Anko M3C-D Bedienungsanleitung

Robotic Vacuum Cleaner

User Manual

Model no.: M3C-D

PLEASE READ AND SAVE THESE

INSTRUCTIONS FOR FUTURE REFERENCE

IMPORTANT SAFEGUARDS

FOR HOUSEHOLD USE ONLY.

This appliance should only be used for domestic cleaning, and must only be used

indoors, as described in this user guide.

1. Always switch off and remove the charger from the socket before cleaning the

appliance or any maintenance task.

2. This appliance is not intended for used by persons (including children) with

reduced physical, sensory or mental capabilities, or lack of experience and

knowledge, unless they have been given supervision or instruction concerning

use of the appliances by a person responsible for their safety.

3. Children should be supervised to ensure that they do not play with the

appliance.

4. If the power cord is damaged, it must be replaced by a qualified electrician in

order to avoid hazard or the appliance must be disposed of.

5. Keep hands, feet, loose clothing and hair away from rotating brush.

6. Use only the original charger supplied with the appliance.

7. Check that your supply voltage is the same as that stated on the charger.

8. When charging the appliance, the power switch must be off.

9. Never charge the batteries in temperatures above 37°C or below 0°C.

10. It is normal for the charger to become warm to the touch when charging.

11. Use only attachments provided.

12. Static electricity: some carpets can cause a small build up of static electricity. Any

static discharge is not hazardous to health.

13. To prevent damage: Do not suck up liquids or ash!

14. Do not use your appliance out of doors or on any wet surface or for wet pick up.

15. Do no spray with or pick up flammable liquids, cleaning fluids, aerosols or their

vapors.

16. Do no continue to use your appliance or charger if it appears faulty.

17. Do not leave the appliance unattended when in use.

18. Never use the appliance without the filters in place!

19. Check the filters are inserted correctly!

20. Do empty the Dust Bin regularly for optimal operation of the vacuum.

21. Do not replace the batteries with non-rechargeable batteries.

22. The vacuum must use only with provided battery charger:

YLS0241A-A165060.

WARNING: Do not recharge non-rechargeable batteries.

WARNING: Before charging the product, please make sure your hands are dry.

WARNING: Please don’t touch the rolling brush with your hands when the machine is

in function.

WARNING: Please use the charger we supplied with the appliance. Other chargers

may cause electrical failure and/or fire.

End of Product Life Battery Disposal

If the cleaner is to be disposed of, the batteries should be removed.

The battery is to be disposed safely.

Used batteries should be taken to a recycling station and not disposed of with

household waste. To remove the batteries, please proceed according to the following

inspections:

IMPORTANT! Always fully discharge the batteries before removal and ensure the

charger is unplugged.

1. Run the vacuum cleaner until it stops to fully discharge the batteries.

2. Remove the ergonomic handle and the screw in the main body to open the cleaner.

3. Remove the motor battery housing and disconnect the cables.

4. Remove the batteries form the housing.

Note: Contact your local council waste disposal service for proper disposal facilities

available for your area.

IN THE BOX

Main Body

Charging Base

Remote Control

(2*AAA Batteries required

but NOT included)

Power Adapter

Cleaning Tool

Side Brushes (x2)

HEPA filter (x2)

IMPORTANT TIPS BEFORE USE

Remove power cords and small objects from

the floor that may become entangled with

vacuum cleaner

Remove carpet or any floor covering with

fringe, they may become entangled with

vacuum cleaner.

Anti-drop sensors prevent the vacuum

cleaner from tumbling down starts and steep

drops. They may work less effectively if they

are dirty or used on reflective/ very

dark-colored floors. It is recommended that

physical barriers are used to block off areas

where the vacuum cleaner may fall

Please make sure all furniture is properly

organized so that the vacuum cleaner is

able ot clean well without becoming stuck.

GET TO KNOW YOUR ROBOTIC VACUUM

Sensors and Indicators

RREPARATION

Install the side brush before use.

Place the Charging Base on a hard, level surface and against a wall

Do not place any objects within 1.5m of the charging base, an do not place any

mirrors or other reflective objects within this range.

NOTE: If the IR signal emission window is blocked, the robot will be unable to locate

the charging dock.

Place the vacuum cleaner on top of the charging base and align the charging contacts.

The indicator flashes, that means the device is under charging. When fully

charged the indicator stay steady ON.

GETTING START

Remote Control

Functions

Home Button

Press on remote control to return the vacuum cleaner to the Charging Base.

Start/ Pause Button

Press once to start the vacuum cleaner. Press again to pause the operation.

Direction Button

Under the standby mode, press these buttons to turn left or right.

Press backward button, Vacuum will rotate 180 degree. Release button to return to

standby mode.

Press forward button, Vacuum continues forward. Release button to standby mode.

