ANTAIRA LMX-0800G Series Bedienungsanleitung

Antaira Technologies

- Industrial Ethernet Switches

LMX-0800G Series User Manual V1.0

LMX-0800G Series

8-Port Industrial Gigabit Managed Ethernet Switch,

with 8*10/100/1000Tx Ethernet Ports

Version 1.2

Hardware Manual

Antaira Technologies - Industrial Ethernet Switches

LMX-0800G Series Hardware Manual V1.2

This document contains information, which is protected by copyright. Reproduction, adaptation or translation

without prior permission is prohibited, except as allowed under the copyright laws.

Trademark Information

Antaira is a registered trademark of Antaira Technologies, LLC, Microsoft Windows and the Windows logo are the

trademarks of Microsoft Corp. NetWare is the registered trademark of Novell Inc. WMM and WPA are the

registered trademarks of Wi-Fi Alliance. All other brand and product names are trademarks or registered

trademarks of their respective owners.

translation without prior permission of Antaira Technologies, LLC is prohibited, except as allowed under the

Disclaimer

Antaira Technologies, LLC provides this manual without warranty of any kind, expressed or implied, including but

not limited to the implied warranties of merchantability and fitness for a particular purpose. Antaira Technologies,

LLC may make improvements and/or changes to the product and/or specifications of the product described in this

manual, without prior notice. Antaira Technologies, LLC will not be liable for any technical inaccuracies or

typographical errors found in this guide. Changes are periodically made to the information contained herein and

will be incorporated into later versions of the manual. The information contained is subject to change without prior

notice.

Antaira Technologies - Industrial Ethernet Switches

LMX-0800G Series Hardware Manual V1.2

III

FCC Warning

This equipment has been tested and found to comply with the limits for a Class-A digital device, pursuant to Part

15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a

residential installation. This equipment generates, uses, and can radiate radio frequency energy. It may cause

harmful interference to radio communications if the equipment is not installed and used in accordance with the

instructions. However, there is no guarantee that interference will not occur in a particular installation. If this

equipment does cause harmful interference to radio or television reception, which can be determined by turning

the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following

measures:



Reorient or relocate the receiving antenna.



Increase the separation between the equipment and receiver.



Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.



Consult the dealer or an experienced radio/TV technician for help.

Caution: Any changes or modifications not expressly approved by the grantee of this device could void the user's

authority to operate the equipment.

CE Mark Warning

This is a Class-A product. In a domestic environment this product may cause radio interference in which case the

user may be required to take adequate measures.

Industrial Ethernet Switches

Industrial Grade Gigabit Managed Ethernet Switches

Hardware Manual

Version 1.2 (March 2018)

This manual supports the following models:



LMX-0800G



LMX-0800G-T

This document is the current official release manual. Please check our website (www.antaira.com) for any

updated manual or contact us by e-mail ([email protected]).

Antaira Technologies - Industrial Ethernet Switches

LMX-0800G Series Hardware Manual V1.2

Table of Contents

Introduction ................................................................. 1

1.1

Product Overview 1

1.2

Product Software Features 1

1.3

Product Hardware Features 2

1.4

Package Contents 3

1.5

Safety Precaution 3

Hardware Description ................................................. 4

2.1

Physical Dimensions 4

2.2

Front Panel 5

2.3

Top View 5

2.4

LED Indicators 7

2.5

Reset Button 7

2.6

Ethernet Ports 8

2.7

Cabling 9

2.8

Wiring the Power Inputs 10

2.9

Wiring the Fault Alarm Contact 10

2.10 Grounding Note 11

Mounting Installation ................................................. 12

3.1

DIN-Rail Mounting 12

3.2

Wall Mounting 13

Hardware Installation ................................................ 14

4.1

Installation Steps 14

4.2

Maintenance and Service 14

Technical Specifications .......................................... 16

Antaira Technologies - Industrial Ethernet Switches

LMX-0800G Series Hardware Manual V1.2

Introduction

All Antaira industrial managed switches come with a pre-installed “user-friendly” web console

interface, which allows users to easily configure and manage the units, whether one is using a serial

console and command line interface(CLI) commands like Telnet, SSH, HTTP (Web GUI) or simple

network management protocols (SNMP).

1.1

Product Overview

Antaira Technologies’ LMX-0800G series

is an 8-port industrial gigabit managed Ethernet switch

that is embedded with eight gigabit Ethernet ports. It supports Jumbo Frame up to 9.6K for huge

Ethernet data packet transmissions. It is a fully manageable Layer 2 Ethernet switch that is pre-

loaded with a user-friendly web management console design. It supports the ring network redundancy

function using the market’s open standard ITU-T G.8032 ERPS (Ethernet Ring Protection Switch)

protocol that has a <50ms network recovery time. The advanced network filtering and security

functions, such as, IGMP, VLAN, QoS, SNMP, RMON, Modbus TCP, and 802.1X/HTTPS/SSH/SSL

increase determinism and improve network management for remote SCADA systems or control

networks.

