Alpine X209-WRA-OR Bedienungsanleitung

Jeep Wrangler

WRANGLER 1/22

Jeep Wrangler

X209-WRA-OR

X209-WRA-ORSXM

9” Restyle In-Dash System

Installation Manual

Model: Wrangler

Model Year: 2011-2018

Note

Design and speciﬁcations are subject to change without notice for improvement.

To Ensure Safe Use, Always Follow These Precautions

The installation of this product requires specialized skills and experience. We recommend that you have the

product installed by an Alpine authorized dealer.

Before you use this product, be sure to carefully read this installation manual and the separate user's manual

so that you can use the product correctly. Alpine Electronics bears no responsibility for problems that arise as

a result of failure to follow the instructions in the manuals.

This manual includes a number of symbols that are intended to help you use the product safely, to prevent

harm to you and others, and to protect against damage to property. These symbols and their meanings are

listed below. Make sure you fully understand these symbols before you begin reading the main text.

Explanations of Injury and Damage That May Result from Incorrect Use

Warning Ignoring the content marked by this indication and using the product incorrectly is

expected to lead to death or serious injury.

Caution Ignoring the content marked by this indication and using the product incorrectly is only

expected to lead to injury or property damage.

Jeep Model Year

Wrangler 2011 - 2018

* The speciﬁed vehicles have been tested and have met compatibility specs at the time of testing. Compatibility is

not guaranteed if the manufacturer has made production changes to the listed vehicles above.

Warning: Before you begin wiring, remove the ground wire from the negative

terminal of the battery. Failing to do so can lead to electric shock, injury or damage

to equipment.

Introduction

Congratulations on purchasing the X209-WRA-OR. This installation manual is designed to take you through the

step-by-step installation of X209-WRA-OR into a 2011-2018 Jeep Wrangler. Please familiarize yourself with the

owners manual and if you still have additional questions please call 1-800-TECH-101.

Jeep Wrangler

WRANGLER 2/22

Types of Precautions

Forbidden

Indicates actions that are forbidden

(must not be performed)

Mandatory

Indicates actions that are

mandatory (must be performed)

Forbidden

Indicates that disassembly is

forbidden.

Marks content that should receive

your full attention.

Warning

Do not disassemble or modify the product. Doing so could lead to an accident, fire,

or electric shock.

Forbidden

Store screws and other small objects where small children cannot reach them. If one of these

small objects is swallowed, consult with a doctor immediately.

When replacing fuses, be sure to use fuses with the specified current rating. Failing to do so could

lead to an accident or fire.

Forbidden

Mandatory

Only connect the product to a 12 VDC negative ground car. Failing to do so could lead to

an accident or fire.

Mandatory

Before you begin wiring, remove the ground wire from the negative terminal of the battery.

Failing to do so could lead to electric shock or injury.

Do not cut the insulation on a cord and take power from another device. Doing so could

lead to fire or electric shock.

Forbidden

Do not install the product in a location where it will obstruct the driver’s forward view;

interfere with the operation of the steering wheel, gearshift, or the like; or pose a

threat to passengers. Doing so could lead to an accident or injury.

Forbidden

When making a hole in the vehicle body, be careful to avoid damaging pipes, the fuel tank,

electrical wiring, and the like. This kind of damage could lead to an accident or fire.

Jeep Wrangler

WRANGLER 3/22

When installing and grounding the product, do not use any of the bolts or nuts of the

steering wheel, brakes, fuel tank, or the like. Doing so could make the brakes stop working

or lead to fire.

Forbidden

Do not install the product near the passenger-side airbag. Doing so could interfere with the

operation of the airbag and lead to an accident or injury.

Forbidden

Bundle cords so that they don’t interfere with driving. Wrapping cords around the steering

wheel, gearshift, brake pedal, or the like, could lead to an accident or damage equipment.

Caution

Connect the product properly according to the instructions. Failing to do so could lead

to fire or an accident.

Forbidden

Do not sandwich cords between the seat railing or allow them to touch protrusions.

Resulting breaks or shorts could lead to electric shock or fire.

Do not block vents or heat sinks. Doing so could lead to fire or damage equipment.

Use the accessories according to the instructions, and attach them securely.

Failing to do so could lead to an accident or damage equipment.

Forbidden

Do not install the product where it may be exposed to water or in a place with high levels

of humidity or dust. Doing so could lead to fire or damage equipment.

Forbidden

The installation and wiring of this product requires specialized skills and experience.

Have the product installed by an Alpine authorized dealer.

Jeep Wrangler

WRANGLER 4/22

Tools Required

Panel Removing Tool 7mm Sockets #2 Phillips Screwdriver

10mm Sockets Extension Ratchet

Wire Cutters Air Saw

Accessory List

Installation Kit Parts (G-KTX-X209D-WRA)

X209-WRA-OR Radio Dash

Bezel

Key Harness Side Mounting Brackets

Microphone Rear Support Bracket

Jeep Wrangler

WRANGLER 5/22

Accessory List

Head Unit Box Parts (X209D OR)

X209D OR DVD/Display Unit X209D OR Source Unit USB Extension Cable

AUX/Pre Out Harness GPS Antenna Documents

Alpine

Registration Card

QRG Navigation

OM QR Card

Direct Camera Adapter Display Cable

HDMI Cable

Source Unit HDMI Bracket

DVD/Display HDMI Bracket

(8) 8mm Screws

iDatalink Maestro Box Parts (ALP-MRR3/ALP-HRN-WRA2)

Maestro Flashing Cable Antenna Adapter iDatalink Maestro Module

Main Harness SAT Radio Antenna Adapter OEM USB Adapter

Jeep Wrangler

WRANGLER 6/22

Programming the iDatalink Maestro Module

1INSTALL THE WEBLINK PLUG-IN

Go to:

idatalinkmaestro.com/plugin and follow the installation steps. The

Maestro module must be programmed specically for each vehicle

and radio. Take care to enter the correct vehicle information,

factory options, head unit model, and head unit serial number.

