AUTOMATED MERCHANDISING SYSTEMS INC, (304) 725-6921 / FAX 304-725-6983, www.amsvendors.com 5
GENERAL INTRODUCTION
The purpose of this manual is to give our customers a way of identifying major service parts for repair and replacement. The illustrations and parts
list in this manual are for identification only. Some optional parts are also shown.
Illustrations of these major parts are keyed with our part numbers. The illustrations help identify the general design, position and orientation of
these parts. The note section may also give important information.
Please refer to the section on merchandiser identification on the following pages. Without the model style and serial number it may be difficult to
identify the required part.
Parts should be ordered from your distributor.
It is our intent to assist our customers with up-to-date documentation. However, this manual may not show all parts, variations or changes. Some
parts may be shown out of scale. This manual is itself subject to change without notice. If any errors are found, please notify AMS so the
correction can be included in later revisions. Engineering data and third party information are generally not included. The graphical data, group
assembly data, parts, part assembly, parts breakout information and tabular data conveyed by this manual is proprietary and belongs to AMS, and
holders without prior consent of or without knowledge of and by AMS must surrender this data immediately.
All measurements are in inches except where specified as Metric.
MANUAL ORGANIZATION
This manual is divided into general sections. Each section is further divided into the various subsections or subassemblies. These lead off with
one or more illustrations showing the parts and each part is identified with a number. Note that some part numbers are for assemblies fabricated
as a unit at AMS and are replaceable only as a unit. Also, other part numbers identify optional parts which may or may not have been contracted
for and factory installed by AMS.
The part number in the illustration is listed with the description or title for that part. In some instances there may be multiple parts to choose from.
The correct service or repair part for the style of merchandiser must be selected. A quantities column in the list indicates quantities required.
There is a note section where additional information may be found.
This manual contains additional and new information for a vendor as currently manufactured. Older revisions of this manual should be kept with
older vendors.
