Allen-Bradley Logix5000 Series Betriebsanleitung

Logix5000 Controllers I/O and Tag Data

Catalog Numbers

1756 ControlLogix, 1756 GuardLogix,

1768 Compact GuardLogix, 1769 CompactLogix, 1789 SoftLogix,

PowerFlex with DriveLogix

Programming Manual

Important User Information

Solid state equipment has operational characteristics differing from those of electromechanical equipment. Safety Guidelines

for the Application, Installation and Maintenance of Solid State Controls (publication SGI-1.1 available from your local Rockwell

Automation sales office or online at http://www.rockwellautomation.com/literature/) describes some important differences

between solid state equipment and hard-wired electromechanical devices. Because of this difference, and also because of the

wide variety of uses for solid state equipment, all persons responsible for applying this equipment must satisfy themselves that

each intended application of this equipment is acceptable.

In no event will Rockwell Automation, Inc. be responsible or liable for indirect or consequential damages resulting from the use

or application of this equipment.

The examples and diagrams in this manual are included solely for illustrative purposes. Because of the many variables and

requirements associated with any particular installation, Rockwell Automation, Inc. cannot assume responsibility or liability for

actual use based on the examples and diagrams.

No patent liability is assumed by Rockwell Automation, Inc. with respect to use of information, circuits, equipment, or software

described in this manual.

Reproduction of the contents of this manual, in whole or in part, without written permission of Rockwell Automation, Inc., is

prohibited.

Throughout this manual, when necessary, we use notes to make you aware of safety considerations.

Allen-Bradley, Rockwell Automation, RSLogix 5000, Logix5000, RSLinx Classic, RSLinx Enterprise, PanelView, PLC-2, PLC-5, SLC, CompactLogix, ControlLogix, GuardLogix, FlexLogix, DriveLogix, SoftLogix,

Rockwell Software, FactoryTalk Security, and TechConnect are trademarks of Rockwell Automation, Inc.

Trademarks not belonging to Rockwell Automation are property of their respective companies.

WARNING

Identifies information about practices or circumstances that can cause an explosion in a hazardous environment,

which may lead to personal injury or death, property damage, or economic loss.

IMPORTANT

Identifies information that is critical for successful application and understanding of the product.

ATTENTION

Identifies information about practices or circumstances that can lead to personal injury or death, property damage,

or economic loss. Attentions help you identify a hazard, avoid a hazard, and recognize the consequence.

SHOCK HAZARD

Labels may be on or inside the equipment, for example, a drive or motor, to alert people that dangerous voltage may

be present.

BURN HAZARD

Labels may be on or inside the equipment, for example, a drive or motor, to alert people that surfaces may reach

dangerous temperatures.

3Publication 1756-PM004C-EN-P - October 2009 3

Summary of Changes

Introduction

The release of this document contains new information.

New Information

New information is marked by change bars in the side column, as shown to

the right.

Section Changes

Chapter 1 New information and examples for electronic keying.

Chapter 4 Procedures and descriptions for the external access and

constant tag attributes that control access to

controller tags.

4Publication 1756-PM004C-EN-P - October 2009

Summary of Changes

Notes:

5Publication 1756-PM004C-EN-P - October 2009 5

Table of Contents

Preface

Purpose of This Manual. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Chapter 1

Communicate with I/O Modules

Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Requested Packet Interval . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Communication Format. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Direct or Rack-Optimized Connection . . . . . . . . . . . . . . . . . . . . . 11

Ownership . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Electronic Keying. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Address I/O Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

Buffer I/O . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

Chapter 2

Organize Tags

Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

Tag Type. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

Data Type. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

Scope . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

Guidelines for Tags . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

Create a Tag . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33

Create an Array. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34

Configure an Array . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37

Create a User-defined Data Type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38

Guidelines for User-defined Data Types . . . . . . . . . . . . . . . . . . . . 40

Create a User-defined Data Type . . . . . . . . . . . . . . . . . . . . . . . . . . 40

Describe a User-defined Data Type . . . . . . . . . . . . . . . . . . . . . . . . . . . 42

Activate Pass-Through and Append Descriptions. . . . . . . . . . . . . 43

Paste a Pass-Through Description . . . . . . . . . . . . . . . . . . . . . . . . . 44

