Analog Devices ICE-100B Bedienungsanleitung

ICE-100B Emulator

User Guide

Revision 1.0, September 2009

Part Number

82-000225-01

Analog Devices, Inc.

One Technology Way

Norwood, Mass. 02062-9106 a

may not be reproduced in any form without prior, express written consent

from Analog Devices, Inc.

Notice

Analog Devices, Inc. reserves the right to make changes to or to discon-

tinue any product or service identified in this publication without notice.

Analog Devices assumes no liability for Analog Devices applications assis-

tance, customer product design, customer software performance, or

infringement of patents or services described herein. In addition, Analog

Devices shall not be held liable for special, collateral, incidental or conse-

quential damages in connection with or arising out of the furnishing,

performance, or use of this product.

Analog Devices products are not intended for use in life-support

applications, devices, or systems. Use of an Analog Devices product in

such applications without the written consent of the appropriate Analog

Devices officer is prohibited.

Users are restricted from copying, modifying, distributing, reverse

engineering and reverse assembling or reverse compiling the Analog

Devices emulator operational software (one copy may be made for

back-up purposes only).

Trademark and Service Mark Notice

The Analog Devices logo, VisualDSP++, Blackfin, TigerSHARC,

SHARC, the CROSSCORE logo, EZ-KIT Lite, and EZ-ICE are regis-

tered trademarks are registered trademarks of Analog Devices, Inc.

All other brand and product names are trademarks or service marks of

their respective owners.

Regulatory Compliance

ICE-100B emulators are designed to be used solely in a laboratory envi-

ronment. The emulator is not intended to be used in any end products or

as a portion of an end product. The emulators may cause interference to

other electronic devices operating at close proximity. The emulators

should not be used in or near any medical equipment or RF devices.

The ICE-100B emulators have been certified to comply with the essential

requirements of the European EMC directive 89/336/EEC (inclusive

93/68/EEC) and, therefore, carries the “CE” mark.

The ICE-100B emulators have been appended to

Analog Devices Development Tools Technical

Construction File referenced “DSPTOOLS1” dated

December 21, 1997 and was awarded CE Certifica-

tion by an appointed European Competent Body

and is on file.

The ICE-100B emulator contains ESD (electrostatic discharge) sensitive

devices. Electrostatic charges readily accumulate on the human body and

equipment and can discharge without detection. Permanent damage may

occur on devices subjected to high-energy discharges. Proper ESD precau-

tions are recommended to avoid performance degradation or loss of func-

tionality. Store unused ICE-100B emulators in the protective shipping

package.

ICE-100B Emulator User Guide v

PREFACE

Purpose of This Manual ................................................................ viii

Intended Audience ........................................................................ viii

Manual Contents .......................................................................... viii

Technical and Customer Support ..................................................... ix

GETTING STARTED

Contents of Emulator Package ....................................................... 1-2

PC Configuration ......................................................................... 1-2

USB Installation Tasks .................................................................. 1-2

Verifying Driver Installation .................................................... 1-4

Attaching to the Emulation Target ................................................. 1-6

VisualDSP++ Configurator ............................................................ 1-8

JTAG Frequency ........................................................................... 1-8

Troubleshooting and Warranty Information ................................... 1-9

HARDWARE DESCRIPTION

LEDs ............................................................................................ 2-1

Resetting the Target ...................................................................... 2-2

To Reset the Target ................................................................. 2-3

CONTENTS

vi ICE-100B Emulator User Guide

Designing Custom Processor Boards .............................................. 2-4

Mechanical Specifications ............................................................. 2-4

SUPPORT

Technical Support ......................................................................... 3-1

Quality Assurance ......................................................................... 3-2

REFERENCES

INDEX

ICE-100B Emulator User Guide vii

PREFACE

Thank you for purchasing the ICE-100B Emulator. The ICE-100B

emulator is used in conjunction with the VisualDSP++®development

environment to create, test, and debug advanced processor application

software on Analog Devices Blackfin®processors.

The ICE-100B emulator provides state-of-the-art support for

JTAG-compliant Analog Devices processors. Key features of the

ICE-100B emulator include:

• Plug-n-Play, USB 2.0 compliant

• High-speed USB device

• USB bus-powered device

•Windows

®XP or Windows Vista operation

• Multiple processor I/O voltage support

1.8V, 2.5V, and 3.3V compliance

• Multiprocessor support

• JTAG clock operation of 5 MHz

Analog Devices carries a wide range of in-circuit emulation products.

To learn more about Analog Devices emulators, go to:

http://www.analog.com/processors/

Purpose of This Manual

viii ICE-100B Emulator User Guide

Purpose of This Manual

The ICE-100B Emulator User Guide provides directions for installing the

ICE-100B hardware and software on your PC. The manual also describes

how to configure and use the components of the ICE-100B emulators.

Intended Audience

This manual is intended to help the customer understand the features and

operation of the ICE-100B emulator so they can begin using

VisualDSP++.

