Anritsu MS462 Series Bedienungsanleitung

SERIES MS462XX

VECTOR NETWORK MEASUREMENT SYSTEM

VERIFICATION KITS

OPERATION AND

MAINTENANCE MANUAL

P/N: 10100-00036

REVISION: A

PRINTED: MAY 1999

490 JARVIS DRIVE lMORGAN HILL, CA 95037-2809

WARRANTY

The ANRITSU product(s) listed on the title page is (are) warranted against defects in

materials and workmanship for one year from the date of shipment.

ANRITSU’s obligation covers repairing or replacing products which prove to be defective

during the warranty period. Buyers shall prepay transportation charges for equipment

returned to ANRITSU for warranty repairs. Obligation is limited to the original purchaser.

ANRITSU is not liable for consequential damages.

LIMITATION OF WARRANTY

The foregoing warranty does not apply to ANRITSU connectors that have failed due to

normal wear. Also, the warranty does not apply to defects resulting from improper or

inadequate maintenance by the Buyer, unauthorized modification or misuse, or operation

outside of the environmental specifications of the product. No other warranty is expressed or

implied, and the remedies provided herein are the Buyer’s sole and exclusive remedies.

TRADEMARK ACKNOWLEDGEMENTS

V Connector, K Connector, and AutoCal are registered trademarks of ANRITSU Company

Windows 3.1 and Windows 95 are registered trademarks of Microsoft Corporation.

MS-DOS is a registered trademark of Microsoft Corporation.

Acrobat Reader is a registerd trademark of Adobe Corporation.

NOTICE

ANRITSU Company has prepared this manual for use by ANRITSU Company personnel and

customers as a guide for the proper installation, operation and maintenance of ANRITSU

Company equipment and computer programs. The drawings, specifications, and information

contained herein are the property of ANRITSU Company, and any unauthorized use or

disclosure of these drawings, specifications, and information is prohibited; they shall not be

reproduced, copied, or used in whole or in part as the basis for manufacture or sale of the

equipment or software programs without the prior written consent of ANRITSU Company.

Table of Contents

Chapter 1 Contents and Operation

1-1 INTRODUCTION . . . . . . . . . . . . . . . . . . . . . . 1-1

1-2 PURPOSE. . . . . . . ...................1-1

1-3 ONLINE MANUALS. ....................1-1

1-4 KIT CONTENTS . . . . . . . . . . . . . . . . . . . . . . 1-1

Model 3663LF (Type N) Verification Kit .............1-2

Model 3666LF (3.5 mm) Verification Kit .............1-3

Model 3667LF (GPC-7) Verification Kit .............1-4

1-5 OPERATION . . . . ....................1-5

Chapter 2 Performance Verification

2-1 GENERAL. . . . . . . ...................2-1

2-2 VERIFICATION PROCESS . . . . . . . . . . . . . . . . . 2-2

2-3 FACTORS AFFECTING VERIFICATION PERFORMANCE . 2-2

Cables ...............................2-2

Sliding Loads............................2-2

Preview the Display ........................2-3

Chapter 3 Maintenance Instructions

3-1 INTRODUCTION . . . . . . . . . . . . . . . . . . . . . . 3-1

3-2 PRECAUTIONS FOR USING CONNECTORS . . . . . . . . 3-1

Pin Depth..............................3-1

Pin Depth Tolerance ........................3-2

Over Torquing Connectors ....................3-3

Teflon Tuning Washers ......................3-3

Mechanical Shock .........................3-3

3-3 CLEANING INSTRUCTIONS . . . . . . . . . . . . . . . . 3-3

360X/37XXX VK OMM i/ii

Chapter 1

Contents and Operation

1-1 INTRODUCTION This chapter lists the contents of the verification kits.

NOTE

The components in these kits of the highest quality and

accuracy. All components are NIST (National Institute of

Standards Technology) traceable, which means that the

components are very accurate and repeatable. Handle with

care.

