AMP Lighting AFL-4010-4-B-BZ Bedienungs- und Sicherheitshinweise

INSTALLATION & MAINTENANCE GUIDE

Help Hotline:

1-813-978-3900 • Mon-Fri 9am-6pm (EST)

www.amplighting.com

AMP®Low Voltage Landscape Lighting

AMP® DiffusePro Flood Light

AFL-4010-4-B-BZ

AMP®DiffusePro Flood Light

AFL-4010-4-B-BZ

INSTALLATION & MAINTENANCE GUIDE

www.amplighting.com

–2–

Important Safety Instructions: Read Before Installation

This luminaire is intended for installation in accordance with local codes

and the National Electric Code (NEC). Failure to adhere to these codes and

instructions may result in serious injury, property damage and void the

warranty.

These instructions do not intend to cover all variations in installation,

operation maintenance or mounting situations.

1. Make sure the power is turned OFF before installing or servicing this

luminaire.

2. WARNING: risk of electrical shock. Install all luminaires 10 feet (3.05M)

or more from pool, spa or fountain.

3. This luminaire is intended to be used only with a power supply

(transformer) rated maximum of 300 watts (25 AMPS) at 15 volts.

4. Wiring connections must be made with UL listed wire connectors that are

suitable for outdoor use.

5. Position the low voltage wire and wire connector so that it is located

within 6 inches (15.2 cm) from a building structure, a luminaire or

tting.

6. The main low voltage cable is intended for shallow burial - less than 6

inches (152 mm).

7. If additional lengths of low voltage cable are required, please contact

www.amplighting.com or call 1-813-978-3900.

Important Safety Instructions

INSTRUCTIONS PERTAINING TO A RISK OF FIRE, OR INJURY TO PERSONS

Lighted lamp is HOT!

WARNING – To reduce the risk of FIRE OR INJURY TO PERSONS.

1. Turn off/unplug and allow to cool before replacing lamp.

2. Lamp gets HOT quickly! Contact only switch/plug when turning on.

3. Do not touch the hot lens, guard or enclosure.

4. Keep lamp away from materials that may burn.

5. Do not touch lamp at any time. Use a soft cloth. Oil from skin may

damage lamp.

6. Do not operate the luminaire tting with a missing or damaged shield.

SAVE THESE INSTRUCTIONS

[email protected] • 813.978.3900

Product Dimensions

–3–

Package Contents

Install Stake

A. (1) Stake

B. (1) Luminaire

4”

1.5”

2”

Determine the desired location for mounting

the luminaire. Hammer the stake into the

ground until the ange of stake is ush to

grade. To avoid damage to the stake, place a

board on top of stake while hammering.

NOTE: If the ground is hard and the stake is

difcult to install, make a crosscut in ground

using a at shovel.

Board

Stake

Soil

Ground

INSTALLATION & MAINTENANCE GUIDE

–4–

www.amplighting.com

–4–

AMP®DiffusePro Flood Light

AFL-4010-4-B-BZ

Remove Cover and Gasket with Lens

Install Bulb

Loosen the lock screws and remove the cover and gasket with the lens

from the luminaire to expose the socket.

Luminaire

Socket

Cover

Gasket with Lens

Lock Screw

Insert the bulb with correct

wattage and type marked on the

luminaire label.

CAUTION: Do not exceed maximum

wattage marked on luminaire label.

NOTE: DO NOT touch bulb with

bare hands. Use soft cloth to

handle lamp.

Bulb

Socket

[email protected] • 813.978.3900

–5–

INSTALLATION & MAINTENANCE GUIDE

AMP®DiffusePro Flood Light

AFL-4010-4-B-BZ

Install Gasket with Lens and Cover

Install Luminaire to Stake

Decide which lens you would like to use with this xture. Then install

the gasket with your lens of choice back onto the luminaire and secure

with the lock screws.

Luminaire

Cover

Gasket with Lens

Lock Screw

Clear away an area in the ground

at the wireway slot on top of the

stake. Lay the luminaire pigtail

into the wireway slot and screw the

xture on to the stake. Tighten the

hex nut on the luminaire against the

stake and tighten until snug.

