Analog Devices Blackfin FPGA EZ-Extender Bedienungsanleitung

Blackfin®FPGA EZ-Extender®

Manual

Revision 2.0, April 2006

Part Number

82-000920-01

Analog Devices, Inc.

One Technology Way

Norwood, Mass. 02062-9106 a

may not be reproduced in any form without prior, express written consent

from Analog Devices, Inc.

Printed in the USA.

Limited Warranty

The Blackfin FPGA EZ-Extender is warranted against defects in materials

and workmanship for a period of one year from the date of purchase from

Analog Devices or from an authorized dealer.

Disclaimer

Analog Devices, Inc. reserves the right to change this product without

prior notice. Information furnished by Analog Devices is believed to be

accurate and reliable. However, no responsibility is assumed by Analog

Devices for its use; nor for any infringement of patents or other rights of

third parties which may result from its use. No license is granted by impli-

cation or otherwise under the patent rights of Analog Devices, Inc.

Trademark and Service Mark Notice

The Analog Devices logo, Blackfin, VisualDSP++, EZ-KIT Lite, and

EZ-Extender are registered trademarks of Analog Devices, Inc.

All other brand and product names are trademarks or service marks of

their respective owners.

Regulatory Compliance

The Blackfin FPGA EZ-Extender has been certified to comply with the

essential requirements of the European EMC directive 89/336/EEC

(inclusive 93/68/EEC) and, therefore, carries the “CE” mark.

The Blackfin FPGA EZ-Extender had been appended to Analog Devices

Development Tools Technical Construction File referenced

“DSPTOOLS1” dated December 21, 1997 and was awarded CE Certifi-

cation by an appointed European Competent Body and is on file.

The EZ-KIT Lite evaluation system contains ESD

(electrostatic discharge) sensitive devices. Electro-

static charges readily accumulate on the human

body and equipment and can discharge without

detection. Permanent damage may occur on devices

subjected to high-energy discharges. Proper ESD

precautions are recommended to avoid performance

degradation or loss of functionality. Store unused

EZ-KIT Lite boards in the protective shipping

package.

Blackfin FPGA EZ-Extender Manual v

CONTENTS

PREFACE

Product Overview ........................................................................... ix

Purpose of This Manual .................................................................. xi

Intended Audience .......................................................................... xi

Manual Contents ........................................................................... xii

What’s New in This Manual ........................................................... xii

Technical or Customer Support ..................................................... xiii

Supported Products ....................................................................... xiii

Product Information ...................................................................... xiv

Related Documents .................................................................. xiv

Notation Conventions .................................................................... xvi

FPGA EZ-EXTENDER INTERFACES

FPGA EZ-Extender Setup ............................................................. 1-1

FPGA Software and Firmware ....................................................... 1-2

FPGA EZ-Extender Overview ....................................................... 1-3

FPGA EZ-EXTENDER HARDWARE REFERENCE

System Architecture ...................................................................... 2-2

Programming the FPGA ................................................................ 2-3

CONTENTS

vi Blackfin FPGA EZ-Extender Manual

FPGA Programming via JTAG ................................................ 2-4

FPGA Programming via Serial ROM ....................................... 2-5

FPGA Programming via Blackfin Application .......................... 2-6

Programming the Serial ROM ....................................................... 2-7

Serial ROM via JTAG Header ................................................. 2-7

Power ........................................................................................... 2-8

Power In Header (P12) ............................................................ 2-9

3.3V Header (P13) .................................................................. 2-9

2.5V Header (P42) ................................................................ 2-10

1.2V Header (P43) ................................................................ 2-10

Jumpers ...................................................................................... 2-11

Serial ROM Boot Jumper (JP1) ............................................. 2-12

Config Done Jumper (JP2) .................................................... 2-12

Config Program Jumper (JP3) ............................................... 2-13

Boot Jumper (JP4) ................................................................ 2-14

FPGA Input Jumpers (JP5) ................................................... 2-14

Push Buttons and LEDs .............................................................. 2-15

Program Push Button (SW1) ................................................. 2-15

PB1 Push Button (SW3) ....................................................... 2-15

PB2 Push Button (SW4) ....................................................... 2-16

Status LEDs (LED1–8) ......................................................... 2-17

Power LED (LED9) .............................................................. 2-17

Done LED (LED10) ............................................................. 2-17

Connectors ................................................................................. 2-18

Blackfin FPGA EZ-Extender Manual vii

CONTENTS

Expansion Interface (P1–3 and J1–3) ..................................... 2-19

IDC Connectors (P8, P14, P16, and P17) .............................. 2-19

IDC Connectors (P5 and P7) ................................................ 2-20

High-Speed Connector (P4) .................................................. 2-20

FPGA EZ-EXTENDER BILL OF MATERIALS

FPGA EZ-EXTENDER SCHEMATIC

Title Page .................................................................................... B-1

FPGA Configuration .................................................................... B-2

SRAM, FPGA, Banks 7 and 8 ...................................................... B-3

Expansion Interface Connector 1 .................................................. B-4

FPGA Banks 0 and 1 .................................................................... B-5

Expansion Interface Connector 2 .................................................. B-6

FPGA Banks 2 and 3 .................................................................... B-7

Expansion Interface Connector 3 .................................................. B-8

FPGA Banks 4 and 5 .................................................................... B-9

User IO ..................................................................................... B-10

Power ........................................................................................ B-11

Prototyping Area ........................................................................ B-12

INDEX

CONTENTS

viii Blackfin FPGA EZ-Extender Manual

Blackfin FPGA EZ-Extender Manual ix

PREFACE

Thank you for purchasing the Blackfin®Field-Programmable Gate Array

(FPGA) EZ-Extender®, Analog Devices, Inc. (ADI) extension board to

the EZ-KIT Lite®evaluation system for ADSP-BF533, ADSP-BF537,

and ADSP-BF561 Blackfin processors.