1-2 PURPOSE The verification kits let you verify the performance of a calibrated vec-

tor network measurement system. The components in these kits are

based upon standards that are traceable to the NIST. They provide the

basis for issuing a calibration certification label.

1-3 ONLINE MANUALS This manual is available on CD ROM as an Adobe Acrobat™ (*.pdf)

file. The file can be viewed using Acrobat Reader™, a free program

that is also available on the CD ROM. This file is “linked” such that

the viewer can choose a topic to view from the displayed “bookmark”

list and “jump” to the manual page on which the topic resides. The

text can also be word-searched. CD ROM part numbers are available

on ANRITSU’s Internet home page (http://www.global.anritsu.com).

You can also contact ANRITSU Customer Service for price and avail-

ability.

1-4 KIT CONTENTS Contents of the verification kits are listed on the following pages

MS462XX VK OMM 1-1

Model 3663LF

(Type N) Verification

Kit

This kit (Figure 1-1) includes the following items:

Index 1 Verification Kit disks

Index 2 42N-50, 50 dB Attenuator

Index 3 42N20, 20 dB Attenuator

Index 4 42NOP-20, N Mismatch Attenuator

CAUTION

The disk included in the Verification Kit is for use by AN-

RITSU service personnel. It contains component data used

during the automated verification procedure that is accom-

plished with an external PC. It is NOT INTENDED TO

BE USED WITH ANRITSU MS462XX internal floppy

disk drive.

1-2 MS462XX VK OMM

KIT VERIFICATION

CONTENTS KITS

ANRITSU46XX-XX

DC-10 Ghz10 OhM

SER.NO XXXXXX

ANRITSU46XX-XX

DC-10 Ghz10 OhM

SER.NO XXXXXX

42NOP-20

DC-8 GHZ

S/N XXXXXX

VERIFICATION KIT

MODEL 3883LF

MS462XX COMPONENT

VERIFICATION COEFFICIENTS

VERIFICATION KIT SER NO XXXXXX

Figure 1-1. Model 3663LF (Type N) Verification Kit Components

Model 3666LF

(3.5 mm)

Verification Kit

This kit (Figure 1-2) includes the following items:

Index 1 Verification Kit disks

Index 2 42L-50, 20 dB Attenuator

Index 3 42L-20, 50 dB Attenuator

Index 4 42LOP-20, 3.5 mm Mismatch Attenuator

CAUTION

The disk included in the Verification Kit is for use by

ANRITSU service personnel. It contains component data

used during the automated verification procedure that is

accomplished with an external PC. It is NOT INTENDED

TO BE USED WITH WITRON MS462XX internal floppy

disk drive.

MS462XX VK OMM 1-3

VERIFICATION KIT

KITS CONTENTS

VERIFICATION KIT

MODEL 3883LF

MS462XX COMPONENT

VERIFICATION COEFFICIENTS

VERIFICATION KIT SER NO XXXXXX

42L-20

42L-50

42LOP-20

Figure 1-2. Model 3666LF (SMA/3.5) Verification Kit Components

Model 3667LF

(GPC-7)

Verification Kit

This kit (Figure 1-3) includes in the following items:

Index 1 Verification Kit disks

Index 2 42A-50, 50 dB Attenuator

Index 3 42A-20, 20 dB Attenuator

Index 4 42AOP-20, GPC-7 Mismatch Attenuator

CAUTION

The disk included in the Verification Kit is for use by

ANRITSU service personnel. It contains component data

used during the automated verification procedure that is

accomplished with an external PC. It is NOT INTENDED

TO BE USED WITH ANRITSU MS462XX internal floppy

disk drive.

