American DJ UV Panel HP Bedienungsanleitung

UV Panel HP™ Introduction

Introduction: Thank you for purchasing the UV Panel HP™ by Amer-

ican DJ®. The UV Panel HP™ is ready to be plugged in right out of the

box and does not require any type of controller to operate. The UV

Panel HP™ has been designed to function as a ultra-violet wash. The

reflectors produce a wide ultra-violet wash on walls or other surfaces.

This unit was designed to fit the needs of theatrical groups and arenas

that need to wash a large area.

Customer Support: American DJ® provides a toll free customer

support line, to provide set up help and to answer any question should

you encounter problems during your set up or initial operation. You

may also visit us on the web at www.americandj.com for any com-

ments or suggestions. For service related issue please contact Ameri-

can DJ®. Service Hours are Monday through Friday 9:00 a.m. to 5:00

p.m. Pacific Standard Time.

Voice: (800) 322-6337

Fax: (323) 582-2610

E-mail: [email protected]

To purchase parts online visit http://parts.americandj.com

Unpacking: Every UV Panel HP™ has been thoroughly tested and

has been shipped in perfect operating condition. Carefully check the

shipping carton for damage that may have occurred during shipping.

If the carton appears to be damaged, carefully inspect your unit for

damage and be sure all accessories necessary to operate the unit

have arrived intact. In the event damage has been found or parts are

missing, please contact our toll free customer support number for fur-

ther instructions. Please do not return this unit to your dealer without

first contacting customer support at the number listed below.

Warning! To prevent or reduce the risk of electrical shock or fire, do

not expose this unit to rain or moisture.

Caution! There are no user serviceable parts inside this unit. Do not

attempt any repairs yourself, doing so will void your manufactures

warranty. In the unlikely event your unit may require service please

contact your nearest American DJ® dealer.

PLEASE recycle the shipping carton when ever possible.

©American DJ® - www.americandj.com - UV Panel HP™ Instruction Manual Page 2

User Instructions

American DJ®

4295 Charter Street

Los Angeles, CA. 90058

www.americandj.com

11/04

American DJ®

©American DJ® - www.americandj.com - UV Panel HP™ Instruction Manual Page 3

UV Panel HP™ Precautions

• 4 Bright 40 Watt Ultra-Violet Lamps For a Combined Total of a 160

Watts

• Lamp (LL-UVP40)

• Easy Lamp Replacement

• Built-In Hanging Yoke

• Protective Plexiglass Cover

UV Panel HP™ Features

UV Panel HP™ Warranty Registration

The UV Panel HP™ carries a one year (365 days) limited warranty.

Please fill out the enclosed warranty card to validate your purchase.

All returned service items whether under warranty or not, must be

freight pre-paid and accompany a return authorization (R.A.) num-

ber. The R.A. number must be clearly written on the outside of the

return package. A brief description of the problem as well as the R.A.

number must also be written down on a piece of paper included in

the shipping carton. If the unit is under warranty, you must provide a

copy of your proof of purchase invoice. You may obtain a R.A. num-

ber by contacting our customer support team on our toll free custom-

er support number. All packages returned to the service department

not displaying a R.A. number on the outside of the package will be

returned to the shipper.

• Keep the outside of this device dry at all times. Do not spill water or

other liquids into or on to your unit. To prevent ﬁre or shock hazard,

do not expose this product to rain or moisture.

• This unit is designed for interior use only. Do not use this unit out

doors. Use of product outdoors will void the warranty.

• Be sure that the local power outlet match that of the required volt-

age for your unit.

• Never attempt to operate this unit if the power cord becomes frayed

or broken.

• Never attempt to operate this unit, if it becomes damaged in any

way.

• Do not attempt to remove or break off the ground prong from the

electrical cord. This prong is used to reduce the risk of electrical

shock and ﬁre in the rare case of an internal short.

©American DJ® - www.americandj.com - UV Panel HP™ Instruction Manual Page 4

UV Panel HP™ Operation

Power Supply: Before plugging your unit in, be sure the source

voltage in your area matches the required voltage for your American

DJ® UV Panel HP™ before attempting operation.

General Operation: This fixture is designed to operate as a stand

alone unit. It has been tested and the lamp has been installed at the

factory there is no assembly necessary. The UV Panel HP™ is ready

to be plugged in, out of the box. “Flip” the power switch to the “on”

position and the lamp will immediately begin to glow.

Please carefully read and understand the instructions in this manual

thoroughly before attempting to operate this unit. These instructions

contain important safety information regarding the use and mainte-

nance of this unit. Please keep this manual with the unit, for future

reference.

UV Panel HP™ General Instructions

Fixture Cleaning: Due to fog residue, smoke, and dust cleaning the

internal and external lenses should be carried out periodically to opti-

mize light output. Cleaning frequency depends on the environment

in which the fixture operates (I.e. smoke, fog residue, dust, dew).