The LMX-0800G series is a compact, IP30 rated, and DIN-rail or wall mountable. There are also two

different models for varying operating temperatures, for either a standard temperature range (STD: -

10°C to 70°C) or an extended temperature range (EOT: -40°C to 75°C). It also provides high EFT and

ESD protection for industrial networking applications, such as, power/utility, water wastewater,

oil/gas/mining, factory automation, security surveillance, ITS and any other outdoor or harsh

environment.

1.2

Product Software Features



Network Redundancy





STP, RSTP, MSTP, ITU-T G.8032 Ethernet Ring Protection Switch (ERPS) for

network redundancy



Network Management





Web UI based management, SNMP v1/v2/v3, Serial Console



Qos, traffic classification QoS, Cos, bandwidth control for Ingress and Egress,

broadcast storm control, Diffserv



IEEE802.1q VLAN tagging, port-based VLAN support

Antaira Technologies - Industrial Ethernet Switches

LMX-0800G Series Hardware Manual V1.2



IGMP snooping v1/v2, IGMP filtering / throttling, IGMP query up to 256 group



Supports IPv4/IPv6, RMON, MIB II, port mirroring, event syslog, DNS, NTP/SNTP,

HTTPS, SSH/SSL, TFTP



MODBUS TCP for SCADA system integration



Port Configuration





Status, statistics, mirroring, rate limiting, event syslog



Event Handling





Event notification by Email: Cold/Warm Start, Power Failure, Authentication, SNMP

trap and Fault Alarm Relay Output



Software Upgrade via TFTP and HTTP





Configuration Backup – USB Port



1.3

Product Hardware Features



System Interface and Performance





All RJ-45 ports support Auto MDI/MDI-X Function



Embedded 8*10/100/1000Tx Gigabit RJ45 Ports



Store-and-forward switching architecture



8K MAC address table



Power line EFT protection: 2,000VDC; Ethernet ESD protection: 6,000VDC



Power Input





DC 12~48V redundant with a 6-pin removal terminal block



One user programmable alarm relay contact



The power input specification is complied with the requirements of SELV (Safety Extra Low

Voltage), and the power supply should be complied with UL 61010-1 & UL 61010-2-201



Operating Temperature





Standard operating temperature models: -10°C to 70°C



Extended operating temperature models: -40°C to 75°C



Case/Installation





IP-30 protection metal housing



DIN-Rail and wall mount design



Installation in a Pollution Degree 2 industrial environment

Antaira Technologies - Industrial Ethernet Switches

LMX-0800G Series Hardware Manual V1.2

1.4

Package Contents



1– LMX-0800G series: 8-port industrial gigabit managed Ethernet switch, with

8*10/100/1000Tx ports





1-Product CD





DIN Rail Kit & 2-Wall mounting brackets and screws





1-RJ45 to DB9 Serial Console cable





1-DC cable –18 AWG & DC jack 5.5x2.1mm



1.5

Safety Precaution

Attention:

If the DC voltage is supplied by an external circuit, please use a protection

device on the power supply input. The industrial Ethernet switch’s

hardware specs, ports, cabling information, and wiring installation will be

described within this user manual.

Warning Labels

The caution label means that you should check the certain information on user manual when working

with the device. (Shown in Figure 1.1)

Figure 1.1 - Caution Label

This warning label is on the device, and means that the surface of the device is hot. (Shown

in Figure 1.2)

Figure 1.2 - Hot Surface Warning Label

Antaira Technologies - Industrial Ethernet Switches

LMX-0800G Series Hardware Manual V1.2

Hardware Description

2.1

Physical Dimensions

Figure 2.1, below, shows the physical dimensions of Antaira’s LMX-0800G series: 8-port industrial

gigabit managed Ethernet switches with 8*10/100/1000Tx RJ45 Ethernet ports.

(W x D x H) is

54mm x 99mm x 142mm

Figure 2.1

LMX-0800G Series Physical Dimensions

Antaira Technologies - Industrial Ethernet Switches

LMX-0800G Series Hardware Manual V1.2

2.2

Front Panel

The front panel of the LMX-0800G series industrial gigabit managed Ethernet switch is shown

below in Figure 2.2.

