AMP Lighting ONE ControlPro AAL-1813IR-40-BBZ Bedienungs- und Sicherheitshinweise

INSTALLATION & MAINTENANCE GUIDE

Help Hotline:

1-813-978-3900 • Mon-Fri 9am-6pm (EST)

www.amplighting.com

AMP®Low Voltage Landscape Lighting

AMP®ONE ControlProTM 200 LED Downlight

AAL-1813IR-40-BBZ

AMP®ONE ControlProTM 200 LED Downlight

AAL-1813IR-40-BBZ

Important Safety Instructions: Read Before Installation

INSTALLATION & MAINTENANCE GUIDE

www.amplighting.com

–2–

This luminaire is intended for installation in accordance with local codes

and the National Electric Code (NEC). Failure to adhere to these codes and

instructions may result in serious injury, property damage and void the

warranty.

These instructions do not intend to cover all variations in installation,

operation maintenance or mounting situations.

1. Make sure the power is turned OFF before installing or servicing this

luminaire.

2. WARNING: risk of electrical shock. Install all luminaires 10 feet (3.05M)

or more from pool, spa or fountain.

3. This luminaire is intended to be used only with a power supply

(transformer) rated maximum of 300 watts (25 AMPS) at 15 volts.

4. Wiring connections must be made with UL listed wire connectors that are

suitable for outdoor use.

5. Position the low voltage wire and wire connector so that it is located

within 6 inches (15.2 cm) from a building structure, a luminaire or

tting.

6. The main low voltage cable is intended for shallow burial - less than 6

inches (152 mm).

7. If additional lengths of low voltage cable are required, please contact

www.amplighting.com or call 1-813-978-3900.

Important Safety Instructions

INSTRUCTIONS PERTAINING TO A RISK OF FIRE, OR INJURY TO PERSONS

Lighted lamp is HOT!

WARNING – To reduce the risk of FIRE OR INJURY TO PERSONS.

1. Turn off/unplug and allow to cool before replacing lamp.

2. Lamp gets HOT quickly! Contact only switch/plug when turning on.

3. Do not touch the hot lens, guard or enclosure.

4. Keep lamp away from materials that may burn.

5. Do not touch lamp at any time. Use a soft cloth. Oil from skin may

damage lamp.

6. Do not operate the luminaire tting with a missing or damaged shield.

SAVE THESE INSTRUCTIONS

[email protected] • 813.978.3900

Parts Required (sold separately)

–3–

Package Contents

Install Fixture

A. (1) Fixture

B. (1) 350 Optic

A. (1) ONE Design-Master Remote ControlTM

Product Dimensions

4 1/8”

6 5/8”

4.68”

Determine the desired location

for the xture. Place the washers

onto the self-tapping screws. Pass

the self-tapping screws through

the holes of the feet of xture and

spacers. Thread the self-tapping

screws into the desired location to

secure the xture.

NOTE: Anchors are required for

brick walls or concrete walls. To

determine the locations for the

anchors place the feet of the xture

onto your desired location and mark

points from the holes of the feet.

Self-tapping Screw

(not supplied)

Washer (not supplied)

Anchor (optional,

not supplied)

Foot

Spacer

Fixture

* Ships with a 60°optic installed.

INSTALLATION & MAINTENANCE GUIDE

–4–

www.amplighting.com

–4–

Wire Connections

Adjust Glare Guard Direction

AMP®ONE ControlProTM 200 LED Downlight

AAL-1813IR-40-BBZ

Strip both leads from the

luminaire pigtail. Using

two wire connectors (sold

separately), connect the leads

from the luminaire to the

main supply cable leads.

Pigtail

Main Supply Cable

Wire Connectors

Unlock the knob and rotate

the glare guard to your desired

direction. Hand tighten

the knob once your desired

direction is achieved.

Glare Guard

Knob

[email protected] • 813.978.3900

–5–

Install Fixture to Stake

Remove Glare Guard

Install/Replace Optic

Loosen the set screw and

remove the glare guard from

the xture.

Glare Guard

Set Screw

Fixture

Loosen the xture lens and remove

it from the xture.

Fixture Lens

Fixture

–6–

www.amplighting.com

–6–

INSTALLATION & MAINTENANCE GUIDE

AMP®ONE ControlProTM 200 LED Downlight

AAL-1813IR-40-BBZ

Replace Optic

Loosen the screws, and remove the

optic from the xture.

Install the new optic in the xture

and reverse Step 6 - Step 4. Conrm

the optic is properly aligned over the

LED board before tightening down.

Improper alignment when tightening

the screws can cause the optic to

break.

Screw

Optic

LED Board

Fixture

–6––6–

[email protected] • 813.978.3900

–7–

IS-AAL-1813IR-40-BBZ.ver1

Specications and product details subject to change without notice.

[email protected] • 813.978.3900

Help Hotline:

1-813-978-3900 • Mon-Fri 9am-6pm (EST)

www.amplighting.com

Inhaltsverzeichnis

Andere AMP Lighting Landschaftsbeleuchtung Handbücher

AMP Lighting

AMP Lighting AFL-4010-4-B-BZ Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting AAL-1012 Series Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting AAL-1024-0-B-BZ Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting AAL-1024-0-B-BZ Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting AAL-30XXIR Series Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting AFL-40 B-BZ Series Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting ASDL-2014-P-WH Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting AFL-4012-4-B-BZ Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting FoundationPro Paver Light Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting AviatorPro Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting Estate PendantPro ASI-9006-4036-B-BZ Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting TieredPro Path Light Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting PolynesianPro Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting AFL-4014-4-B-BZ Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting ASPL-3030-B-BZ Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting Wider NovellePro APL-3026-4-B-BZ Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting AxialPro APL-3025-4-B-BZ Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting InfusePro AHS- 630X-4-B-BZ Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting APL-3012-B-BZ Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting AWL-712IR-BBZ Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting AFL-4011-4-B-BZ Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting AlpinePro Path Light Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting AggregatePro AAL-1013 B-BZ Series Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting G2 ControlPro Series Bedienungs- und Sicherheitshinweise

Beliebte Landschaftsbeleuchtung Handbücher anderer Marken

Intex

Intex SL1006 Bedienungsanleitung

LED Group

LED Group ROBUS R2IN13W Bedienungsanleitung

Patriot Lighting

Patriot Lighting 343-1484 Bedienungsanleitung

LIGMAN

LIGMAN JET 44 Bedienungsanleitung

Hess

Hess SERA G: SERA S Bedienungsanleitung

LIGMAN

LIGMAN MALTA 1 Bedienungsanleitung

Cooper Lighting

Cooper Lighting Invue 42 - 175W Bedienungsanleitung

Saxby Lighting

Saxby Lighting Islay 68784 Handbuch

LIGMAN

LIGMAN EU-10016-3 Bedienungsanleitung

Cooper Lighting

Cooper Lighting McGraw-Edison ZD Credenza Bedienungsanleitung

LIGMAN

LIGMAN KI-60475 Bedienungsanleitung

Cooper Lighting

Cooper Lighting Generation CLB25MWW5C373 Bedienungsanleitung

Malibu Boats

Malibu Boats CL905K Bedienungsanleitung

LIGMAN

LIGMAN NYB-30161 Bedienungsanleitung

LIGMAN

LIGMAN SI-80021 Bedienungsanleitung

Volt

Volt 2-in-1 Tiki-Brass Torch Light Bedienungsanleitung

Malibu Boats

Malibu Boats CM110P Bedienungsanleitung

LIGMAN

LIGMAN VIENNA 1 Bedienungsanleitung