Anritsu MS2690A Bedienungsanleitung

Document No.: M-W3656AE-6.0

ANRITSU CORPORATION

●For safety and warning information, please read this

manual before attempting to use the equipment.

●Additional safety and warning information is provided

within the “MS2690A/MS2691A/MS2692A and

MS2830A/MS2840A/MS2850A Signal Analyzer

Operation Manual (Noise Figure Measurement

Function Operation)”. Please also refer to this

document before using the equipment.

●Keep this manual with the equipment.

MS2690A/MS2691A/MS2692A

and MS2830A/MS2840A/MS2850A

Signal Analyzer

Operation Manual

Noise Figure Measurement

Function

Remote Control

Sixth Edition

Safety Symbols

To prevent the risk of personal injury or loss related to equipment malfunction, Anritsu Corporation uses the

following safety symbols to indicate safety-related information. Ensure that you clearly understand the meanings of

the symbols BEFORE using the equipment. Some or all of the following symbols may be used on all Anritsu

equipment. In addition, there may be other labels attached to products that are not shown in the diagrams in this

manual.

Symbols used in manual

This indicates a very dangerous procedure that could result in serious injury or

death if not performed properly.

This indicates a hazardous procedure that could result in serious injury or death if

not performed properly.

This indicates a hazardous procedure or danger that could result in light-to-severe

injury, or loss related to equipment malfunction, if proper precautions are not taken.

Safety Symbols Used on Equipment and in Manual

The following safety symbols are used inside or on the equipment near operation locations to provide information

about safety items and operation precautions. Ensure that you clearly understand the meanings of the symbols and

take the necessary precautions BEFORE using the equipment.

This indicates a prohibited operation. The prohibited operation is indicated

symbolically in or near the barred circle.

This indicates an obligatory safety precaution. The obligatory operation is

indicated symbolically in or near the circle.

This indicates a warning or caution. The contents are indicated symbolically in or

near the triangle.

This indicates a note. The contents are described in the box.

These indicate that the marked part should be recycled.

MS2690A/MS2691A/MS2692A and MS2830A/MS2840A/MS2850A

Signal Analyzer

Operation Manual Noise Figure Measurement Function Remote Control

23 October 2012(First Edition)

28 April 2017(Sixth Edition)

publisher.

The contents of this manual may be changed without prior notice.

Printed in Japan

DANGER

WARNING

CAUTION

iii

Notes On Export Management

This product and its manuals may require an Export License/Approval by

the Government of the product's country of origin for re-export from you

country.

Before re-exporting the product or manuals, please contact us to confirm

whether they are export-controlled items or not.

When you dispose of export-controlled items, the products/manuals need

to be broken/shredded so as not to be unlawfully used for military purpose.

About This Manual

Associated Documents

The operation manual configuration of the MS2690A/MS2691A/MS2692A,

MS2830A, MS2840A, and MS2850A Signal Analyzer is shown below.

MS2690A/MS2691A/MS2692A and MS2830A/MS2840A/MS2850A

Signal Analyzer Operation Manual (Noise Figure Measurement Function Operation)

MS2690A/MS2691A/MS2692A and MS2830A/MS2840A/MS2850A

Signal Analyzer Operation Manual (Noise Figure Measurement Function Remote Control)

MS2690A/MS2691A/MS2692A Signal Analyzer Operation Manual

(

Main Frame O

eration

)

MS2690A/MS2691A/MS2692A and MS2830A/MS2840A/MS2850A

Signal Analyzer Operation Manual (Main Frame Remote Control)

MS2840A Signal Analyzer Operation Manual (Main Frame Operation)

MS2830A Signal Analyzer Operation Manual (Main Frame Operation)

MS2850A SignalAnalyzer Operation Manual (Main Frame Operation)

MS2690A/MS2691A/MS2692A

Signal Analyzer Operation Manual

(Signal Analyzer Function Operation)

MS2690A/MS2691A/MS2692A and MS2830A/MS2840A/MS2850A

Signal Analyzer Operation Manual (Signal Analyzer Function Remote Control)

MS2830A/MS2840A/MS2850A

Signal Analyzer Operation Manual

(SignalAnalyzer Function Operation)

MS2690A/MS2691A/MS2692A

Spectrum Analyzer Operation Manual

(SpectrumAnalyzer Function Operation)

MS2690A/MS2691A/MS2692A and MS2830A/MS2840A/MS2850A

Signal Analyzer Operation Manual (Spectrum Analyzer Function Remote Control)

MS2830A/MS2840A/MS2850A

Spectrum Analyzer Operation Manual

(Spectrum Analyzer Function Operation)

●Signal Analyzer Operation Manual (Mainframe Operation)

●Signal Analyzer Operation Manual (Mainframe Remote Control)

Description of basic operations, maintenance procedures, common

functions and common remote functions of the mainframe

●Signal Analyzer Operation Manual (SignalAnalyzer Function)

●Signal Analyzer Operation Manual (Signal Analyzer Function Remote

Control)

Description of basic operations, functions and remote functions of the

signal analyzer

●Signal Analyzer Operation Manual (Spectrum Analyzer Function)

●Signal Analyzer Operation Manual (Spectrum Analyzer Function Remote

Control)

Description of basic operations, functions and remote functions of the

spectrum analyzer

●Signal Analyzer Operation Manual (Noise Figure Measurement Function)

