AMP Lighting HydraPro AWL-5006-B-BZ Bedienungs- und Sicherheitshinweise

INSTALLATION & MAINTENANCE GUIDE

Help Hotline:

1-813-978-3900 • Mon-Fri 9am-6pm (EST)

www.amplighting.com

AMP®Low Voltage Landscape Lighting

AMP® HydraPro MR11 In-Grade Light

AWL-5006-B-BZ

AMP®HydraPro MR11 In-Grade Light

AWL-5006-B-BZ

INSTALLATION & MAINTENANCE GUIDE

www.amplighting.com

–2–

Important Safety Instructions: Read Before Installation

Important Safety Instructions

INSTRUCTIONS PERTAINING TO A RISK OF FIRE, OR INJURY TO PERSONS

Lighted lamp is HOT!

WARNING – To reduce the risk of FIRE OR INJURY TO PERSONS.

1. Turn off/unplug and allow to cool before replacing lamp.

2. Lamp gets HOT quickly! Contact only switch/plug when turning on.

3. Do not touch the hot lens, guard or enclosure.

4. Keep lamp away from materials that may burn.

5. Do not touch lamp at any time. Use a soft cloth. Oil from skin may

damage lamp.

6. Do not operate the luminaire tting with a missing or damaged shield.

SAVE THESE INSTRUCTIONS

This xture is intended for installation in accordance with local codes and

the National Electric Code (NEC). Failure to adhere to these codes and

instructions may result in serious injury, property damage and void the

warranty.

These instructions do not intend to cover all variations in installation, oper-

ation maintenance or mounting situations.

1. Make sure that the power is turned OFF before installing or servicing

this xture.

2. Warning: this xture is not intended to be installed within 10 feet [3

meters] of a pool, spa or fountain.

3. This xture is intended to be used only with a power supply (trans-

former) rated maximum of 300 watts (25 AMPS) at 15 volts.

4. Underground Low Energy Cable must not be buried over 6” (15.2 cm)

in order to connect to the main low voltage cable.

5. Wiring connections must be made with UL listed wire connectors that

are suitable for the application.

6. Position the wire connector so that it is located within 6 inches (15.2

cm) from a building structure, a luminaire, or tting.

[email protected] • 813.978.3900

Product Dimensions

–3–

Package Contents

A. (1) Fixture Body

Parts Required (Sold Separately)

A. (1) MR11 Lamp

2.75”

2.85”

INSTALLATION & MAINTENANCE GUIDE

–4–

www.amplighting.com

–4–

AMP®HydraPro MR11 In-Grade Light

AWL-5006-B-BZ

Remove Faceplate

Use a screwdriver to loosen the

screws on the faceplate and

remove the lens from the xture

body.

Faceplate

Lens

Screw

Fixture Body

Install Lamp

Insert the lamp with the correct

wattage and type marked on the

xture label and push rmly into place.

CAUTION: Do not exceed maximum

wattage marked on xture label.

Socket

MR11 Lamp

Install Faceplate

Place the lens and the faceplate

back onto the xture body and

secure the removed screws in a

star pattern using a screwdriver.

Tighten until snug.

Lens

Faceplate

Screw

Fixture Body

[email protected] • 813.978.3900

–5–

INSTALLATION & MAINTENANCE GUIDE

AMP®HydraPro MR11 In-Grade Light

AWL-5006-B-BZ

Dig Hole

Hole

Soil

3”

Prepare a hole in the ground.

Make sure there are approxi-

mately 3” spaces surrounding

the xture for pea gravel or

sand.

Wire Connection

Strip both leads from the luminaire pigtail. Using two wire connectors

(sold separately), connect the leads from the xture body to the main

supply cable leads.

Pigtail

Main Supply Cable

Supply Cables Wire Connectors

INSTALLATION & MAINTENANCE GUIDE

–6–

www.amplighting.com

–6–

AMP®HydraPro MR11 In-Grade Light

AWL-5006-B-BZ

Fill Hole

Install the xture in the hole

and ll the hole with pea

gravel or sand.

