ReelCraft 7800 OLB21 Bedienungsanleitung

1. Do not use reel at higher pressures or temperatures than listed on

the back of this bulletin.

2. Remove all spring tension before beginning dissassembly process.

SAFETY

INSTALLATION: A flexible hose connection must be used between the hose reel inlet and the source of supply to prevent possible

misalignment and binding.

LUBRICATION: Hose reel spring and bearings are factory lubricated and require no further lubrication.

REPLACING HOSE: 1. Wind spool flange clockwise-facing swivel-until spring is tight.

2. Back off three turns and latch.

3. Insert hose through roller guide.

4. Connect hose fitting to swivel joint and secure hose with clamps.

ADJUSTMENTS: To adjust spring tension, add or remove wraps of hose from the spool, one wrap at a time until desired tension is

obtained.

REPAIRS: Extensive repairs should be performed only by an authorized serviceman or factory to avoid damage which may

void your warranty. Remove all spring tension before beginning disassembly process.

7800 OLB21

Operating Instructions

Series 7000 Spring Driven Hose Reels

Clean Air Hose Reel Model Number:

Reelcraft Industries, Inc. • 2842 E Business Hwy 30, Columbia City, IN 46725

Ph: 800-444-3134 / 260-248-8188 • Fax: 800-444-4587 / 260-248-2605

Customer Service: 855-634-9109 • [email protected] • www.reelcraft.com

Form# 951-698 Rev: 4/2017

MOUNTING: The hose reel is equipped with a universal mounting bracket so that it can be mounted on the floor, wall or ceiling;

whichever place is convenient. The hose guide arm can be moved to the position desired by removing the nuts fas-

tening the guide bracket to the reel base. Shift the guide arm bracket so the hose comes off the reel at the desired

position and replace the nuts. A 180° wall mount bracket (600626) or 340° pivot base (600608) are also available

consult manufacturer.

Dimensions

A20 1/4”

B19 3/4”

C7 13/16”

D3 7/8”

E 7”

Series 7000 Spring Driven Hose Reels

Page 2 www.reelcraft.com

Item # Part # # Req. Description Item # Part # # Req. Description Item # Part # # Req. Description

1 261337 1 Adapter Union 9 261370 1 Main shaft** 16 S280-8 1 1/2-20 Hex Nut

2 600375-4B 1 Swivel Assembly** 9 S602683-B 1 Main shaft 17 S260067 1 Latch Spring

2 602691-4B 1 Swivel Assembly 10 300007 2 1¼” Snap Ring 19 S393-2 1 10-32 Shoulder Screw

3 S260011-40 1 Sheave Assembly 11 600016-40 1 Base Assembly 20 S600018 1 Latch Pawl Assembly

4 S260037 1 Drive Spring Assembly 12 S35-84 1 1/2-13 Set Screw 21 S76-106 1 3/8-24 Jam Nut

5 S600621 1 Spring Arbor Assembly 13 600017-40 1 Guide Arm w/rollers 22 S260031 1 Spring Case Stud

6 S260069 1 Gasket 14 300107 4 5/16-18 Lock Nut 23 3-117440 1 U-bolt

7 S260074-40 1 Spring Case Assembly 15 S82-15 7 10-32 x 3/8” Nyloc Nut 24 261650-1 2 1/4-20 x 3/8” Lock Nut

715 910

12 13

Maximum operating pressure excluding hose 500 PSI

Maximum operating temperature 210 °F

1. Clean air hose reels do not include filter, regulator, gauge,

hose, valve or respirator.

2. Reel swivel union is 3/4-16 UNF male to fit MSA #455022

hose or equivalent. (1-800-MSA-2222)

WARNING: Only use hose supplied with mask.

Substitution may result in injury or death.

Plant Air

System

Installation Reference Drawing

Hose Reel

(from Reelcraft)

Inlet: 1/2” NPTF (F)

Outlet: 3/4”-16

UNF (M)

Outlet hose, valve, and

respirator assembly (not

included)

Outlet

Inlet

Filter, regulator,

gauge assembly, and inlet

hose (not included)

When changing guide arm positions, the U-bolt must be placed

in the proper location as instructed above. The reel can “latch

out” during use if this instruction is not adhered to.

**Prior to August 2016

See online tech bulletin for more information

Andere ReelCraft Andere Handbücher

ReelCraft

ReelCraft E9200 OLP Bedienungsanleitung

ReelCraft

ReelCraft BA36106 LT Bedienungsanleitung

ReelCraft

ReelCraft D8400 OHP Bedienungsanleitung

ReelCraft

ReelCraft L CA37122 L Bedienungsanleitung

ReelCraft

ReelCraft TW5400 OLP Bedienungsanleitung

ReelCraft

ReelCraft WC7000 Bedienungsanleitung

ReelCraft

ReelCraft E9000 Series Bedienungsanleitung

ReelCraft

ReelCraft TH86050 OMP Bedienungsanleitung

ReelCraft

ReelCraft Series WC80000 Bedienungsanleitung

ReelCraft

ReelCraft GC7535 OLP Bedienungsanleitung

ReelCraft

ReelCraft TW Series Bedienungsanleitung

ReelCraft

ReelCraft TW7000 Series Bedienungsanleitung

ReelCraft

ReelCraft 5650 OLPSMR Bedienungsanleitung

ReelCraft

ReelCraft E9000 Series Bedienungsanleitung

ReelCraft

ReelCraft A5835 OLBSW23 Bedienungsanleitung

ReelCraft

ReelCraft TH5425 OMP Bedienungsanleitung

ReelCraft

ReelCraft A5850 OLPSMR Bedienungsanleitung

ReelCraft

ReelCraft 5400 OHP Bedienungsanleitung

ReelCraft

ReelCraft 5635 OLSSW5 Bedienungsanleitung

ReelCraft

ReelCraft SD10000 Series Bedienungsanleitung

ReelCraft

ReelCraft FF9500 OLPBW118 Bedienungsanleitung

ReelCraft

ReelCraft L 4000 Series Bedienungsanleitung

ReelCraft

ReelCraft 5635 OLPSW5 Bedienungsanleitung

ReelCraft

ReelCraft A5800 OMP Bedienungsanleitung

Beliebte Andere Handbücher anderer Marken

GO Industries

GO Industries 38017 Bedienungsanleitung

Cissell

Cissell 30LBCMAN2 Bedienungsanleitung

RIDGID

RIDGID K-60SP Bedienungsanleitung

Gage Bilt

Gage Bilt GB751SH-5 Bedienungsanleitung

OVE

OVE SIERRA 60 Bedienungsanleitung

Body Armor 4x4

Body Armor 4x4 ECO-SERIES Bedienungsanleitung

ROBLIN

ROBLIN DROP Benutzerhandbuch

EMG

EMG EMG-ACB BARREL Service-Handbuch

MiniSolar

MiniSolar MT-150 Bedienungsanleitung

Parkside

Parkside PSZ 250 B2 Bedienungsanleitung

ABB

ABB REM 610 Produkthandbuch

Parkside

Parkside 55992 Betriebsanleitung

Skyjacker

Skyjacker F250 Bedienungsanleitung

IBM

IBM IBM SYSTEM Z Installationsanleitung

Grech Motors

Grech Motors G28 Bedienungsanleitung

NOVAK

NOVAK BATTERY CARE SHEET Leitfaden

Telemotive

Telemotive blue PiraT Mini Benutzerhandbuch

Zanussi

Zanussi ZDC8203W Bedienungsanleitung