Ampere Explorer Bedienungsanleitung
User Manual
Explorer / Tourer / Tourer S
www.ampereelectric.co.uk
www.ampereelectric.co.uk
Table of Contents
1. Warranty terms
2. Included in the box
3. Assembly
4. Register your warranty
5. Charging the battery
6. LCD display –how to use your e-bike controls
7. Care and maintenance
8. Modifications
Thismanualshouldbeconsideredapermanentpartofthe electric bike toolkitand
should be passed on to the next owner.
Anonlinecopyisavailableatwww.ampereelectric.co.uk/manuals
www.ampereelectric.co.uk
Warranty terms
Our Ampere warranty is clear and simple:
Main parts have a warranty of one year. This covers mechanical and electrical parts: including frame, forks,
seat, motor, controller, battery and charger.
The warranty is subject to proper care for and reasonable use of the e-bike. Components such as bulbs,
brake pads, inner tubes, tyres, chain, cables, etc. are regarded as consumables. When replacements are
Returns Policy (UK)
We hope you will be pleased with your purchase. Should you wish to return the product bought direct
from us we will be happy to refund or exchange a product provided it is in perfect condition fully and with
the original packaging. Ampere products purchased from a retailer should be returned to the retailer.
Returns should be made within a reasonable time (usually 14 days) and in original, undamaged packaging.
If we find that the product has not been returned to us in fully resalable condition, we reserve the right to
refuse a refund on the item, or deduct a reasonable amount of the original selling price from the refund.
Any refund will cover the cost of the goods, but will exclude the non-refundable delivery charge. The cost
and risk of returning goods is the responsibility of the customer. The customer should arrange shipping
back to Ampere and ensure that any parcel is adequately insured.
Faulty Goods
Faulty goods notified to us WITHIN 14 days of delivery will be collected, repaired or replaced, and delivered
free of charge. Note: At our discretion we may decide to issue a full refund instead of providing a repair or
replacement.
Faulty goods notified to us AFTER 14 days and within the warranty period are to be returned to Ampere at
the expense and risk of the customer. The customer should arrange their own shipping back to Ampere
and ensure that any parcel sent to us is adequately insured. Goods that are repaired or replaced under
warranty will be re-delivered free of charge.
Note: At our discretion we may decide to issue a refund instead of providing a repair or replacement.
Terms and Conditions
Refunds are dependent on the condition of the goods received back. Damaged or incomplete goods will
not be refunded in full. Goods damaged as a result of misuse will be subject to a repair and redelivery
charge. The customer will be advised of all chargeable repairs before such work commences. Repairs or
replacements will be made free of charge within the warranty period only where the fault is not caused by
misuse of the product or through normal wear and tear.
Parts and Servicing
We provide one year's return to base warranty on all key electrical parts: motors, batteries and specialist
components, subject to proper care, and reasonable use of the e-bikes. We also stock specialist spare parts
and batteries so you will always be able to maintain your e-bike and keep it in tip-top condition.
purchased at your local bike shop. For technical support please send details to this email address.
www.ampereelectric.co.uk
Included in the Box
1Electric Bike
2Charger
3Manual
4Pedals
5Battery
6Keys
www.ampereelectric.co.uk
Assembly
Your e-bike comes 85% assembled. To complete the assembly the handlebars, front wheel, pedals, saddle
and seat post will need to be attached. To do this, instructions with diagrams are set out in this section.
If you are having difficulty assembling the e-bike, please call your retailer for assistance. Further help is
available on our website where we publish FAQs or call our customer service team on 07877950433.
Please note –the pictures may vary from the actual product however; the process of assembly is the same.
Assembling the Stem handlebars
1. Make sure the handlebar stem is facing forwards, towards the front wheel.
2. Unscrew the 4 bolts on the stem using a 4mm Allen Key.
www.ampereelectric.co.uk
3. Place the handlebar into the handlebar stem and screw the 4 bolts in a cross-diagonal order using a
4mm Allen key.
Connect the wires by colour. All the electronic wires should be connected already. If, however,
they have become disconnected the wires should be reconnected according to colour.
Please note - Use the arrows on each end to help make sure you line them up correctly.
4
2
1
3
www.ampereelectric.co.uk
Attaching the front wheel
Loosen the pin through the middle of the wheel to allow you to place the fork onto it. Make sure the
brakedisc is properly inserted into the brake calliper.
Tighten the nut and hold the lever in an upright position as shown in the picture below. Once tight
push the lever in to secure the wheel.
Assembling the pedals
•Each of the 2 pedals is marked on the inside to identify right (R) and left (L).
To connect the pedals to the e-bike, place the left pedal into the left pedal arm and the right pedal into
the right pedal arm (left and right directions are determined by sitting on the e-bike). Tighten by turning
the pedals toward the front wheel using a 15mm spanner.
www.ampereelectric.co.uk
The right pedal is attached on the same side as the chain. Make sure you check the pedals are
tight and secure before riding.
Attaching the seat
1. Screw the saddle onto the seat post using a 6mm Allen key.
2. Slide the seat post into the seat tube.
3. Align the seat with the frame to make sure it is straight.
4. The height of the seat should not be higher than the safety line marks on the seat post.
5. Tighten the seat clamping lever.
www.ampereelectric.co.uk
Regular checks
Please check that: -
the quick release clamping lever on the seat post is secure,
the brakes are working correctly,
the tyre pressure is correct –If the tyres need pumping up, attach a bike pump to the valve (shown
in the photo below) and inflate to 40 –50 PSI.
Safe Riding
Before each ride, check that all bolts are tight, the battery has sufficient charge for your planned
journey, the charging port is covered, your tyres are correctly inflated, both your brakes are working and
your front and rear lights are working correctly.
www.ampereelectric.co.uk
Register your warranty
To register your warranty, go to www.ampereelectric.co.uk/register-warranty/ or scan the QR code
below.
To register your warranty, you will need to know your frame serial number.
The frame serial number is located on the bottom of the frame of the frame in between the pedals, it
will begin with the Letters YL.
Frame Serial number
Dieses Handbuch passt für folgende Modelle
2
Inhaltsverzeichnis
Andere Ampere Roller Handbücher
Beliebte Roller Handbücher anderer Marken
First Choice Mobility
First Choice Mobility Roma Medical Corella S741 Bedienungsanleitung
Carrera
Carrera impel Bedienungsanleitung
Afikim
Afikim Superlight SL-3 Bedienungsanleitung
CareCo
CareCo ZOOM Bedienungsanleitung
Douglas
Douglas Vespa G.S. Bedienungsanleitung
Gazelle
Gazelle with BOSCH System Bedienungsanleitung