Alpine EX-10 Bedienungsanleitung

Apple, the Apple logo, iPod and iTunes are registered trademarks of Apple Inc. The Bluetooth logo is owned

by the Bluetooth SIG, Inc. and any use of such marks by Alpine Electronics, Inc. is under license. Product

information listed in this guide is based upon current information at the time of printing, but cannot be guar-

anteed. All designs, features, and speciﬁcations are subject to change without notice. For updated product

information, please visit www.alpine-usa.com.

How to learn more and get support.

If you want more detailed information on operating or installing the eX-10,

you can download the owner’s manual and get additional help at

If you would like to speak to Alpine customer support concerning

eX-10 operation or installation,

English

Start Here.

Here’s how to install, set up, and use your eX-10

http://www.alpine-usa.com/US-en/support

please call 1-800-ALPINE-1.

Installation Options

Here’s how to install your new eX-10 in your vehicle.

Follow the instructions in this manual to perform a simple, do-it-yourself installation.

Option #1: Install it yourself.

Go to www.alpine-usa.com, click “Support”, then click “Locate a Dealer” to ﬁnd

an authorized Alpine dealer in your area to install your new eX-10. Alpine dealers

have many options to enhance the audio and cosmetic integration of the eX-10 in

your vehicle.*

Option #2: Have it professionally installed.

*Note: Professional installation and other hardware may require an additional cost.

Display unit Display mount Display cable Cigarette Lighter

Adapter

Antenna Bluetooth

microphone

Power supply iPod cable Remote control Power Cable Accessory kit

(remote control battery, micro-

phone clip, cable clips, etc.)

Here’s what’s in the box:

4 5

Do-It-Yourself Installation

Here’s how to install your new eX-10 in your vehicle.

Push the display into the display mounting bracket

until you hear a “click”.

Step 1: Mount the display

*Note: Mount the eX-10 display in a location where it will not block your view of the road.

Attach the Bluetooth microphone to the micro-

phone mounting clip by pushing the microphone

onto the clip as shown.

Clip the microphone mount to a spot in your car

no more than 24” from your mouth.

Good locations include the sun visor, the top of

the A-pillar, and the edge of your roof-mounted

center console (if equipped)*.

*Note: Do not install the microphone in any position where it could interfere with the functionality of Airbags in

your vehicle. Consult your local car dealer for more information.

Step 2: Mount the Bluetooth Microphone

Do-It-Yourself Installation

Apply the supplied double-sided

tape to the bottom of the display,

clean the desired spot on your

dash* with the supplied alcohol

pad, then ﬁrmly stick the display

to the dash.

6 7

Do-It-Yourself Installation

Plug the display cable into

the back of the display,

and use the supplied cable

clamps to route the cable to

the power supply location.

Take care to route the cable

away from moving parts

such as shifters, pedals, and

steering wheels.

Screw the yellow end of

the power cable into the

eX-10’s power supply,

and screw the black end

into the cigarette lighter

adapter.

Step 3: Connect the wiring

Now the cigarette lighter

adapter and the power

supply are ready to be

installed.

Plug the cigarette lighter

adapter into your cigarette

lighter plug.

Plug the iPod cable into the

port marked “iPod” on the

power supply.

Plug the square end of the

monitor cable into the port

marked “MONITOR” on the

power supply.

Do-It-Yourself Installation

8 9

Do-It-Yourself Installation

Plug the antenna into the port

marked “ANTENNA” on the

power supply.

Plug the Bluetooth micro-

phone into the port marked

“MICROPHONE” on the

power supply.

Place the power supply into a

hidden location in your car, like

inside the center console or the

glove box. Use the supplied hook-

and-loop fastening tape to secure it.

Step 4: Plug in your iPod

Plug your iPod into the dock connector.

Place the iPod in a convenient location. In most

applications, it can be placed next to the power

supply. The eX-10 controls and charges your

iPod, so no need to mount it where you have

access to the iPod’s controls.

The installation is complete! Turn on your car’s

ignition and power up the eX-10.

Do-It-Yourself Installation

Next, let's get the eX-10 set up to work correctly in your car

10 11

Set up your eX-10

Here’s how to get your eX-10 working properly in your car.

Push the “SETUP” button, then use the

button to scroll down to “General”.

Tap “ENTER” twice, then select your language

using the and buttons. Tap “ENTER”

to select.

You’re still in “SETUP” mode, so tap the

button three times until you get to “Output Mode”.

Tap “ENTER”, and use the button to select

“Wire Transmitter”. Press

“

ENTER

”

to select the

“Wire Transmitter” mode.

Now, tap the button to get back to the

“SETUP” menu.

Step 1: Select your language and set the output mode

Set up your eX-10

The eX-10 broadcasts audio to your car stereo

just like an FM radio station.

Tune your car radio to an FM frequency where

there is no radio reception (for example, 88.3MHz).

Save a few of these blank stations in your car

radio’s preset memories for use with the eX-10’s

FM transmitter.

*Note: If one of your selected frequencies encounters a strong FM signal while driving, interference may be

heard while listening to iPod or Bluetooth. Changing presets to match frequencies on both your car stereo

and on your eX-10 can solve this problem quickly.

Step 2: Set up your car’s radio to work with the eX-10

Select “Transmitter” from the eX-10’s “SETUP”

menu, then press and hold “ENTER” for two

seconds. Use the and buttons to

select the same frequency as shown on your

car radio display. Press “ENTER” to set this

frequency as a preset in the eX-10. You can

set up to four different frequencies using this

method*. Your car’s radio and the eX-10 must

be tuned to the same frequency to hear audio

output.

