AMP Lighting MR16 HydraPro Bedienungs- und Sicherheitshinweise

AMP®Low Voltage Landscape Lighting

AMP®MR16 HydraPro™ In-Grade Light (Lamp Ready)

AWL-703-25-BBZ

INSTALLATION & MAINTENANCE GUIDE

Help Hotline:

1-813-978-3900 • Mon-Fri 9am-6pm (EST)

www.amplighting.com

AMP®MR16 HydraPro™ In-Grade Light (Lamp Ready)

AWL-703-25-BBZ

Important: Please Read Before Installation

Important: Safety Instructions

INSTALLATION & MAINTENANCE GUIDE

This xture is intended for installation in accordance with local codes and

the National Electric Code (NEC). Failure to adhere to these codes and

instructions may result in serious injury, property damage and void the

warranty.

These instructions do not intend to cover all variations in installation,

operation maintenance or mounting situations.

1. Make sure that the power is turned OFF before installing or servicing this

xture.

2. Warning: this xture is not intended to be installed within 10 feet [3

meters] of a pool, spa or fountain.

3. This xture is intended to be used only with a power supply

(transformer) rated maximum of 300 watts (25 AMPS) at 15 volts.

4. Underground Low Energy Cable must not be buried over 6” (15.2 cm) in

order to connect to the main low voltage cable.

5. Wiring connections must be made with wire connectors that are suitable

for outdoor use.

6. Position the wire connector so that it is located within 6 inches (15.2

cm) from a building structure, a luminaire, or tting.

LIGHTED LAMP IS HOT!

WARNING – TO REDUCE THE RISK OF FIRE OR INJURY TO PERSONS.

1. Turn off/unplug and allow to cool before reducing lamp.

2. Lamp gets HOT quickly!

3. Do not touch the hot lens, guard or cowl.

4. Keep lamp away from materials that may burn.

5. Do not touch lamp at any time.

6. Use a soft cloth.

7. Oil from skin may damage lamp.

8. Do not operate the xture with a damaged or missing lens or shield.

www.amplighting.com

–2–

[email protected] • 813.978.3900

Product Dimensions

–3–

Package Contents

Parts Required (sold separately)

A. (1) Fixture

B. (1) Stake

A. (1) MR16

4.25”

4”

AMP®MR16 HydraPro™ In-Grade Light (Lamp Ready)

AWL-703-25-BBZ

INSTALLATION & MAINTENANCE GUIDE

–4–

www.amplighting.com

–4–

Removing the Faceplate

Unlock the screws and remove the

faceplate, gasket, and lens from the

housing.

Gasket

Faceplate

Lens

Housing

Screw

Install/Replace Bulb

Insert the bulb with the correct

wattage and type marked on the xture

label.

CAUTION: Do not exceed maximum

wattage marked on luminaire label.

NOTE: DO NOT touch bulb with bare

hands. Use a soft cloth to handle bulb.

MR16 Bulb

Socket

[email protected] • 813.978.3900

–5–

Install Lens and Faceplate

Place the lens, gasket, and faceplate back

onto the housing. Secure them with the

screws previously removed. Hand tighten

until snug, then use a srewdriver to secure

them in a star pattern.

Screw

Housing

Lens

Faceplate

Gasket

Install Stake

Determine the desired location for

mounting the xture. Hammer the stake

into the ground until ange of stake is ush

to grade. To avoid damage to the stake,

place a board on top of the stake while

hammering.

NOTE: If the ground is hard and the stake

is difcult to install, make a crosscut

in the ground using a at shovel before

hammering the stake.

Board

Stake

Soil

Ground

–6–

www.amplighting.com

–6–

Wire Connection

Strip both leads from the luminaire pigtail. Using two wire connectors

(sold seperately), connect the leads from the luminaire to the main

supply cable.

Pigtail

Main Supply Cable

Wire Connectors

AMP®MR16 HydraPro™ In-Grade Light (Lamp Ready)

AWL-703-25-BBZ

INSTALLATION & MAINTENANCE GUIDE

Install Fixture to Stake

Clear away an area in the ground at the

wireway slot on top of the stake. Lay

the luminaire pigtail into the wireway

slot and screw the xture onto the

stake. Tighten until snug.

Fixture

Stake

Pigtail

Wireway Slot

[email protected] • 813.978.3900

–7–

Remove Ring

Loosen the screws and remove the

faceplate from the housing.

Screw

Faceplate

Housing

Install/Replace Glare Guard

Install Glare Guard

Attach the glare guard onto the

housing and secure with the screws

previously removed.

Housing

Screw

Glare Guard

is-AWL-703-BBZ-ver5.pdf

Specications and product details subject to change without notice.

[email protected] • 813.978.3900

Help Hotline:

1-813-978-3900 • Mon-Fri 9am-6pm (EST)

www.amplighting.com

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere AMP Lighting Landschaftsbeleuchtung Handbücher

AMP Lighting

AMP Lighting AHS-7003-4-B-BZ Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting AAL-1012 Series Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting APL-3024-4-B-BZ Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting AAL-30XXIR Series Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting ASAL-1025-B-BZ Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting FoundationPro Paver Light Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting APL-3032-26-4-B-BZ Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting AFL-401-LI-A-BZ Series Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting Slimline VAC-SLMTIMER1 Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting AAL-1024-0-B-BZ Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting ADL-2010 Series Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting AFL-4015-4-B-BZ Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting NovelPro APL-3021-4-B-BZ Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting VariantPro AAL-1028-0-B-BZ Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting PolynesianPro Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting PAR36 Well Light Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting APL-3012-B-BZ Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting AHS-7006-X-B-BZ Series Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting AHS-67 Series Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting AFL-40 LI-B-BZ Series Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting APL-301X-XX-4-B-BZ Series Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting G2 ControlPro Series Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting TuscanPro AHT-3517-B-BZ Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting AFL-4010-4-B-BZ Bedienungs- und Sicherheitshinweise

Beliebte Landschaftsbeleuchtung Handbücher anderer Marken

Intex

Intex SL1006 Bedienungsanleitung

LED Group

LED Group ROBUS R2IN13W Bedienungsanleitung

Patriot Lighting

Patriot Lighting 343-1484 Bedienungsanleitung

Hess

Hess SERA G: SERA S Bedienungsanleitung

LIGMAN

LIGMAN JET 44 Bedienungsanleitung

LIGMAN

LIGMAN MALTA 1 Bedienungsanleitung

Cooper Lighting

Cooper Lighting MCGRAW-EDISON WBG Bedienungsanleitung

Cooper Lighting

Cooper Lighting Invue 42 - 175W Bedienungsanleitung

Saxby Lighting

Saxby Lighting Islay 68784 Handbuch

LIGMAN

LIGMAN EU-10016-3 Bedienungsanleitung

Cooper Lighting

Cooper Lighting McGraw-Edison ZD Credenza Bedienungsanleitung

LIGMAN

LIGMAN KI-60475 Bedienungsanleitung

Cooper Lighting

Cooper Lighting Generation CLB25MWW5C373 Bedienungsanleitung

Malibu Boats

Malibu Boats CL905K Bedienungsanleitung

LIGMAN

LIGMAN NYB-30161 Bedienungsanleitung

LIGMAN

LIGMAN SI-80021 Bedienungsanleitung

Volt

Volt 2-in-1 Tiki-Brass Torch Light Bedienungsanleitung

Malibu Boats

Malibu Boats CM110P Bedienungsanleitung