●Signal Analyzer Operation Manual (Noise Figure Measurement Function

Remote Control) <This document>

Description of basic operations, functions and remote functions of the Phase

Noise

III

Table of Contents

About This Manual........................................ I

Chapter 1 Overview.................................... 1-1

1.1 Overview.......................................................................1-2

1.2 Native Mode..................................................................1-4

1.3 Setting Numeric Program Data.....................................1-7

Chapter 2 SCPI Device Message Details.. 2-1

2.1 Selecting Application ....................................................2-6

2.2 Setting Frequency / Span...........................................2-12

2.3 Setting Level...............................................................2-30

2.4 Setting RBW • Average...............................................2-40

2.5 Marker.........................................................................2-48

2.6 Setting Signal Search.................................................2-60

2.7 Trace...........................................................................2-65

2.8 Calibration Setting ......................................................2-70

2.9 Setting Correction.......................................................2-78

2.10 Setting DUT mode ....................................................2-102

2.11 Execute measurement and query results.................2-104

2.12 Save / Load Files......................................................2-117

2.13 Setting Convert.........................................................2-123

2.14 Setting External LO...................................................2-135

Chapter 3 SCPI Status Register................ 3-1

3.1 Querying Measurement Status.....................................3-2

3.2 Questionable Status Register.......................................3-3

3.3 Operation Status:Register ..........................................3-14

3.3 Utility...........................................................................3-19

IV.

Chapter 1 Overview

1-1

Overview

This chapter provides an overview of the remote control of the Noise

Figure Measurement Function (hereinafter, referred to as “this

application”).

1.1 Overview ....................................................................... 1-2

1.1.1 Interface............................................................ 1-2

1.1.2 Controlled Application....................................... 1-3

1.2 Native Mode.................................................................. 1-4

1.3 Setting Numeric Program Data..................................... 1-7

Chapter 1 Overview

1-2

1.1 Overview

This application can be controlled from an external controller (PC) by

remote control commands using the MS2690/MS2691/MS2692A,

MS2830A, MS2840A, or MS2850A Signal Analyzer (hereinafter, referred

to as “this instrument”). The remote control commands are defined by the

SCPI format.

1.1.1 Interface

This instrument has GPIB, Ethernet, and USB interfaces for remote

control. Those interfaces cannot be used at the same time.

The interface is automatically determined when a command is received

at the start of communication. This instrument enters the remote state

after the interface has been determined. The front panel lamp

lights during remote interface operation, and goes off during

local-interface operation.

Refer to the

MS2690A/MS2691A/MS2692A and

MS2830A/MS2840A/MS2850A Signal Analyzer Operation Manual

(Mainframe Remote Control)

for more details of the basic operations for

remote control, such as interface setting.

Andere Handbücher für MS2690A

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Anritsu Messgerät Handbücher

Anritsu

Anritsu MS27100A Bedienungsanleitung

Anritsu

Anritsu Spectrum Master MS2712E Bedienungsanleitung

Anritsu

Anritsu ML2400A Series Bedienungsanleitung

Anritsu

Anritsu Spectrum Master MS2711D Betriebsanleitung

Anritsu

Anritsu MT8820A Bedienungsanleitung

Anritsu

Anritsu MD1230B Bedienungsanleitung

Anritsu

Anritsu Spectrum Master Bedienungsanleitung

Anritsu

Anritsu Field Master Pro MS2090A Bedienungsanleitung

Anritsu

Anritsu AM-9000 Series Bedienungsanleitung

Anritsu

Anritsu MT8820C Bedienungsanleitung

Anritsu

Anritsu MP1595A Bedienungsanleitung

Anritsu

Anritsu Field Master Pro MS2090A Bedienungsanleitung

Anritsu

Anritsu VectorStar ME7828A Series Bedienungsanleitung

Anritsu

Anritsu MS27101A-IBCM Bedienungsanleitung

Anritsu

Anritsu Site Master S251C Bedienungsanleitung

Anritsu

Anritsu VNA Master MS2024B Bedienungsanleitung

Anritsu

Anritsu Spectrum Master MS2721B Bedienungsanleitung

Anritsu

Anritsu Microwave Site Master S820E Bedienungsanleitung

Anritsu

Anritsu FieldMaster MS2080A Bedienungsanleitung

Anritsu

Anritsu MT8802A Bedienungsanleitung

Anritsu

Anritsu VNA master Bedienungsanleitung

Anritsu

Anritsu MP1632C Bedienungsanleitung

Anritsu

Anritsu Spectrum Master MS2721B Betriebsanleitung

Anritsu

Anritsu BTS Master MT8220T Betriebsanleitung

Beliebte Messgerät Handbücher anderer Marken

Suaoki

Suaoki D40 Bedienungsanleitung

Elster

Elster BK-G1.6 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Deltabar FMD71 Handbuch

Duratool

Duratool D03128 Bedienungsanleitung

Vega

Vega VEGAPULS 65 Bedienungsanleitung

Tonghui

Tonghui TH2618B Bedienungsanleitung

Tenmars

Tenmars TM-801 Bedienungsanleitung

MSR

MSR 145 Bedienungsanleitung

TPS

TPS WP-82 Bedienungsanleitung

ELMETRON

ELMETRON CP-511 Bedienungsanleitung

PCB Piezotronics

PCB Piezotronics 003C30 Bedienungsanleitung

Tenma

Tenma 72-10465 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Proline Promag 50 Technische Daten

Siemens

Siemens SITRANS F Coriolis FCT030 Stücklistenhandbuch

KLINGER

KLINGER CMF V Series Bedienungsanleitung

EXFO

EXFO FTB-2 Bedienungs- und Wartungshandbuch

Keysight

Keysight M8290A Bedienungsanleitung

ADTEK

ADTEK MW-5 Bedienungsanleitung