In heavy use we recommend cleaning on a monthly basis. Periodic

cleaning will ensure longevity, and crisp beam output.

1. Use normal glass cleaner and a soft cloth to wipe down the out-

side casing.

2. Use a soft brush to clean out the air vents

3. Clean the external optics with glass cleaner and a soft cloth every

20 days.

4. Clean the internal optics with glass cleaner and a soft cloth every

30-60 days.

5. Always be sure to dry all parts completely before plugging the unit

back in.

UV Panel HP™ Cleaning

©American DJ® - www.americandj.com - UV Panel HP™ Instruction Manual Page 6

UV Panel HP™ Lamp and Fuse Replacement

©American DJ® - www.americandj.com - UV Panel HP™ Instruction Manual Page 5

Caution: Always replace with the exact same type lamp and fuse,

unless otherwise specified by an authorized American DJ® techni-

cian. Replace with anything other than the specified part can damage

your unit and will void your manufactures warranty.

Warning: If you continue to blow either the lamp or fuse after either

one has already been replaced, STOP using the unit. Contact cus-

tomer support for further instructions, you may have to return the unit

for servicing. Continuing to use the unit may cause serious damage.

Fuse Replacement: The fuse is located at the top rear of the unit next

to the power cord and power switch. Occasionally this fuse may blow

when the unit becomes to hot. To replace the fuse; disconnect the unit

from the main power supply and unscrew the fuse holder from the fuse

holder housing. Remove the old fuse and discard it, replace the fuse

with an exact same type. Insert the new fuse into it’s holder and return

the holder to the fuse housing.

Lamp Replacement: Caution! Never open the unit when in use.

Always disconnect the main power and allow the fixture ample time

to cool before attempting to replace the lamp. Lamp replacement has

been made simple by incorporating a remove tray that is retained by

a single thumb screws. Again, please remember to always replace

with the exact same type lamp. Please see the pictures on next page

for reference in this process.

1. Be sure to follow the proper procedures when handling UV lamps.

2. Locate the thumb screw that secures the plexi-glass lid. Remove

the thumb screw to access the lamps (Figure 1).

3. Once the screw has been removed, pull down the lid to expose

the lamps (Figure 2).

4. Remove the lamp by grabing the top of the lamp (Figures 3 and

4) pulling it gently down and out of its socket (Figure 5). The lamp

should then be pulled forward (towards you) and up (Figures 6, 7,

and 8).

5. Relplace the lamp with the same type of lamp. The lamp must

be inserted through the plastic holder first, and then into the

socket. Please, be very careful when doing this.

6. Close the lid and screw the thumb screw back into place to lock

the lid.

UV Panel HP™ Lamp and Fuse Replacement

Figure 1 Figure 2

Figure 7

Figure 4

Figure 8Figure 6

Figure 5Figure 3

©American DJ® - www.americandj.com - UV Panel HP™ Instruction Manual Page 7

Model: UV Panel HP™

Voltage*: 120v~60Hz or 220v~50/60Hz

Lamps: 4 x LL-UVP40

Fuse: 5 Amp 250v GMA

Dimensions: 4.1” (L) x 15.8” (W) x 21.9” (H)

Colors: UV Output

Working Position: Any Safe Position Modes

Weight: 24 Lbs / 10.8 kgs

Warranty: 1 Year (365 Days)

* Voltage is preset at the factory and is not user selectable.

Please Note: Speciﬁcations and improvements in the design

of this unit and this manual are subject to change without any

prior written notice.

UV Panel HP™ Specifications

©American DJ®

American DJ® World Headquarters:

4295 Charter Street Los Angeles, CA 90058 USA

Tel: 323-582-2650 / Fax: 323-582-2610

Web: www.americandj.com / E-mail: [email protected]

ONE YEAR LIMITED WARRANTY

A. American DJ® hereby warrants, to the original purchaser, American DJ® products to be

free of manufacturing defects in material and workmanship for a period of one year (365

days) from the date of purchase. This warranty shall be valid only if the product is pur-

chased within the United States of America, including possessions and territories. It is the

owner’s responsibility to establish the date and place of purchase by acceptable evidence,

at the time service is sought.

B. For warranty service, send the product only to the American DJ® factory. All shipping

charges must be pre-paid. If the requested repairs or service (including parts replacement)

are within the terms of this warranty, American DJ® will pay return shipping charges only

to a designated point within the United States. If the entire instrument is sent, it must be

shipped in its original package. No accessories should be shipped with the product. If any

accessories are shipped with the product, American DJ® shall have no liability whatsoever

for loss of or damage to any such accessories, nor for the safe return thereof.

C. This warranty is void if the serial number has been altered or removed; if the product is

modiﬁed in any manner which American DJ® concludes, after inspection, affects the reli-

ability of the product; if the product has been repaired or serviced by anyone other than

the American DJ® factory unless prior written authorization was issued to purchaser by

American DJ®; if the product is damaged because not properly maintained as set forth in

the instruction manual.

