Anritsu MX900030A Bedienungsanleitung

Document No.: M-W3690AE-5.0

ANRITSU CORPORATION

MX900030A

Connector Master

Operation Manual

For safety and warning information, please read this

manual before attempting to use the equipment.

Keep this manual with the equipment.

Fifth Edition

Safety Symbols

To prevent the risk of personal injury or loss related to equipment malfunction, Anritsu Corporation uses the following

safety symbols to indicate safety-related information. Ensure that you clearly understand the meanings of the

symbols BEFORE using the equipment. Some or all of the following symbols may be used on all Anritsu equipment.

In addition, there may be other labels attached to products that are not shown in the diagrams in this manual.

Symbols used in manual

This indicates a very dangerous procedure that could result in serious injury or

death if not performed properly.

This indicates a hazardous procedure that could result in serious injury or death if

not performed properly.

This indicates a hazardous procedure or danger that could result in light-to-severe

injury, or loss related to equipment malfunction, if proper precautions are not taken.

Safety Symbols Used on Equipment and in Manual

The following safety symbols are used inside or on the equipment near operation locations to provide information

about safety items and operation precautions. Ensure that you clearly understand the meanings of the symbols and

take the necessary precautions BEFORE using the equipment.

This indicates a prohibited operation. The prohibited operation is indicated

symbolically in or near the barred circle.

This indicates an obligatory safety precaution. The obligatory operation is indicated

symbolically in or near the circle.

This indicates a warning or caution. The contents are indicated symbolically in or

near the triangle.

This indicates a note. The contents are described in the box.

These indicate that the marked part should be recycled.

MX900030A

Connector Master

Operation Manual

11 March 2014 (First Edition)

25 September 2020 (Fifth Edition)

publisher.

The operational instructions of this manual may be changed without prior notice.

Printed in Japan

DANGER

WARNING

CAUTION

iii

Equipment Certificate

Anritsu Corporation guarantees that this equipment was inspected at

shipment and meets the published specifications.

Anritsu Warranty

●During the warranty period, Anritsu Corporation will repair or exchange

this software free-of-charge if it proves defective when used as described

in the operation manual.

●The warranty period is 6 months from the purchase date.

●The warranty period after repair or exchange will remain 6 months from

the original purchase date, or 30 days from the date of repair or exchange,

depending on whichever is longer.

●This warranty does not cover damage to this software caused by Acts of

God, natural disasters, and misuse or mishandling by the customer.

In addition, this warranty is valid only for the original equipment purchaser. It

is not transferable if the equipment is resold.

Anritsu Corporation shall assume no liability for damage or financial loss of

the customer due to the use of or a failure to use this equipment, unless the

damage or loss is caused due to Anritsu Corporation’s intentional or gross

negligence.

Anritsu Corporation Contact

In the event of this equipment malfunctions, please contact an Anritsu

Service and Sales office. Contact information can be found on the last page

of the printed version of this manual, and is available in a separate file on the

PDF version.

Notes On Export Management

This

product and its manuals may require an Export License/Approval by

the Government of the product's country of origin for re

-export from your

country.

Before re

-exporting the product or manuals, please contact us to confirm

whether they are export

-controlled items or not.

When you dispose of export

controlled items, the products/manuals need

to be broken/shredded so as not to be unlawfully used for military

purpose.

Software End-User License Agreement (EULA)

Please carefully read and accept this Software End-User License Agreement (hereafter this EULA)

before using (includes executing, copying, installing, registering, etc.) this Software (includes programs,

databases, scenarios, etc., used to operate, set, etc., Anritsu electronic equipment, etc.). By using this

Software, you shall be deemed to have agreed to be bound by the terms of this EULA, and Anritsu

Corporation (hereafter Anritsu) hereby grants you the right to use this Software with the Anritsu

specified equipment (hereafter Equipment) for the purposes set out in this EULA.

Article 1. Grant of License and Limitations

1. You may not to sell, transfer, rent, lease, lend,

disclose, sublicense, or otherwise distribute

this Software to third parties, whether or not

paid therefor.

2. You may make one copy of this Software for

backup purposes only.

3. You are not permitted to reverse engineer,

disassemble, decompile, modify or create

derivative works of this Software.

4. This EULA allows you to install one copy of

this Software on one piece of Equipment.

Article 2. Disclaimers

To the extent not prohibited by law, in no

event shall Anritsu be liable for direct, or any

incidental, special, indirect or consequential

damages whatsoever, including, without

limitation, damages for loss of profits, loss of

data, business interruption or any other

commercial damages or losses, and damages

claimed by third parties, arising out of or

related to your use or inability to use this

Software, unless the damages are caused due

to Anritsu’s intentional or gross negligence.