1-4 MS462XX VK OMM

KIT VERIFICATION

CONTENTS KITS

VERIFICATION KIT

MODEL 3883LF

MS462XX COMPONENT

VERIFICATION COEFFICIENTS

VERIFICATION KIT SER NO XXXXXX

42AOP-20

DC-6 GHZ

S/N XXXXXX

42A-50

DC-18 GHZ

S/N XXXXXX

42A-20

DC-18 GHZ

S/N XXXXXX

Figure 1-3. Model 3667LF (GPC 7) Verification Kit Components

1-5 OPERATION Each verification kit consists of three standards, each are supplied

with S-parameter data. Each standard verifies a primary S-parameter,

as follows:

q20 dB Attenuator — S21,S

12 Magnitude and Phase

q50 dB Attenuator — S21,S

12 Magnitude and Phase

qMismatch Attenuator — S11,S

22 Magnitude

Uncertainty windows are provided at each data point. The uncertainty

associated with the primary S-parameter for each device is small. Con-

versely, the uncertainty window can be large for some of the other

S-parameter data.

MS462XX VK OMM 1-5/1-6

VERIFICATION KIT

KITS CONTENTS

Inhaltsverzeichnis

Andere Anritsu Messgerät Handbücher

Anritsu

Anritsu 11 Series Betriebsanleitung

Anritsu

Anritsu MS2690A Bedienungsanleitung

Anritsu

Anritsu FieldMaster MS2080A Bedienungsanleitung

Anritsu

Anritsu MS2690A Installationshandbuch

Anritsu

Anritsu MT8820A Bedienungsanleitung

Anritsu

Anritsu Site Master S820D Bedienungsanleitung

Anritsu

Anritsu Field Master Bedienungsanleitung

Anritsu

Anritsu Site Master Bedienungsanleitung

Anritsu

Anritsu VectorStar ME7838 4 Series Bedienungsanleitung

Anritsu

Anritsu LMR Master Bedienungsanleitung

Anritsu

Anritsu MS2830A Bedienungsanleitung

Anritsu

Anritsu Spectrum Master MS2712E Bedienungsanleitung

Anritsu

Anritsu PIM Master MW82119A Bedienungsanleitung

Anritsu

Anritsu VNA Master MS2026C Bedienungsanleitung

Anritsu

Anritsu BTS Master MT8220T Betriebsanleitung

Anritsu

Anritsu MP1220A Bedienungsanleitung

Anritsu

Anritsu Spectrum Master Bedienungsanleitung

Anritsu

Anritsu S331E Bedienungsanleitung

Anritsu

Anritsu MS2691A Bedienungsanleitung

Anritsu

Anritsu MS2687B Bedienungsanleitung

Anritsu

Anritsu Spectrum Master MS2711E Bedienungsanleitung

Anritsu

Anritsu MS2711B Bedienungsanleitung

Anritsu

Anritsu CMA 5000 - UTA Bedienungsanleitung

Anritsu

Anritsu MT1000A Network Master Pro Bedienungsanleitung

Beliebte Messgerät Handbücher anderer Marken

Suaoki

Suaoki D40 Bedienungsanleitung

Elster

Elster BK-G1.6 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Deltabar FMD71 Handbuch

Duratool

Duratool D03128 Bedienungsanleitung

Vega

Vega VEGAPULS 65 Bedienungsanleitung

Tonghui

Tonghui TH2618B Bedienungsanleitung

Tenmars

Tenmars TM-801 Bedienungsanleitung

MSR

MSR 145 Bedienungsanleitung

TPS

TPS WP-82 Bedienungsanleitung

PCB Piezotronics

PCB Piezotronics 003C30 Bedienungsanleitung

Tenma

Tenma 72-10465 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Proline Promag 50 Technische Daten

Siemens

Siemens SITRANS F Coriolis FCT030 Stücklistenhandbuch

KLINGER

KLINGER CMF V Series Bedienungsanleitung

Keysight

Keysight M8290A Bedienungsanleitung

Acterna

Acterna MS1400 Bedienungsanleitung

R&S

R&S ZPH Bedienungsanleitung

Datacolor

Datacolor ColorReader DC10-2 Bedienungsanleitung