AMP Lighting APL-3031-B-BZ Bedienungs- und Sicherheitshinweise

INSTALLATION & MAINTENANCE GUIDE

Help Hotline:

1-813-978-3900 • Mon-Fri 9am-6pm (EST)

www.amplighting.com

AMP®Low Voltage Landscape Lighting

AMP® G2 ArchPro Path & Area Light

APL-3031-B-BZ

AMP®G2 ArchPro Path & Area Light

APL-3031-B-BZ

INSTALLATION & MAINTENANCE GUIDE

www.amplighting.com

–2–

Important Safety Instructions: Read Before Installation

Important Safety Instructions

This luminaire is intended for installation in accordance with local codes

and the National Electric Code (NEC). Failure to adhere to these codes and

instructions may result in serious injury, property damage and void the war-

ranty.

These instructions do not intend to cover all variations in installation, opera-

tion maintenance or mounting situations.

1. Make sure that the power is turned OFF before installing or servicing

this xture.

2. Warning: this xture is not intended to be installed within 10 feet [3

meters] of a pool, spa or fountain.

3. This xture is intended to be used only with a power supply (transform-

er) rated maximum of 300 watts (25 AMPS) at 15 volts.

4. Underground Low Energy Cable must not be buried over 6” (15.2 cm) in

order to connect to the main low voltage cable.

5. Wiring connections must be made with UL Listed wire connectors that

are suitable for the application.

6. Position the wire connector so that it is located within 6 inches (15.2

cm) from a building structure, a luminaire, or tting.

INSTRUCTIONS PERTAINING TO A RISK OF FIRE, OR INJURY TO PERSONS

Lighted lamp is HOT!

WARNING – To reduce the risk of FIRE OR INJURY TO PERSONS.

1. Turn off/unplug and allow to cool before reducing lamp.

2. Lamp gets HOT quickly!

3. Do not touch the hot lens, guard or cowl.

4. Keep lamp away from materials that may burn.

5. Do not touch lamp at any time.

6. Use a soft cloth.

7. Oil from skin may damage lamp.

8. Do not operate the xture with a damaged or missing lens or shield.

[email protected] • 813.978.3900

Product Dimensions

–3–

Package Contents

A. (1) Fixture Body

Parts Required

A. (1) Mounting Accessory

B. (1) GU4 Bi-Pin

24.43”

3.39”

5.44”

11.81”

INSTALLATION & MAINTENANCE GUIDE

–4–

www.amplighting.com

–4–

AMP®G2 ArchPro Path & Area Light

APL-3031-B-BZ

Remove Lens

Loosen the lens and remove it

from the xture body.

Fixture Body

Lens

Install Bulb

Insert the bulb with the correct

wattage and type marked on the

xture label and push into place.

CAUTION: Do not exceed maxi-

mum wattage marked on xture

label.

Socket

Bulb

Install Lens

Thread the lens back onto the x-

ture body and hand tighten until

snug.

Fixture Body

[email protected] • 813.978.3900

–5–

INSTALLATION & MAINTENANCE GUIDE

Install Stake

Install Fixture to Stake

AMP®G2 ArchPro Path & Area Light

APL-3031-B-BZ

Determine the desired location

for mounting the stake mount.

Hammer the stake into the

ground until ange of stake is

ush to grade. To avoid damage

to the stake, place a board on

top of the stake while hammer-

ing.

Note: If the ground is hard and

the stake is difcult to install,

make a crosscut in the ground

using a at shovel.

Board

Ground

Soil

Stake

Pass the supply wires through

the center hole of the stake

and thread the stem onto

the stake. Hand tighten until

snug. Clear away an area in

the ground and lay the supply

wires into the wireway slot.

Ground

Stem

Supply Wires

Soil

Stake

INSTALLATION & MAINTENANCE GUIDE

–6–

www.amplighting.com

–6–

Wire Connections

AMP®G2 ArchPro Path & Area Light

APL-3031-B-BZ

Strip both leads from the xture wires. Using two UL listed wire connec-

tors (sold separately), connect the leads from the xture wires to the

main supply cable leads.