Pea Gravel

or Sand

Soil

Fixture

–6––6–

[email protected] • 813.978.3900

–7–

Install/Replace Glare Guard

Remove Faceplate

Use a screwdriver to loosen the

screws on the faceplate and

remove the lens from the xture

body.

Faceplate

Lens

Screw

Fixture Body

Replace Faceplate

Place the lens and faceplate onto

the xture body and secure with

previously removed screws in a

star pattern. Hand tighten until

snug with a screwdriver.

Faceplate

Lens

Screw

Fixture Body

Option 1 Option 2

Faceplate Replacement Options

Option 3 Option 4

Install/Replace Lamp

Repeat step 1 - step 3 to remove the faceplate and expose the lamp.

Replace it with the correct wattage and type marked on the xture label.

Then, reinstall the faceplate.

IMPORTANT: Lamps must be protected from moisture and dust at all

times. Always reinstall the faceplate when removed.

IS-AWL-5006-B-BZ-ver1.pdf

Specications and product details subject to change without notice.

[email protected] • 813.978.3900

Help Hotline:

1-813-978-3900 • Mon-Fri 9am-6pm (EST)

www.amplighting.com

Inhaltsverzeichnis

Andere AMP Lighting Landschaftsbeleuchtung Handbücher

AMP Lighting

AMP Lighting Deck-DesignPro Classic Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting Wider NovellePro APL-3026-4-B-BZ Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting PillarPro APL-3019-4-B-BZ Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting ONE ControlPro AAL-1813IR-40-BBZ Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting SleekPro MR11 Downlight Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting InfusePro Step Light Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting AFL-4014-4-B-BZ Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting APL-3012-B-BZ Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting VariantPro AAL-1028-0-B-BZ Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting ADL-2010 Series Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting PinnaclePro APL-3017-4 Series Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting TuscanPro AHT-3517-B-BZ Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting APL-3016-4-B-BZ Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting AHS-7003-4-B-BZ Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting ASPL-3028 Series Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting AAL-1024-0-B-BZ Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting AlpinePro Path Light Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting FoundationPro Paver Light Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting AxialPro APL-3025-4-B-BZ Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting MR16 HydraPro Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting KinglyPro APL-3020-B-BZ Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting PolynesianPro Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting 3601 Series Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting AHS-7006-X-B-BZ Series Bedienungs- und Sicherheitshinweise

Beliebte Landschaftsbeleuchtung Handbücher anderer Marken

Intex

Intex SL1006 Bedienungsanleitung

LED Group

LED Group ROBUS R2IN13W Bedienungsanleitung

Patriot Lighting

Patriot Lighting 343-1484 Bedienungsanleitung

LIGMAN

LIGMAN JET 44 Bedienungsanleitung

Hess

Hess SERA G: SERA S Bedienungsanleitung

LIGMAN

LIGMAN MALTA 1 Bedienungsanleitung

Cooper Lighting

Cooper Lighting Invue 42 - 175W Bedienungsanleitung

Saxby Lighting

Saxby Lighting Islay 68784 Handbuch

LIGMAN

LIGMAN EU-10016-3 Bedienungsanleitung

Cooper Lighting

Cooper Lighting McGraw-Edison ZD Credenza Bedienungsanleitung

LIGMAN

LIGMAN KI-60475 Bedienungsanleitung

Cooper Lighting

Cooper Lighting Generation CLB25MWW5C373 Bedienungsanleitung

Malibu Boats

Malibu Boats CL905K Bedienungsanleitung

LIGMAN

LIGMAN NYB-30161 Bedienungsanleitung

LIGMAN

LIGMAN SI-80021 Bedienungsanleitung

Volt

Volt 2-in-1 Tiki-Brass Torch Light Bedienungsanleitung

Malibu Boats

Malibu Boats CM110P Bedienungsanleitung

LIGMAN

LIGMAN VIENNA 1 Bedienungsanleitung