Manual Contents

The manual consists of:

• Chapter 1, “Getting Started” on page 1-1

Provides software and hardware installation procedures, PC system

requirements, and basic board information.

• Chapter 2, “Hardware Description” on page 2-1

Provides information on hardware aspects of the ICE-100B

emulator.

• Chapter 3, “Support” on page 3-1

Provides technical support contact information.

• Chapter 4, “References” on page 4-1

Provides information on different resources available in developing

an application based on an Analog Devices processor.

ICE-100B Emulator User Guide ix

Preface

Technical and Customer Support

You can reach Analog Devices, Inc. Customer Support in the following

ways:

• Visit the Embedded Processing and DSP products Web site at

http://www.analog.com/processors/technical_support

• E-mail tools questions to

[email protected]

• E-mail processor questions to

[email protected] (World wide support)

[email protected] (Europe support)

[email protected] (China support)

• Phone questions to 1-800-ANALOGD

• Contact your Analog Devices, Inc. local sales office or authorized

distributor

• Send questions by mail to:

Analog Devices, Inc.

One Technology Way

P.O. Box 9106

Norwood, MA 02062-9106

USA

Technical and Customer Support

x ICE-100B Emulator User Guide

Inhaltsverzeichnis

Andere Analog Devices Computerhardware Handbücher

Analog Devices

Analog Devices EZ-Extender PWM 180-Pin Bedienungsanleitung

Analog Devices

Analog Devices ADSP-BF535 Blackfin Anwendungshandbuch

Analog Devices

Analog Devices EVAL-ADPA1106 Bedienungsanleitung

Analog Devices

Analog Devices TigerSHARC ADSP-TS201S Bedienungsanleitung

Analog Devices

Analog Devices AD5100 Bedienungsanleitung

Analog Devices

Analog Devices DC2745A Kurzanleitung zur Einrichtung

Analog Devices

Analog Devices LTC6955 Kurzanleitung zur Einrichtung

Analog Devices

Analog Devices ADM8611 Bedienungsanleitung

Analog Devices

Analog Devices ADV7604 Bedienungsanleitung

Analog Devices

Analog Devices EZ-KIT Lite ADSP-BF537 Bedienungsanleitung

Analog Devices

Analog Devices ADSP-TS101 TigerSHARC Anwendungshandbuch

Analog Devices

Analog Devices EVAL-ADA4570SDZ Bedienungsanleitung

Analog Devices

Analog Devices EVAL-ADAU1772Z Bedienungsanleitung

Analog Devices

Analog Devices Linear LTM 4700 Bedienungsanleitung

Analog Devices

Analog Devices ADICUP3029 Bedienungsanleitung

Analog Devices

Analog Devices EZ-KIT LITE ADSP-2191 Bedienungsanleitung

Analog Devices

Analog Devices Linear DC2331A-A Kurzanleitung zur Einrichtung

Analog Devices

Analog Devices UG-397 Bedienungsanleitung

Analog Devices

Analog Devices EVAL-ADA4351-2 Bedienungsanleitung

Analog Devices

Analog Devices ADSP-BF609 EZ-KIT Lite Bedienungsanleitung

Analog Devices

Analog Devices adsp-2100 Bedienungsanleitung

Analog Devices

Analog Devices EVAL-ADPD6000 Bedienungsanleitung

Analog Devices

Analog Devices ADSP-SC58 Series Anwendungshandbuch

Analog Devices

Analog Devices EVAL-LTC7067-AZ Bedienungsanleitung

Beliebte Computerhardware Handbücher anderer Marken

EMC2

EMC2 VNX Series Betriebsanleitung

Panasonic

Panasonic DV0PM20105 Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric Q81BD-J61BT11 Bedienungsanleitung

Gigabyte

Gigabyte B660M DS3H AX DDR4 Bedienungsanleitung

Raidon

Raidon iT2300 Bedienungsanleitung

National Instruments

National Instruments PXI-8186 Bedienungsanleitung

Hauppauge

Hauppauge WinTV-HVR-2250 Bedienungsanleitung

Kontron

Kontron CP6002 Bedienungsanleitung

Manhattan

Manhattan 702843 Bedienungsanleitung

Aphex

Aphex 230 Bedienungsanleitung

AMD

AMD Phenom II Betriebshandbuch

Intel

Intel NUC 12 Pro Bedienungsanleitung

dbx

dbx Zone Pro 1260 Bedienungsanleitung

Galaxy

Galaxy GHDX2-2430S-24F4D Bedienungsanleitung

Intel

Intel AXXRMFBU4 Bedienungsanleitung

Kontron

Kontron DIMM-PC/MD Bedienungsanleitung

ST X-NUCLEO-SAFEA1B Betriebsanleitung

STEINWAY LYNGDORF

STEINWAY LYNGDORF SP-1 Bedienungsanleitung