Address Tag Data. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45

Alias Tags . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46

Display Alias Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47

Assign an Alias . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48

Assign an Indirect Address . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49

Expressions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51

Array Subscript Out of Range. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52

Tag Documentation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53

Language Switching . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53

Chapter 3

Force I/O

Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55

Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55

Enable Forces . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56

Disable or Remove a Force. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56

Check Force Status. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57

FORCE Status Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58

GSV Instruction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58

When to Use I/O Force . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59

6Publication 1756-PM004C-EN-P - October 2009

Table of Contents

Force an Input Value . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60

Force an Output Value . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60

Add an I/O Force . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60

Remove or Disable Forces. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61

Remove an Individual Force . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62

Disable All I/O Forces . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62

Remove All I/O Forces . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62

Chapter 4

Data Access Control

Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63

External Access . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63

Configure External Access. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64

External Access Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64

Configure External Access in the New Tag Dialog Box . . . . . . . . 66

Set Up External Access in the Tag Properties Dialog Box . . . . . . 68

View and Select External Access Status

on the Tag Editor Window . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69

‘Go To’ Search Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70

External Access Availability. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71

User-defined Type Considerations . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73

Add-On Instructions External Access Considerations . . . . . . . . . . . . 74

Tag Mapping Considerations. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78

Imported Tag Behavior . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78

Constant Value Tags . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79

Configure Constant Tags . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80

Set Up a Constant in the New Tag Dialog Box . . . . . . . . . . . . . . . 80

Configure a Constant in the Tag Properties Dialog Box . . . . . . . . 81

Designate a Constant in the Tag Editor . . . . . . . . . . . . . . . . . . . . . 82

Constant Checkbox Availability . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84

Add-On Instructions Constant Value Considerations . . . . . . . . . . . . . 85

Index

Publication 1756-PM004C-EN-P - October 2009 7

Preface

Purpose of This Manual

This manual shows how to access I/O and tag data in Logix5000 controllers.

This manual is one of a set of related manuals that show common procedures

for programming and operating Logix5000 controllers.

For a complete list of common procedures manuals, refer to the

Logix 5000 Controllers Common Procedures Programming Manual,

publication 1756-PM001.

The term Logix5000 controller refers to any controller that is based on the

Logix5000 operating system, such as:

•CompactLogix controllers.

•ControlLogix controllers.

•DriveLogix controllers.

•FlexLogix controllers.

•SoftLogix5800 controllers.

8Publication 1756-PM004C-EN-P - October 2009

Preface

Notes:

9Publication 1756-PM004C-EN-P - October 2009 9

Chapter

Communicate with I/O Modules

Introduction

To communicate with an I/O module in your system, you add the module to

the I/O Configuration folder of the controller.

When you add the module, you also define a specific configuration for the

module. While the configuration options vary from module to module, these

are some common options that you typically configure:

•Requested Packet Interval

•Communication Format

•Electronic Keying

Add I/O modules here.

10 Publication 1756-PM004C-EN-P - October 2009

Chapter 1 Communicate with I/O Modules

Requested Packet Interval

The Logix5000 controller uses connections to transmit I/O data.

In Logix5000 controllers, I/O values update at a period that you configure via

the I/O configuration folder of the project. The values update asynchronous

to the execution of logic. At the specified interval, the controller updates a

value independently from the execution of logic.

•Programs within a task access input and output data directly from

controller-scoped memory.

•Logic within any task can modify controller-scoped data.

•Data and I/O values are asynchronous and can change during the

course of a task’s execution.

•An input value referenced at the beginning of a task’s execution can be

different when referenced later.

•To prevent an input value from changing during a scan, copy the value

to another tag and use the data from there (buffer the values).

Term Definition

Connection A communication link between two devices, such as between a controller and an I/O module, PanelView

terminal, or another controller.

Connections are allocations of resources that provide more reliable communications between devices than

unconnected messages. The number of connections that a single controller can have is limited.

You indirectly determine the number of connections the controller uses by configuring the controller to

communicate with other devices in the system. The following types of communication use connections:

•I/O modules

•produced and consumed tags

•certain types of Message (MSG) instructions (not all types use a connection)

Requested packet

interval (RPI) The RPI specifies the period at which data updates over a connection. For example, an input module sends data

to a controller at the RPI that you assign to the module.

