AMP Lighting AggregatePro AAL-1013 B-BZ Series Bedienungs- und Sicherheitshinweise

INSTALLATION & MAINTENANCE GUIDE

Help Hotline:

1-813-978-3900 • Mon-Fri 9am-6pm (EST)

www.amplighting.com

AMP®Low Voltage Landscape Lighting

AMP® AggregatePro Spotlight

AAL-1013-XX-B-BZ

AMP®AggregatePro Spotlight

AAL-1013-XX-B-BZ

INSTALLATION & MAINTENANCE GUIDE

www.amplighting.com

–2–

Important Safety Instructions: Read Before Installation

This luminaire is intended for installation in accordance with local codes

and the National Electric Code (NEC). Failure to adhere to these codes and

instructions may result in serious injury, property damage and void the

warranty.

These instructions do not intend to cover all variations in installation,

operation maintenance or mounting situations.

1. Make sure the power is turned OFF before installing or servicing this

luminaire.

2. WARNING: risk of electrical shock. Install all luminaires 10 feet (3.05M)

or more from pool, spa or fountain.

3. This luminaire is intended to be used only with a power supply

(transformer) rated maximum of 300 watts (25 AMPS) at 15 volts.

4. Wiring connections must be made with UL listed wire connectors that are

suitable for outdoor use.

5. Position the low voltage wire and wire connector so that it is located

within 6 inches (15.2 cm) from a building structure, a luminaire or

tting.

6. The main low voltage cable is intended for shallow burial - less than 6

inches (152 mm).

7. If additional lengths of low voltage cable are required, please contact

www.amplighting.com or call 1-813-978-3900.

Important Safety Instructions

INSTRUCTIONS PERTAINING TO A RISK OF FIRE, OR INJURY TO PERSONS

Lighted lamp is HOT!

WARNING – To reduce the risk of FIRE OR INJURY TO PERSONS.

1. Turn off/unplug and allow to cool before replacing lamp.

2. Lamp gets HOT quickly! Contact only switch/plug when turning on.

3. Do not touch the hot lens, guard or enclosure.

4. Keep lamp away from materials that may burn.

5. Do not touch lamp at any time. Use a soft cloth. Oil from skin may

damage lamp.

6. Do not operate the luminaire tting with a missing or damaged shield.

SAVE THESE INSTRUCTIONS

[email protected] • 813.978.3900

Product Dimensions

–3–

Package Contents

Remove Glare Guard

A. (1) Fixture

B. (1) Stake

7”

3”

2”

Loosen the set screw and

remove the glare guard from

the xture.

Glare

Guard

Set Screw

Fixture

INSTALLATION & MAINTENANCE GUIDE

–4–

www.amplighting.com

–4–

AMP®AggregatePro Spotlight

AAL-1013-XX-B-BZ

Remove Lens

Install Lamp

Loosen the lens and remove it from

the xture.

Fixture

Lens

Socket

Fixture

Insert the lamp with the correct

wattage and type marked on the

xture label.

CAUTION: Do not exceed maximum

wattage marked on luminaire label.

NOTE: DO NOT touch lamp with bare

hands. Use soft cloth to handle lamp.

MR16 Lamp

[email protected] • 813.978.3900

–5–

INSTALLATION & MAINTENANCE GUIDE

AMP®AggregatePro Spotlight

AAL-1013-XX-B-BZ

Install Lens

Install Glare Guard

Place the lens over the lamp and

thread onto the xture.

Lens

Fixture

Attach the glare guard back onto

the lens and secure with the set

screw. Tighten until snug.

Fixture

Glare

Guard

Set Screw

INSTALLATION & MAINTENANCE GUIDE

–6–

www.amplighting.com

–6–

AMP®AggregatePro Spotlight

AAL-1013-XX-B-BZ

Install Stake

Board

Stake

Soil

Ground

Determine the desired location for

mounting the xture. Hammer the

stake into the ground until ange

of stake is ush to grade. To avoid

damage to the stake, place a board

on top of the stake while hammering.