The head units serial number is an alphanumeric value which is

found on the head units label, underneath the bar code.

Review the System Requirements before installing.

If the plugin is already installed, the caution, “The plugin is already

installed” appears. Please skip to step 2.

3 CONNECT YOUR MAESTRO MODULE

Use your Maestro module to connect to your PC.

5 PROGRAM YOUR MODULE

Follow the programming steps for your vehicle.

2REGISTER A WEBLINK ACCOUNT

Go to:

idatalinkmaestro.com/register and complete the registration process.

A conrmation email will be sent to you requiring validation.

For existing customers, click log in.

4 LOG INTO WEBLINK

Go to:

idatalinkmaestro.com/login.

Enter your username and password, then click OK.

6 Once Programing is complete “FLASHING

COMPLETED!” will be displayed.

Proceed to the next page to complete installation.

NOTE: If serial number is invalid, Call ADS at

1-866-427-2999 with the serial number.

Jeep Wrangler

WRANGLER 7/22

Component Locations

IMPORTANT: Follow the recommended component location shown below. Failure to do so, will result in poor

GPS performance.

Jeep

Jeep SINCE 1941

Add-on Microphone

iDatalink Maestro Module

SAT-Radio Tuner

(Sold Separately)

GPS Antenna Installation

IMPORTANT: Follow the GPS antenna installation procedure shown below. Failure to do so will result in poor

GPS performance for CarPlay, Android Auto, and off-road navigation.

Wire Hook

GPS Antenna

Peel the plastic layer

off from the double

side tape of the GPS

antenna and place the

GPS antenna on top of

the driver side roof

frame. T20 Torx to

remove the visor.

Jeep Wrangler

WRANGLER 8/22

Factory Unit Disassembly Process

1Remove the rubber cover from the top center

storage area and extract (1) 7mm screw.

3Remove the window switch pod using a panel

removing tool and extract (1) 7mm screw.

5Extract (4) 7 mm screws and remove the factory

radio.

2Remove the knee cover panel and extract (2) 7mm

screws located to the right and left sides of the

steering wheel column.

Right side of

steering wheel

column.

Left side of

steering wheel

column.

4Remove the dash panel.

6Extract (2) 7 mm screws from the factory radio

bracket and remove it.

Jeep Wrangler

WRANGLER 9/22

Installation Instructions

2Remove the vents from the radio section on the

OEM dash panel by pressing down on the lock tab

and turning right. Mount vents on to the X209-WRA-

OR bezel.

Lock tab

Rear view

4Mount the microphone as illustrated and run the

cable to the radio cavity.

6Attach the Maestro to the main harness.

1The factory dash panel needs to be trimmed to

allow the new X209-WRA-OR bezel to ﬁt into place.

Remove the highlighted area by cutting along the

dashed line.

3Use a cutting tool to trim the highlighted area

shown below.

5Plug the OBDII connector on to the OBDII port

below the driver side dash and run the extension to

the radio cavity.

Jeep Wrangler

WRANGLER 10/22

Installation Instructions

2Position X209D OR source unit on top of X209

DVD/Display unit as shown, and attach the

mounting brackets using the provided (8) 8mm

screws and rear support rubber cap screw.

4Route the USB extension cable to the glove box,

connect the main harness and other adapters to the

factory harness and secure them.

6Connect the radio bezel and snap it into place.

A/C

1Attach the modiﬁed panel using the factory screws.

3Attach the rear support bracket using (2) 7mm

factory screws.

5Route the key harness through the top-left side of

the X209D OR source unit. Mount the X209D OR

source unit using (4) 7mm factory screws.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Alpine Andere Handbücher

Alpine

Alpine 463 Beilage

Alpine

Alpine 462 Beilage

Beliebte Andere Handbücher anderer Marken

GO Industries

GO Industries 38017 Bedienungsanleitung

Cissell

Cissell 30LBCMAN2 Bedienungsanleitung

RIDGID

RIDGID K-60SP Bedienungsanleitung

Gage Bilt

Gage Bilt GB751SH-5 Bedienungsanleitung

OVE

OVE SIERRA 60 Bedienungsanleitung

ReelCraft

ReelCraft 7800 OLB21 Bedienungsanleitung

Body Armor 4x4

Body Armor 4x4 ECO-SERIES Bedienungsanleitung

ROBLIN

ROBLIN DROP Benutzerhandbuch

EMG

EMG EMG-ACB BARREL Service-Handbuch

MiniSolar

MiniSolar MT-150 Bedienungsanleitung

Parkside

Parkside PSZ 250 B2 Bedienungsanleitung

ABB

ABB REM 610 Produkthandbuch

Parkside

Parkside 55992 Betriebsanleitung

Skyjacker

Skyjacker F250 Bedienungsanleitung

IBM

IBM IBM SYSTEM Z Installationsanleitung

Grech Motors

Grech Motors G28 Bedienungsanleitung

NOVAK

NOVAK BATTERY CARE SHEET Leitfaden

Telemotive

Telemotive blue PiraT Mini Benutzerhandbuch