12 13

Set up your eX-10

Tap the button, and press “ENTER” to select

“Bluetooth”. Press “ENTER” again to select

“Pairing Mode”, and a four-digit pass code will be

displayed on the eX-10.

The eX-10 is now discoverable and ready to

connect to your Bluetooth phone.

Turn on Bluetooth in your phone’s menu. Your phone will

ask for a four-digit code to connect with the eX-10, so

enter the code shown on the eX-10’s screen.

You will now see a “Connected” message on the eX-10's

display to let you know that you’ve successfully paired

your phone with the eX-10*.

*Note: Turn “Auto Connect” on in the Bluetooth setup menu if you want your phone to automatically connect

to your eX-10 whenever you turn on your car’s ignition.

Step 3: Set up your Bluetooth phone to work with your eX-10

Now we’re all set up, so let’s use the eX-10

Use your eX-10

Here’s the basics on how to use your eX-10.

Use the button to exit the “SETUP” menu.

Press “SOURCE” to select “iPod”.

Press the “ENTER” button, then use the and

buttons to search by artist, album, song,

etc. Tap “ENTER” to choose any search method,

using the and buttons to select a song.

Pressing “ENTER” will begin song playback.

With the song playing, you should now see

the iPod’s album art displayed on the eX-10

screen.* Press the “VIEW” button to scroll

between the three different display modes.

You can also choose the display back-

ground that best matches your dash by

selecting “DISPLAY” in the “SETUP” menu,

then “BGV Select”.

Step 1: Playing songs from your iPod

*Note: Album Art must be stored on your iPod in order to be displayed on the eX-10.

14 15

Use your eX-10

Press the button, and use the and

buttons to select “Phonebook”. Press “ENTER”,

then use the and buttons to ﬁnd the

desired contact in your phone book. Press

again to dial the number. You may also select

numbers from the dialed, received, or missed

calls lists using this method.*

You will now hear the phone dialing through your

car’s stereo system. To hang up, press

When a call comes in, simply press to

answer it.

To hang up, press

You can also select “Auto Answer” under

“Bluetooth” in the “SETUP” menu if you want

the eX-10 to automatically answer any call that

comes in.

*Note: All features are not enabled on all phones. Check with your phone service provider.

Step 2: Making and receiving phone calls

Use your eX-10

If your phone is Bluetooth audio enabled, you can play

songs from your phone through the eX-10.

Press “SOURCE” to select “Bluetooth Audio” mode, then

use , , and to control the audio tracks.

Step 3: Listening to songs stored on your phone

Andere Handbücher für eX-10

Inhaltsverzeichnis

Andere Alpine Autozubehör Handbücher

Alpine

Alpine HCE-C117D Bedienungsanleitung

Alpine

Alpine RSE-K100TG Bedienungsanleitung

Alpine

Alpine KTX-PRS8-S Bedienungsanleitung

Alpine

Alpine i509-WRA-JK Bedienungsanleitung

Alpine

Alpine RSE-K100TN Bedienungsanleitung

Alpine

Alpine eX-10 Bedienungsanleitung

Alpine

Alpine KTX-FPU8 Bedienungsanleitung

Alpine

Alpine DME-R1200 Bedienungsanleitung

Alpine

Alpine RUE-BK01A Bedienungsanleitung

Alpine

Alpine KTX-RV48-S Bedienungsanleitung

Alpine

Alpine INE-W928R Bedienungsanleitung

Alpine

Alpine eX-10 Bedienungsanleitung

Alpine

Alpine NVE-N077PS Bedienungsanleitung

Alpine

Alpine HCE-C105 - Rear View Camera System Bedienungsanleitung

Alpine

Alpine KCX-C2600B Bedienungsanleitung

Alpine

Alpine i509-WRA-JL Bedienungsanleitung

Alpine

Alpine KTX-SNA-S Bedienungsanleitung

Alpine

Alpine KTX-WXE-CA8 Bedienungsanleitung

Alpine

Alpine ACTIVE VIEW HCE-C305R Bedienungsanleitung

Alpine

Alpine HCE-C1100 Bedienungsanleitung

Alpine

Alpine KTX-WXE-M38 Bedienungsanleitung

Alpine

Alpine ACTIVE VIEW HCE-C305R Bedienungsanleitung

Alpine

Alpine HCE-C104 Bedienungsanleitung

Alpine

Alpine PSS-21WRA Bedienungsanleitung

Beliebte Autozubehör Handbücher anderer Marken

James Baroud

James Baroud Odyssey Bedienungsanleitung

Motorola

Motorola i50sx Bedienungsanleitung

Yakima

Yakima 9MM STANDARD BIKE MOUNT Bedienungsanleitung

Feniex

Feniex T3 Bedienungsanleitung

Renault

Renault 77 11 423 180 Bedienungsanleitung

Kia

Kia E8300-4D000 Bedienungsanleitung

Brink

Brink 756843 Bedienungsanleitung

Whispbar

Whispbar K085W Bedienungsanleitung

v.link

v.link CI-VL2-PC-HSD Bedienungsanleitung

Viking

Viking Stack-Rack Kurzanleitung zur Einrichtung

Aries

Aries 203015 Bedienungsanleitung

Choetech

Choetech AT0005 Bedienungsanleitung

ZZ2

ZZ2 ZZAIR-PRO Bedienungsanleitung

Holman

Holman 4A80L Bedienungsanleitung

Thule

Thule 2075 Bedienungsanleitung

Motorola

Motorola T325 Bedienungsanleitung

TAUBENREUTHER

TAUBENREUTHER 16-3950 Installationsanleitung

DV8

DV8 FBJL-02 Bedienungsanleitung