Luminaire

Hex Nut

Stake

Pigtail

Wireway Slot

INSTALLATION & MAINTENANCE GUIDE

–6–

www.amplighting.com

–6–

Install/Replace Bulb

AMP®DiffusePro Flood Light

AFL-4010-4-B-BZ

Wire Connections

Strip both leads from the luminaire pigtail. Using two wire connectors (sold

separately), connect the leads from the luminaire to the main supply cable

leads.

Pigtail

Main Supply Cable

Wire Connectors

Please reverse Step 2 - Step 4 to expose the bulb and replace it with correct

wattage and type marked on the luminaire label. Reinstall the gasket with

the lens and cover.

IMPORTANT: Halogen lamps must be protected from moisture and dust at all

times. Always reinstall gasket with lens and cover when removed.

–6––6–

[email protected] • 813.978.3900

–7–

IS-AFL-4010-4-B-BZ-ver1.pdf

Specications and product details subject to change without notice.

[email protected] • 813.978.3900

Help Hotline:

1-813-978-3900 • Mon-Fri 9am-6pm (EST)

www.amplighting.com

Inhaltsverzeichnis

Andere AMP Lighting Landschaftsbeleuchtung Handbücher

AMP Lighting

AMP Lighting HydraPro AWL-5005-B-BZ Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting VariantPro Spotlight Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting InfusePro Step Light Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting PetalPro APl-3033-B-BZ Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting Sol Top Solar LED Post-Top Light Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting MR16 HydraPro Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting PinnaclePro Mini Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting AWL-710IR-X-BBZ Series Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting AWL-712IR-BBZ Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting AAL-1015-40-B-BZ Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting AHS-7006-X-B-BZ Series Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting PolynesianPro Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting ONE HydraPro AWL-700IR-25-BBZ Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting PillarPro APL-3019-4-B-BZ Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting HydraPro AWL-5006-B-BZ Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting TuscanPro APL-3026-4-B-BZ Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting LocketPro Mini Hanging Light Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting APL-301X-XX-4-B-BZ Series Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting FoundationPro Paver Light Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting APL-3031-B-BZ Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting Deck-DesignPro Classic Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting PinnaclePro AAL-1017-4-B-BZ Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting APL-3016-4-B-BZ Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting ASPL-3030-B-BZ Bedienungs- und Sicherheitshinweise

Beliebte Landschaftsbeleuchtung Handbücher anderer Marken

Intex

Intex SL1006 Bedienungsanleitung

LED Group

LED Group ROBUS R2IN13W Bedienungsanleitung

Patriot Lighting

Patriot Lighting 343-1484 Bedienungsanleitung

LIGMAN

LIGMAN JET 44 Bedienungsanleitung

Hess

Hess SERA G: SERA S Bedienungsanleitung

LIGMAN

LIGMAN MALTA 1 Bedienungsanleitung

Cooper Lighting

Cooper Lighting Invue 42 - 175W Bedienungsanleitung

Saxby Lighting

Saxby Lighting Islay 68784 Handbuch

LIGMAN

LIGMAN EU-10016-3 Bedienungsanleitung

Cooper Lighting

Cooper Lighting McGraw-Edison ZD Credenza Bedienungsanleitung

LIGMAN

LIGMAN KI-60475 Bedienungsanleitung

Cooper Lighting

Cooper Lighting Generation CLB25MWW5C373 Bedienungsanleitung

Malibu Boats

Malibu Boats CL905K Bedienungsanleitung

LIGMAN

LIGMAN NYB-30161 Bedienungsanleitung

LIGMAN

LIGMAN SI-80021 Bedienungsanleitung

Volt

Volt 2-in-1 Tiki-Brass Torch Light Bedienungsanleitung

Malibu Boats

Malibu Boats CM110P Bedienungsanleitung

LIGMAN

LIGMAN VIENNA 1 Bedienungsanleitung