Bedienungsanleitung

Allen-Bradley

Allen-Bradley 1771-OD Installations- und Benutzerhandbuch

Allen-Bradley

Allen-Bradley ControlNet 1747-SCNR Bedienungsanleitung

Allen-Bradley

Allen-Bradley ControlLogix 1756-DMD30 Bedienungsanleitung

Beliebte Steuereinheit Handbücher anderer Marken

Festo

Festo Compact Performance CP-FB6-E Stücklistenhandbuch

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Bedienungsanleitung

JS Automation

JS Automation MPC3034A Bedienungsanleitung

JAUDT

JAUDT SW GII 6406 Series Kurzanleitung

Spektrum

Spektrum Air Module System Bedienungsanleitung

BOC Edwards

BOC Edwards Q Series Bedienungsanleitung

KHADAS

KHADAS BT Magic Bedienungsanleitung

Etherma

Etherma eNEXHO-IL Bedienungsanleitung

PMFoundations

PMFoundations Attenuverter Bedienungsanleitung

GEA

GEA VARIVENT Bedienungsanleitung

Walther Systemtechnik

Walther Systemtechnik VMS-05 Bedienungsanleitung

Altronix

Altronix LINQ8PD Montageanleitung

Eaton

Eaton Powerware Series Bedienungsanleitung

WAGO

WAGO 750-407/040-000 Bedienungsanleitung

Sony

Sony CCU-590 Bedienungsanleitung

Graco

Graco 25D614 Bedienungsanleitung

Task Force Tips

Task Force Tips YE-RF-900 Programmierhandbuch

Shini

Shini SPV-U Series Bedienungsanleitung