Main Supply Cable

Fixture Wires

Wire Connectors

Adjust Shade Direction

There are two methods to adjust the shade direction.

NOTE: Do not rotate the shade a full 3600. This will damage the internal

wiring.

A. Loosen the knuckle on the stem to adjust the shade to your desired

angle. Once your desired angle is achieved, hand tighten the knuckle

to secure the shade direction.

B. Using the Allen wrench, loosen the set screw on the stem and adjust

the shade to your desired angle. Once your desired angle is achieved,

tighten the set screw using the Allen wrench to secure the shade

direction.

Shade

Knuckle Allen Wrench Set Screw

ROTATE

OPTION A OPTION B

ROTATE

[email protected] • 813.978.3900

–7–

Install/Replace Bulb

Reverse Step 2 - Step 3 to expose the bulb and replace it with the correct

wattage and type marked on the xture label. Then, reinstall the lens.

IMPORTANT: The bulb must be protected from moisture and dust at all

times. Always reinstall the lens when removed.

IS-APL-3031-B-BZ-ver1.pdf

Specications and product details subject to change without notice.

[email protected] • 813.978.3900

Help Hotline:

1-813-978-3900 • Mon-Fri 9am-6pm (EST)

www.amplighting.com

Inhaltsverzeichnis

Andere AMP Lighting Landschaftsbeleuchtung Handbücher

AMP Lighting

AMP Lighting InfusePro Step Light Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting AFL-4010-4-B-BZ Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting HydraPro AUL-8001-25-B-BZ Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting HydraPro AWL-5005-B-BZ Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting Estate PendantPro ASI-9006-4036-B-BZ Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting AviatorPro Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting APL-301X-XX-4-B-BZ Series Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting APL-3032-26-4-B-BZ Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting ADL-2010 Series Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting AlpinePro Path Light Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting ADL Series Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting ONE ControlPro AAL-1813IR-40-BBZ Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting AHS-7004-4-B-BZ Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting LocketPro Mini Hanging Light Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting BulletPro MR8 Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting PillarPro APL-3019-4-B-BZ Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting KinglyPro APL-3020-B-BZ Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting PinnaclePro APL-3017-4 Series Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting APL-3011-4-B-BZ Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting HydraPro AWL-5006-B-BZ Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting ASM-2407 Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting InfusePro AHS- 630X-4-B-BZ Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting ASAL-1025-B-BZ Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting TuscanPro AHT-3517-B-BZ Bedienungs- und Sicherheitshinweise

Beliebte Landschaftsbeleuchtung Handbücher anderer Marken

Intex

Intex SL1006 Bedienungsanleitung

LED Group

LED Group ROBUS R2IN13W Bedienungsanleitung

Patriot Lighting

Patriot Lighting 343-1484 Bedienungsanleitung

LIGMAN

LIGMAN JET 44 Bedienungsanleitung

Hess

Hess SERA G: SERA S Bedienungsanleitung

LIGMAN

LIGMAN MALTA 1 Bedienungsanleitung

Cooper Lighting

Cooper Lighting Invue 42 - 175W Bedienungsanleitung

Saxby Lighting

Saxby Lighting Islay 68784 Handbuch

LIGMAN

LIGMAN EU-10016-3 Bedienungsanleitung

Cooper Lighting

Cooper Lighting McGraw-Edison ZD Credenza Bedienungsanleitung

LIGMAN

LIGMAN KI-60475 Bedienungsanleitung

Cooper Lighting

Cooper Lighting Generation CLB25MWW5C373 Bedienungsanleitung

Malibu Boats

Malibu Boats CL905K Bedienungsanleitung

LIGMAN

LIGMAN NYB-30161 Bedienungsanleitung

LIGMAN

LIGMAN SI-80021 Bedienungsanleitung

Volt

Volt 2-in-1 Tiki-Brass Torch Light Bedienungsanleitung

Malibu Boats

Malibu Boats CM110P Bedienungsanleitung

LIGMAN

LIGMAN VIENNA 1 Bedienungsanleitung