NOTE: If the ground is hard and the

stake is difcult to install, make a

crosscut in the ground using a at

shovel.

Install Fixture to Stake

Fixture

Stake

Pigtail

Clear away an area in the

ground at the wireway slot

on top of the stake. Lay the

luminaire pigtail into the

wireway slot and screw the

xture on to the stake. Tighten

until snug.

Wireway Slot

–6––6–

[email protected] • 813.978.3900

–7–

Install/Replace Lamp

Strip both the leads from the luminaire pigtail. Using two wire

connectors (sold separately), connect the leads from the luminaire to

the main supply cable leads.

Pigtail

Main Supply Cable

Wire Connectors

Install Fixture to Stake

Loosen the set screw on glare guard, remove the glare guard and the lens

to expose the lamp. Replace it with the correct wattage and type marked

on the xture label. Then reinstall the lens and glare guard and tighten

with the set screw.

IMPORTANT: Lamp must be protected from moisture and dust at all times.

Always reinstall the lens and glare guard when moved.

IS-AAL-1013-XX-B-BZ-ver1.pdf

Specications and product details subject to change without notice.

[email protected] • 813.978.3900

Help Hotline:

1-813-978-3900 • Mon-Fri 9am-6pm (EST)

www.amplighting.com

Inhaltsverzeichnis

Andere AMP Lighting Landschaftsbeleuchtung Handbücher

AMP Lighting

AMP Lighting Wider NovellePro APL-3026-4-B-BZ Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting VAL-91 Series Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting ONE ControlPro AAL-1813IR-40-BBZ Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting AMP RGBW Max PinnaclePro LED Spotlight Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting APL-3024-4-B-BZ Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting ShellPro APL-3034-B-BZ Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting Deck-DesignPro Classic Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting HydraPro AWL-5006-B-BZ Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting PolynesianPro Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting PetalPro APl-3033-B-BZ Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting APL-301X-XX-4-B-BZ Series Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting AAL-1012 Series Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting AHS-7003-4-B-BZ Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting ASDL-2014-P-WH Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting APL-3012-B-BZ Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting SleekPro MR11 Downlight Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting FoundationPro Paver Light Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting AFL-40 B-BZ Series Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting AviatorPro Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting ADL-2010 Series Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting AFL-4011-4-B-BZ Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting ASM-2407 Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting AHS-7004-4-B-BZ Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting PinnaclePro AAL-1016-40-B-BZ Bedienungs- und Sicherheitshinweise

Beliebte Landschaftsbeleuchtung Handbücher anderer Marken

Intex

Intex SL1006 Bedienungsanleitung

LED Group

LED Group ROBUS R2IN13W Bedienungsanleitung

Patriot Lighting

Patriot Lighting 343-1484 Bedienungsanleitung

LIGMAN

LIGMAN JET 44 Bedienungsanleitung

Hess

Hess SERA G: SERA S Bedienungsanleitung

LIGMAN

LIGMAN MALTA 1 Bedienungsanleitung

Cooper Lighting

Cooper Lighting Invue 42 - 175W Bedienungsanleitung

Saxby Lighting

Saxby Lighting Islay 68784 Handbuch

LIGMAN

LIGMAN EU-10016-3 Bedienungsanleitung

Cooper Lighting

Cooper Lighting McGraw-Edison ZD Credenza Bedienungsanleitung

LIGMAN

LIGMAN KI-60475 Bedienungsanleitung

Cooper Lighting

Cooper Lighting Generation CLB25MWW5C373 Bedienungsanleitung

Malibu Boats

Malibu Boats CL905K Bedienungsanleitung

LIGMAN

LIGMAN NYB-30161 Bedienungsanleitung

LIGMAN

LIGMAN SI-80021 Bedienungsanleitung

Volt

Volt 2-in-1 Tiki-Brass Torch Light Bedienungsanleitung

Malibu Boats

Malibu Boats CM110P Bedienungsanleitung

LIGMAN

LIGMAN VIENNA 1 Bedienungsanleitung