The Blackfin processors are embedded processors that support a Media

Instruction Set Computing (MISC) architecture. This architecture is the

natural merging of RISC, media functions, and digital signal processing

characteristics towards delivering signal processing performance in a

microprocessor-like environment.

The EZ-KIT Lite and FPGA EZ-Extender are designed to be used in con-

junction with the VisualDSP++®development environment.

VisualDSP++ offers a powerful programming tool with new flexibility that

significantly decreases the time required to port software code to a proces-

sor, reducing time-to-market.

To learn more about Analog Devices development software, go to

http://www.analog.com/processors/tools/.

Product Overview

The Blackfin FPGA EZ-Extender is a separately sold extension board that

plugs onto the expansion interface of the ADSP-BF533, ADSP-BF537, or

ADSP-BF561 EZ-KIT Lite evaluation system. The extension board aids

the design and prototyping phases of ADSP-BF533, ADSP-BF537, or

ADSP-BF561 processor targeted applications.

Product Overview

x Blackfin FPGA EZ-Extender Manual

The board extends the capabilities of the evaluation system by providing a

Xilinx FPGA with external memory, IDC connectors for off-board con-

nections, and a small bread board area.

The Blackfin FPGA EZ-Extender features:

• Xilinx Spartan III Field-Programmable Gate Array

DXC3S1000

DFG456 package

• Asynchronous static random access memory (SRAM)

DDirectly connected to FPGA

D2 MB (512K x 16 bits x 2 chips)

DTSOP44 package

• 25 MHz oscillator

DDirectly connected to global clock of FPGA

• Socket for auxiliary oscillator

DDirectly connected to global clock of FPGA

• IDC thru-hole connectors

DAllows quick access to Blackfin and FPGA pins for probing

DAllows access to Blackfin and FPGA pins for off-board

connections

• High-speed connector

DAllows access to Blackfin and FPGA pins for high-speed

application

• Expansion interface connectors

DAllows access to ADI’s family of Blackfin EZ-Extenders

Inhaltsverzeichnis

Andere Analog Devices Computerhardware Handbücher

Analog Devices

Analog Devices ADSP-BF53x Blackfin Service-Handbuch

Analog Devices

Analog Devices ADICUP3029 Bedienungsanleitung

Analog Devices

Analog Devices Linear LTM 4700 Bedienungsanleitung

Analog Devices

Analog Devices ADSP-CM419F Bedienungsanleitung

Analog Devices

Analog Devices EV-RPG2 Bedienungsanleitung

Analog Devices

Analog Devices EVAL-ADPD6000 Bedienungsanleitung

Analog Devices

Analog Devices SHARC ADSP-214 Series Anwendungshandbuch

Analog Devices

Analog Devices EVAL-ADA4351-2 Bedienungsanleitung

Analog Devices

Analog Devices EZ-KIT Lite ADSP-21364 Bedienungsanleitung

Analog Devices

Analog Devices MAX22005 Bedienungsanleitung

Analog Devices

Analog Devices LTC6955 Kurzanleitung zur Einrichtung

Analog Devices

Analog Devices EVAL-AD7715-5EB Bedienungsanleitung

Analog Devices

Analog Devices ADT7460 Bedienungsanleitung

Analog Devices

Analog Devices ADM8611 Bedienungsanleitung

Analog Devices

Analog Devices EVAL-ADAU1860 Bedienungsanleitung

Analog Devices

Analog Devices SHARC ADSP-21368 Anwendungshandbuch

Analog Devices

Analog Devices ADuCM355 Kurzanleitung

Analog Devices

Analog Devices EZ-Board ADSP-21489 Bedienungsanleitung

Analog Devices

Analog Devices ADM1060 Bedienungsanleitung

Analog Devices

Analog Devices AD73360L Bedienungsanleitung

Analog Devices

Analog Devices EVAL-ADAQ8088EBZ Bedienungsanleitung

Analog Devices

Analog Devices Linear Technology LTC6953 Kurzanleitung zur Einrichtung

Analog Devices

Analog Devices MicroConverter ADuC832 Bedienungsanleitung

Analog Devices

Analog Devices ADSP-2106x SHARC Bedienungsanleitung

Beliebte Computerhardware Handbücher anderer Marken

EMC2

EMC2 VNX Series Betriebsanleitung

Panasonic

Panasonic DV0PM20105 Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric Q81BD-J61BT11 Bedienungsanleitung

Gigabyte

Gigabyte B660M DS3H AX DDR4 Bedienungsanleitung

Raidon

Raidon iT2300 Bedienungsanleitung

National Instruments

National Instruments PXI-8186 Bedienungsanleitung

Hauppauge

Hauppauge WinTV-HVR-2250 Bedienungsanleitung

Kontron

Kontron CP6002 Bedienungsanleitung

Manhattan

Manhattan 702843 Bedienungsanleitung

Aphex

Aphex 230 Bedienungsanleitung

AMD

AMD Phenom II Betriebshandbuch

Intel

Intel NUC 12 Pro Bedienungsanleitung

dbx

dbx Zone Pro 1260 Bedienungsanleitung

Galaxy

Galaxy GHDX2-2430S-24F4D Bedienungsanleitung

Intel

Intel AXXRMFBU4 Bedienungsanleitung

Kontron

Kontron DIMM-PC/MD Bedienungsanleitung

ST X-NUCLEO-SAFEA1B Betriebsanleitung

STEINWAY LYNGDORF

STEINWAY LYNGDORF SP-1 Bedienungsanleitung