AMP Lighting PetalPro APl-3033-B-BZ Bedienungs- und Sicherheitshinweise

INSTALLATION & MAINTENANCE GUIDE

Help Hotline:

1-813-978-3900 • Mon-Fri 9am-6pm (EST)

www.amplighting.com

AMP®Low Voltage Landscape Lighting

AMP® PetalPro Path & Area Light

APl-3033-B-BZ

AMP®PetalPro Path & Area Light

APL-3033-B-BZ

INSTALLATION & MAINTENANCE GUIDE

www.amplighting.com

–2–

Important Safety Instructions: Read Before Installation

Important Safety Instructions

This luminaire is intended for installation in accordance with local codes

and the National Electric Code (NEC). Failure to adhere to these codes and

instructions may result in serious injury, property damage and void the war-

ranty.

These instructions do not intend to cover all variations in installation, opera-

tion maintenance or mounting situations.

1. Make sure that the power is turned OFF before installing or servicing

this xture.

2. Warning: this xture is not intended to be installed within 10 feet [3

meters] of a pool, spa or fountain.

3. This xture is intended to be used only with a power supply (transform-

er) rated maximum of 300 watts (25 AMPS) at 15 volts.

4. Underground Low Energy Cable must not be buried over 6” (15.2 cm) in

order to connect to the main low voltage cable.

5. Wiring connections must be made with UL Listed wire connectors that

are suitable for the application.

6. Position the wire connector so that it is located within 6 inches (15.2

cm) from a building structure, a luminaire, or tting.

INSTRUCTIONS PERTAINING TO A RISK OF FIRE, OR INJURY TO PERSONS

Lighted lamp is HOT!

WARNING – To reduce the risk of FIRE OR INJURY TO PERSONS.

1. Turn off/unplug and allow to cool before reducing lamp.

2. Lamp gets HOT quickly!

3. Do not touch the hot lens, guard or cowl.

4. Keep lamp away from materials that may burn.

5. Do not touch lamp at any time.

6. Use a soft cloth.

7. Oil from skin may damage lamp.

8. Do not operate the xture with a damaged or missing lens or shield.

[email protected] • 813.978.3900

Product Dimensions

–3–

Package Contents

Product Dimensions

A. (1) Fixture Body

A. (1) Mounting Accessory

B. (1) GU4 or M11 LED Bulb

26”

5”

4.87”

4.87” 7.5”

INSTALLATION & MAINTENANCE GUIDE

–4–

www.amplighting.com

–4–

AMP®PetalPro Path & Area Light

APL-3033-B-BZ

Remove Lens

Shade

Screw

Lens

Using a screwdriver, loosen

screws on the lens and remove

the lens from the shade.

Install Bulb

Socket

GU4 or

MR11 Bulb

Insert bulb with correct wattage

and type marked on xture label

and push into place.

CAUTION: Do not exceed maxi-

mum wattage marked on xture

label.

Install Lens

Shade

Screw

Lens

Place the lens back onto the

shade and secure with previously

removed screws. Tighten until

snug with screwdriver.

[email protected] • 813.978.3900

–5–

INSTALLATION & MAINTENANCE GUIDE

Install Stake

AMP®PetalPro Path & Area Light

APL-3033-B-BZ

Determine the desired location

for mounting the luminaire.

Hammer the stake into the

ground until ange of stake is

ush to grade. To avoid damage

to the stake, place a board on

top of the stake while hammer-

ing.

Note: If the ground is hard and

the stake is difcult to install,

make a crosscut in the ground

using a at shovel.

Board

Ground

Soil

Stake

Install Fixture Body to Stake

Pass supply wires through

the center hole of the stake

and thread the stem onto

the stake. Hand tighten until

snug. Clear away area in

ground and lay supply wires

into wireway slots.

Ground

Stem

Supply Wires

Soil

Stake

INSTALLATION & MAINTENANCE GUIDE

–6–

www.amplighting.com

–6–

Install/Replace Bulb

Wire Connections

AMP®PetalPro Path & Area Light

APL-3033-B-BZ

Strip two leads from xture wires. Using two UL listed wire connectors

(sold separately), connect leads from xture wires to main supply cable

leads.

Main Supply Cable

Fixture Wires

Wire Connectors

Adjust Shade Direction

Loosen the knuckle to adjust the

shade to your desired angle. Once

your desired angle is achieved,

hand tighten the lock screw to

secure the shade direction.

Shade

Lock Screw ROTATE

Please reverse Step 1 - Step 3 to expose the bulb and replace it with the

correct wattage and type marked on the xture label.

IMPORTANT: The Bulb must be protected from moisture and dust at all

times. Always reinstall the lens when removed.

–6––6–

[email protected] • 813.978.3900

–7–

IS-APL-3033-B-BZ-ver1.pdf

Specications and product details subject to change without notice.

[email protected] • 813.978.3900

Help Hotline:

1-813-978-3900 • Mon-Fri 9am-6pm (EST)

www.amplighting.com

Inhaltsverzeichnis

Andere AMP Lighting Landschaftsbeleuchtung Handbücher

AMP Lighting

AMP Lighting AlpinePro Path Light Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting Sol Box ASDL-2014-P-BK Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting MR16 HydraPro Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting Sol Top Solar LED Post-Top Light Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting AFL-40 LI-B-BZ Series Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting DecoPro ADL-2012-4-B-BZ Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting APL-3015-B-BZ Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting AFL-4010-4-B-BZ Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting HydraPro AUL-8001-25-B-BZ Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting EscherPro AAL-1023 Series Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting ASAL-1025-B-BZ Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting ADL Series Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting AAL-1012 Series Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting HydraPro AWL-5006-B-BZ Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting AHS-7003-4-B-BZ Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting AAL-1024-0-B-BZ Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting BeaconPro Path & Area Light Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting ASDL-2014-P-WH Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting AAL-1015-40-B-BZ Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting SleekPro MR11 Downlight Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting AAR-I-B-BZ Series Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting TieredPro Path Light Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting AWL-710IR-X-BBZ Series Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting TuscanPro AHT-3517-B-BZ Bedienungs- und Sicherheitshinweise

Beliebte Landschaftsbeleuchtung Handbücher anderer Marken

Intex

Intex SL1006 Bedienungsanleitung

LED Group

LED Group ROBUS R2IN13W Bedienungsanleitung

Patriot Lighting

Patriot Lighting 343-1484 Bedienungsanleitung

LIGMAN

LIGMAN JET 44 Bedienungsanleitung

Hess

Hess SERA G: SERA S Bedienungsanleitung

LIGMAN

LIGMAN MALTA 1 Bedienungsanleitung

Cooper Lighting

Cooper Lighting Invue 42 - 175W Bedienungsanleitung

Saxby Lighting

Saxby Lighting Islay 68784 Handbuch

LIGMAN

LIGMAN EU-10016-3 Bedienungsanleitung

Cooper Lighting

Cooper Lighting McGraw-Edison ZD Credenza Bedienungsanleitung

LIGMAN

LIGMAN KI-60475 Bedienungsanleitung

Cooper Lighting

Cooper Lighting Generation CLB25MWW5C373 Bedienungsanleitung

Malibu Boats

Malibu Boats CL905K Bedienungsanleitung

LIGMAN

LIGMAN NYB-30161 Bedienungsanleitung

LIGMAN

LIGMAN SI-80021 Bedienungsanleitung

Volt

Volt 2-in-1 Tiki-Brass Torch Light Bedienungsanleitung

Malibu Boats

Malibu Boats CM110P Bedienungsanleitung

LIGMAN

LIGMAN VIENNA 1 Bedienungsanleitung