Article 3. Limitation of Liability

1. If a fault (bug) is discovered in this Software,

failing this Software to operate as described

in the operation manual or specifications

even though you have used this Software as

described in the manual, Anritsu shall at its

own discretion, fix the bug, or replace the

software, or suggest a workaround,

free-of-charge, provided, however, that the

faults caused by the following items and any

of your lost or damaged data whatsoever

shall be excluded from repair and the

warranty.

i) If this Software is deemed to be used for

purposes not described in the operation

manual or specifications.

ii) If this Software has been used in

conjunction with other

non-Anritsu-approved software.

iii) If this Software or the Equipment has

been modified, repaired, or otherwise

altered without Anritsu's prior

approval.

iv) For any other reasons out of Anritsu's

direct control and responsibility, such

as but not limited to, natural disasters,

software virus infections, or any devices

other than this Equipment, etc.

2. Expenses incurred for transport, hotel, daily

allowance, etc., for on-site repairs or

replacement by Anritsu engineers

necessitated by the above faults shall be

borne by you.

3. The warranty period for faults listed in

Section 1 of this Article shall be either 6

months from the date of purchase of this

Software or 30 days after the date of repair

or replacement, whichever is longer.

Article 4. Export Restrictions

You shall not use or otherwise export or

re-export directly or indirectly this Software

except as authorized by the laws and

regulations of Japan and the United States,

etc. In particular, this Software shall not be

exported or re-exported (a) into any Japan or

US embargoed countries or (b) to anyone

restricted by the Japanese export control

regulations, or the US Treasury

Department's list of Specially Designated

Nationals or the US Department of

Commerce Denied Persons List or Entity

List. In using this Software, you warrant

that you are not located in any such

embargoed countries or on any such lists.

You also agree that you will not use or

otherwise export or re-export this Software

for any purposes prohibited by the Japanese

and US laws and regulations, including,

without limitation, the development, design

and manufacture or production of missiles or

nuclear, chemical or biological weapons of

mass destruction, and conventional weapons.

Article 5. Change of Terms

Anritsu may change without your approval

the terms of this EULA if the changes are for

the benefit of general customers, or are

reasonable in light of the purpose of this

EULA and circumstances of the changes. At

the time of change, Anritsu will inform you of

those changes and its effective date, as a

general rule 45 days, in advance on its

website, or in writing or by e-mail.

Article 6. Termination

1. Anritsu may terminate this EULA

immediately if you violate any conditions

described herein. This EULA shall also be

terminated immediately by Anritsu if there

is any good reason that it is deemed difficult

to continue this EULA, such as your

violation of Anritsu copyrights, patents, etc.

or any laws and ordinances, or if it turns out

that you belong to an antisocial organization

or has a socially inappropriate relationship

with members of such organization.

2. You and Anritsu may terminate this EULA

by a written notice to the other party 30 days

in advance.

Article 7. Damages

If Anritsu suffers any damages or loss,

financial or otherwise, due to your violation

of the terms of this EULA, Anritsu shall have

the right to seek proportional damages from

you.

Article 8. Responsibility after Termination

Upon termination of this EULA in

accordance with Article 6, you shall cease all

uses of this Software immediately and shall

as directed by Anritsu either destroy or

return this Software and any backup copies,

full or partial, to Anritsu.

Article 9. Negotiation for Dispute

Resolution

If matters of interpretational dispute or

items not covered under this EULA arise,

they shall be resolved by negotiations in good

faith between you and Anritsu.

Article 10. Governing Law and Court of

Jurisdiction

This EULA shall be governed by and

interpreted in accordance with the laws of

Japan without regard to the principles of the

conflict of laws thereof, and any disputes

arising from or in relation to this EULA that

cannot be resolved by negotiation described

in Article 9 shall be subject to and be settled

by the exclusive agreed jurisdiction of the

Tokyo District Court of Japan.

Revision History:

February 29th, 2020

vii

Protection Against Computer Virus Infections

Prior to the software installation

Before installing this software or any other software recommended or

approved by Anritsu, run a virus scan on your computer, including

removable media (e.g. USB flash drive and CF memory card) you

want to connect to your computer.

When using this

software and connecting with the measuring instrument

●Copying files and data

On your computer, do not save any copies other than the following:

-Files and data provided by Anritsu

-Files created by this software

-Files specified in this document

Before copying these files and/or data, run a virus scan, including

removable media (e.g. USB flash drive and CF memory card).

●Connecting to network

Connect your computer to the network that provides adequate

protection against computer viruses.

●Protection against malware (malicious software such as viruses).