Cleaning Mode Button

There a 3-cleaning mode available: Spot Cleaning, Edge Cleaning and Auto Cleaning

mode. Before switch mode, press “Pause”button to stop operation temporarily, then select

another Cleaning Mode Button.

Suction Increase/ Decrease Button

Under ‘Auto Cleaning”mode, you can adjust the suction power by pressing Suction

Increase/ Decrease button on the remote control

Note: Remote control require 2x AAA batteries (not included)

To install the batteries, first remove the battery cover on the remote control by sliding the

battery cover back. Install the batteries in correct polarity inside the battery compartment

matching the polarity shown and then refit the battery compartment cover securely.

Battery type: “1.5V 2x AAA”. Alkaline batteries recommended.

To prevent overheating DO NOT mix new and old batteries in the remote control.

To prevent corrosion, remove the batteries if the remote control is not used for a long period of

time.

OPERATION

Before first use, charge the vacuum cleaner for 12 hours.

When Start/Pause indicator glows with steady white light, it indicates the device is fully

charged. Short press button on device or press button on remote control,

vacuum will start auto cleaning.

To change cleaning mode, press to pause the operation, then press desired

cleaning mode button to restart cleaning.

To turn the vacuum cleaner off, initially pause the cleaning then press and hold the

button on device for 4 seconds. The charge Home indicator will flash red four

times and the robot vacuum will shut down.

Cleaning mode

Spot Cleaning

The vacuum intensively cleans a specific area in a spiral

pattern, useful if there is a concentrated area of dust or

debris. When in the Spot Cleaning mode, the vacuum will

stop cleaning after 1 minute.

Edge Cleaning

The vacuum cleaner reduces its speed when it detects

a wall and then follows the wall to ensure the edge is

cleaned thoroughly.

Auto Cleaning

The vacuum cleaning will perform cleaning according

to your home environment.

No fixed direction set but will clean the whole room.

The vacuum cleaner will automatically end the cleaning session when the battery level

is too low. Home indicator flashes RED and the vacuum will begin to manoeuvre back

to the charging base.

You may manually drive the vacuum back to charging base by pressing button.

Home indicator stays RED until the vacuum parks in charging dock successfully.

Note: If the vacuum is unable to find the charging base, please help it back

home manually.

CAUTION! Too low a charge is impossible to start cleaning, always put vacuum

cleaner on charger base for charging when not in use.

Inhaltsverzeichnis

Andere anko Staubsauger Handbücher

anko

anko MC609 Bedienungsanleitung

anko

anko SL157C Bedienungsanleitung

anko

anko EV-6803-S259 Bedienungsanleitung

anko

anko VC8260-12A Bedienungsanleitung

anko

anko VC-9790 Bedienungsanleitung

anko

anko SL153B Bedienungsanleitung

anko

anko WHL-106 Bedienungsanleitung

anko

anko V8273-L-9 Bedienungsanleitung

anko

anko MT-600 Bedienungsanleitung

anko

anko VC-C001 Bedienungsanleitung

anko

anko ST01 Bedienungsanleitung

anko

anko 42713340 Bedienungsanleitung

anko

anko VCB45-16A Bedienungsanleitung

anko

anko EV-693-S296 Bedienungsanleitung

anko

anko SL163E Bedienungsanleitung

anko

anko V8311 Bedienungsanleitung

anko

anko VC8273-L-9 Bedienungsanleitung

anko

anko SL593C Bedienungsanleitung

anko

anko EV-696-S222 Bedienungsanleitung

Beliebte Staubsauger Handbücher anderer Marken

Bissell

Bissell LittleGreen Proheat 1425 Series Bedienungsanleitung

Panasonic

Panasonic MC-YL637S147-AE Bedienungsanleitung

NEFF

NEFF N17XH10 0 Series Bedienungsanleitung

LG A9 Series Bedienungsanleitung

Oreck

Oreck Cordless Captura BK51700 Series Bedienungsanleitung

Kogan

Kogan KAVACROBVWA Bedienungsanleitung

Kränzle

Kränzle VENTOS 50 ID Benutzerhandbuch

EVVO

EVVO Ai35 Bedienungsanleitung

DeWalt

DeWalt DWH200D Bedienungsanleitung

Pontec

Pontec Pondomatic Vacuum Cleaner Bedienungsanleitung

Cleanmaxx

Cleanmaxx PC-P007E Bedienungsanleitung

Exido

Exido 240-114 Bedienungsanleitung

RIDGID

RIDGID WD1685AU0 Bedienungsanleitung

Ezviz

Ezviz RE4P Bedienungsanleitung

STG global

STG global TANVAC HDV3000 Bedienungsanleitung

Shark

Shark ROTATOR PRO COMPLETE NV550 Series Bedienungsanleitung

Factory

Factory M3340 Bedienungsanleitung

Shop-Vac

Shop-Vac VN92 SERIES Bedienungsanleitung

anko M3C-D Bedienungsanleitung

Beliebte Staubsauger Handbücher anderer Marken