•Typically, you configure an RPI in milliseconds (ms). The range is 0.2 ms (200 microseconds)…750 ms.

•If a ControlNet network connects the devices, the RPI reserves a slot in the stream of data flowing across the

ControlNet network. The timing of this slot may not coincide with the exact value of the RPI, but the control

system guarantees that the data transfers at least as often as the RPI.

ATTENTION

Make sure that data memory contains the appropriate values

throughout a task’s execution. You can duplicate or buffer data

at the beginning of the scan to provide reference values for

your logic.

Andere Handbücher für Logix5000 Series

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Allen-Bradley Controller Handbücher

Allen-Bradley

Allen-Bradley PF7000A Bedienungsanleitung

Allen-Bradley

Allen-Bradley PowerFlex 750 Series Bedienungsanleitung

Allen-Bradley

Allen-Bradley 1756-L61S ControlLogix 5561S Bedienungsanleitung

Allen-Bradley

Allen-Bradley Logix5000 Series Benutzerhandbuch

Allen-Bradley

Allen-Bradley 1756-L72EROM Bedienungsanleitung

Allen-Bradley

Allen-Bradley PowerFlex 40P Bedienungsanleitung

Allen-Bradley

Allen-Bradley iTRAK 5730 Bedienungsanleitung

Allen-Bradley

Allen-Bradley micrologix 1500 Bedienungsanleitung

Allen-Bradley

Allen-Bradley micrologix 1500 Bedienungsanleitung

Allen-Bradley

Allen-Bradley CompactLogix 1769-L23E-QB1B Bedienungsanleitung

Allen-Bradley

Allen-Bradley Guard Master MSR22LM Bedienungsanleitung

Allen-Bradley

Allen-Bradley PowerFlex 523 Bedienungsanleitung

Allen-Bradley

Allen-Bradley PowerFlex 70 Bedienungsanleitung

Allen-Bradley

Allen-Bradley SLC 500 1747-L20 Bedienungsanleitung

Allen-Bradley

Allen-Bradley 1747-AIC Bedienungsanleitung

Allen-Bradley

Allen-Bradley CompactLogix 1769-L20 Bedienungsanleitung

Allen-Bradley

Allen-Bradley CompactLogix 5480 Bedienungsanleitung

Allen-Bradley

Allen-Bradley 198E-C2S4 Bedienungsanleitung

Allen-Bradley

Allen-Bradley PowerFlex 4 Bedienungsanleitung

Allen-Bradley

Allen-Bradley ControlLogix 1756-HYD02 Bedienungsanleitung

Allen-Bradley

Allen-Bradley PowerFlex 750 Series Bedienungsanleitung

Allen-Bradley

Allen-Bradley powerflex 700 Bedienungsanleitung

Allen-Bradley

Allen-Bradley PowerFlex 70 Bedienungsanleitung

Allen-Bradley

Allen-Bradley PowerFlex 400 Gebrauchsanweisung

Beliebte Controller Handbücher anderer Marken

Digiplex

Digiplex DGP-848 Betriebsanleitung

YASKAWA

YASKAWA SGM series Bedienungsanleitung

Sinope

Sinope Calypso RM3500ZB Bedienungsanleitung

Isimet

Isimet DLA Series Style 2 Installationshandbuch

LSIS

LSIS sv-ip5a Bedienungsanleitung

Rockwell Automation

Rockwell Automation 1769-L31 Bedienungsanleitung

Airflow

Airflow Uno hab Bedienungsanleitung

ABB

ABB ACS580-01 drives Bedienungsanleitung

Panasonic

Panasonic GM1 Series Bedienungsanleitung

Emerson

Emerson SW93 Bedienungsanleitung

AutoAqua

AutoAqua Smart ATO micro SATO-120P Bedienungsanleitung

Panasonic

Panasonic FP? Positioning Unit RTEX Bedienungsanleitung

Samson

Samson Type 5824 Service-Handbuch

Alpha IP

Alpha IP MIOB 21001 Bedienungsanleitung

Siemens

Siemens OpenAir GMA 1 Series Bedienungsanleitung

Surecom

Surecom SR-629 Bedienungsanleitung

Fishman

Fishman TriplePlay Bedienungsanleitung

Regulus

Regulus SRS1 T Bedienungsanleitung