D. This is not a service contract, and this warranty does not include maintenance, cleaning

or periodic check-up. During the period speciﬁed above, American DJ® will replace defec-

tive parts at its expense, and will absorb all expenses for warranty service and repair labor

by reason of defects in material or workmanship. The sole responsibility of American DJ®

under this warranty shall be limited to the repair of the product, or replacement thereof,

including parts, at the sole discretion of American DJ®. All products covered by this war-

ranty were manufactured after January 1, 1990, and bear identifying marks to that effect.

E. American DJ® reserves the right to make changes in design and/or improvements upon

its products without any obligation to include these changes in any products theretofore

manufactured.

F. No warranty, whether expressed or implied, is given or made with respect to any acces-

sory supplied with products described above. Except to the extent prohibited by applicable

law, all implied warranties made by American DJ® in connection with this product, includ-

ing warranties of merchantability or ﬁtness, are limited in duration to the warranty period

set forth above. And no warranties, whether expressed or implied, including warranties of

merchantability or ﬁtness, shall apply to this product after said period has expired. The

consumer’s and or Dealer’s sole remedy shall be such repair or replacement as is expressly

provided above; and under no circumstances shall American DJ® be liable for any loss or

damage, direct or consequential, arising out of the use of, or inability to use, this product.

G. This warranty is the only written warranty applicable to American DJ® Products and

supersedes all prior warranties and written descriptions of warranty terms and conditions

heretofore published.

H. Lamps are not covered under this or any other warranty either written or implied.

UV Panel HP™ Warranty

Andere American DJ DJ-Equipment Handbücher

American DJ

American DJ Micro Phase Bedienungsanleitung

American DJ

American DJ Lotus Bedienungsanleitung

American DJ

American DJ Sonic Beam II Bedienungsanleitung

American DJ

American DJ Nucleus PRO Bedienungsanleitung

American DJ

American DJ Gobo Flash 4 Bedienungsanleitung

American DJ

American DJ Fusion Scan 250 Bedienungsanleitung

American DJ

American DJ Festive Light Pak II Bedienungsanleitung

American DJ

American DJ LTS-2 Bedienungsanleitung

American DJ

American DJ Space Balls Bedienungsanleitung

American DJ

American DJ MINI-Gressor II Bedienungsanleitung

American DJ

American DJ Bubble Blast Jr Bedienungsanleitung

American DJ

American DJ Crystal Bedienungsanleitung

American DJ

American DJ Octo Beam Bedienungsanleitung

American DJ

American DJ Flash Matrix Hub Bedienungsanleitung

American DJ

American DJ 46HP LED Bedienungsanleitung

American DJ

American DJ Emerald Scan Bedienungsanleitung

American DJ

American DJ GP 250 Bedienungsanleitung

American DJ

American DJ Pinspot LED Bedienungsanleitung

American DJ

American DJ DP-DMX-20L Bedienungsanleitung

American DJ

American DJ HMI 575TM Bedienungsanleitung

American DJ

American DJ Starball LED DMX Bedienungsanleitung

American DJ

American DJ X-CALIBUR Bedienungsanleitung

American DJ

American DJ Stingray Bedienungsanleitung

American DJ

American DJ Pixel Pulse Bar Bedienungsanleitung

Beliebte DJ-Equipment Handbücher anderer Marken

ALPHA LITE

ALPHA LITE ALPHA 1500 Betriebsanleitung

Chauvet

Chauvet OVATION E-930VW Bedienungsanleitung

Snow Masters

Snow Masters Zig Oscillator Bedienungsanleitung

EuroLite

EuroLite 50530554 Bedienungsanleitung

Beamz

Beamz BUV243 Bedienungsanleitung

thomann

thomann Stairville DJ Lase 40-G MK-III Bedienungsanleitung

Eagletone

Eagletone 6 Eyes Flower Bedienungsanleitung

EuroLite

EuroLite FLD-1508 Bedienungsanleitung

Technical Pro

Technical Pro LG8xSEA Bedienungsanleitung

JB Systems

JB Systems Lounge Laser DMX Bedienungsanleitung

Lightmaxx

Lightmaxx Vega Halo 90 Bedienungsanleitung

Elation

Elation FUZE WASH Z350 Bedienungsanleitung

Maverick

Maverick MK3 WASH Bedienungsanleitung

Infinity

Infinity TF-260C7 Fresnel Bedienungsanleitung

Chauvet

Chauvet EVE E-50Z Bedienungsanleitung

Eliminator Lighting

Eliminator Lighting E 138 Bedienungsanleitung

EuroLite

EuroLite Mini Multicolor LED Flashing Light SC Bedienungsanleitung

KAM

KAM DMX Laser80 FScan Bedienungsanleitung