To connect your computer to network, the following is advised.

-Activate Firewall.

-Install important updates of Windows.

Use antivirus software.

Cautions on Proper Operation of Software

This software may not operate normally if any of the following operations

are performed

on your computer:

●Simultaneously running any software other than that recommended

or approved by Anritsu

●Closing the lid (Laptop computer)

●Turning on the screen saver function

●Turning on the battery-power saving function (Laptop computer)

For how to turn off the functions, refer to the

operation manual that came

with your computer.

viii

About This Manual

This manual explains how to use the MX900030A Connector Master.

For safety precautions and operation of the fiber scope, refer to the

G0306A Visual Inspection Probe Operation Manual

G0306B Visual

Inspection Probe Operation Manual.

II.

Table of Contents

About This Manual................................................ I

Chapter 1 Outline..............................................1-1

1.1 Outline...........................................................................1-2

1.2 Recommendable Operating Environment ....................1-4

1.3 Configuration.................................................................1-4

Chapter 2 Installation .......................................2-1

2.1 Installation.....................................................................2-2

2.2 Uninstallation ................................................................2-3

Chapter 3 Operation .........................................3-1

3.1 Starting and Quitting Software......................................3-2

3.2 Main Window ................................................................3-3

3.3 Fiber Endface Display...................................................3-6

3.4 Analyzing Image of Fiber Endface................................3-8

3.5 Creating a Report .......................................................3-12

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Anritsu Prüfgeräte Handbücher

Anritsu

Anritsu MT8870A Bedienungsanleitung

Anritsu

Anritsu MX183000A Bedienungsanleitung

Anritsu

Anritsu MG3641A Bedienungsanleitung

Anritsu

Anritsu OSL Series Gebrauchs- und Pflegehandbuch

Anritsu

Anritsu MT1000A Network Master Pro Bedienungsanleitung

Anritsu

Anritsu MT9810B Bedienungsanleitung

Anritsu

Anritsu 681XXC Bedienungsanleitung

Anritsu

Anritsu Network Master Series Bedienungsanleitung

Anritsu

Anritsu MP1590B Bedienungsanleitung

Anritsu

Anritsu MP1590B-30 Bedienungsanleitung

Anritsu

Anritsu MT9812B Bedienungsanleitung

Anritsu

Anritsu MG3681A Bedienungsanleitung

Anritsu

Anritsu MT8860C Bedienungsanleitung

Anritsu

Anritsu BERTWave MP2100B Bedienungsanleitung

Anritsu

Anritsu MN469xC Series Bedienungsanleitung

Anritsu

Anritsu MD1230B-26 Bedienungsanleitung

Anritsu

Anritsu MT1000A Network Master Pro Bedienungsanleitung

Anritsu

Anritsu ME7840A Bedienungsanleitung

Anritsu

Anritsu LMR Master S412E Betriebsanleitung

Anritsu

Anritsu Precision AutoCal 36585 Series Bedienungsanleitung

Anritsu

Anritsu MT9810A Bedienungsanleitung

Anritsu

Anritsu MT1000A Network Master Pro Bedienungsanleitung

Anritsu

Anritsu Precision AutoCal 36585 Series Bedienungsanleitung

Anritsu

Anritsu MD8480A Bedienungsanleitung

Beliebte Prüfgeräte Handbücher anderer Marken

SMART

SMART KANAAD SBT XTREME 3G Series Bedienungsanleitung

Agilent Technologies

Agilent Technologies BERT Serial Bedienungsanleitung

Agilent Technologies

Agilent Technologies N3280A Bedienungsanleitung

Vernier

Vernier Go Direct Voltage Bedienungsanleitung

Lifeloc

Lifeloc R.A.D.A.R. Bedienungsanleitung

Fluke

Fluke T5-600 Bedienungs- und Montageanleitung

Mercury

Mercury TSL01 Bedienungsanleitung

MAHA

MAHA MBT Series Bedienungsanleitung

Fuji Electric

Fuji Electric P-61 Bedienungsanleitung

ETC

ETC SealerAtor Bedienungsanleitung

Skyfine

Skyfine ETHYWAY V2 Bedienungsanleitung

Appion

Appion G5 Twin Bedienungsanleitung

PCB Piezotronics

PCB Piezotronics 8159-0112A Bedienungsanleitung

BW Technologies

BW Technologies MicroDock II Bedienungsanleitung

Sun Nuclear

Sun Nuclear 1027 Bedienungsanleitung

Biomark

Biomark HPR LITE READER Bedienungsanleitung

Hioki

Hioki 3169-20 Bedienungsanleitung

Ashcroft

Ashcroft ATE-100 Bedienungsanleitung