6-Pin Removal Terminal Block (Power Input)

Grounding Screw

LED for PWR1, PWR2, and Fault

LAN Port #5~8 – 10/100/1000Tx

Hard (Physical) Reset Button

Console Port

USB Backup

LAN Port (1~4) 10/100/1000Tx

LED for 1000Tx network speed Status

LED for 10/100Tx network speed Status

Figure 2.2

The Front Panel of LMX-0800G Series

2.3

Top View

Figure 2.3, below, shows the top panel of the LMX-0800G series switch that is equipped

with one 6-pin removal terminal block connector for dual DC power inputs 12~48VDC.

Figure 2.3

Top Panel View of LMX-0800G Series

Antaira Technologies - Industrial Ethernet Switches

LMX-0800G Series Hardware Manual V1.2

2.4

LED Indicators

There are LED light indicators located on the front panel of the industrial Ethernet switch that

display the power status and network status. Each LED indicator has a different color and has

its own specific meaning, see below in Table 2.1.

LED

Color

Description

Green

Power input 1 is active

Off

Power input 1 is inactive

Green

Power input 2 is active

Off

Power input 2 is inactive

Fault

Green/

Red

Green

Power input 1 or 2 is inactive

Red

An applied alarm (such as port disconnect) has been

triggered

Off

Power input 1 and 2 are both functional, and no

active/port alarm is detecting errors

Owner

Green

ERPS Owner Mode (Ring Master) is ready

Off

ERPS Owner Mode is not active

Ring

Green

Ring Network is active

Off

Ring Network is not active

LAN Port 1 ~ 8

(Left LED)

Green

Connected to network, 1000Mbps

Flashing

Networking is active

Off

Not connected to network

LAN Port 1~ 8

(Right LED)

Green

Networking is active, 100/10Mbps

Flashing

Networking is active

Off

Not connected to network

Table 2.1 - LED Indicators for LMX-0800G Series

Caution: "P1" is the abbreviation for "Power ", “P2” is for “Power 2”, “LNK” is for “Link”, and "ACT"

is for "Activity".

2.5

Reset Button

There is a Reset button located on the front panel of the industrial Ethernet switch that helps

users to reboot, restore default, or save running configurations by pressing the button for different

seconds. Please refer to Table 2.2 for the timing and function.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere ANTAIRA Netzwerk-Router Handbücher

ANTAIRA

ANTAIRA STE-6104C-T-V2 Bedienungsanleitung

ANTAIRA

ANTAIRA LNX-800N Bedienungsanleitung

ANTAIRA

ANTAIRA LMP-0602 24-V2 Series Bedienungsanleitung

ANTAIRA

ANTAIRA LMP-0602 Series Bedienungsanleitung

ANTAIRA

ANTAIRA LMP-0600 Series Bedienungsanleitung

ANTAIRA

ANTAIRA LMP-0702G-SFP-24-V2 Series Bedienungsanleitung

ANTAIRA

ANTAIRA ARS-7235-5E-AC Series Bedienungsanleitung

ANTAIRA

ANTAIRA LMP-0602-24-V2 Series Bedienungsanleitung

ANTAIRA

ANTAIRA LMP-0601G-SFP-24-V2 Series Bedienungsanleitung

ANTAIRA

ANTAIRA LMX-0602 Series Bedienungsanleitung

ANTAIRA

ANTAIRA LNX-1600G Series Bedienungsanleitung

ANTAIRA

ANTAIRA LMP-1202M-SFP Series Bedienungsanleitung

ANTAIRA

ANTAIRA LMX-2004G-SFP Series Bedienungsanleitung

ANTAIRA

ANTAIRA LNX-802AG-S10-T Bedienungsanleitung

ANTAIRA

ANTAIRA LNP-1202G-SFP Series Bedienungsanleitung

ANTAIRA

ANTAIRA LMP-1600G-M12-67-110 Series Bedienungsanleitung

ANTAIRA

ANTAIRA LRX-0200 Series Bedienungsanleitung

ANTAIRA

ANTAIRA LNP-C500G Bedienungsanleitung

ANTAIRA

ANTAIRA LNP-2804GN-SFP-T Bedienungsanleitung

ANTAIRA

ANTAIRA ARS-7235-5E-AC Series Bedienungsanleitung

ANTAIRA

ANTAIRA LNX-800AG Bedienungsanleitung

ANTAIRA

ANTAIRA LMP-1202G-SFP Series Bedienungsanleitung

ANTAIRA

ANTAIRA LMX-0500 Series Bedienungsanleitung

ANTAIRA

ANTAIRA LNX-1802G-T Bedienungsanleitung

Beliebte Netzwerk-Router Handbücher anderer Marken

Allnet

Allnet ALL0333AU Bedienungsanleitung

HomeSeer

HomeSeer HT-SEL Bedienungsanleitung

Sercomm

Sercomm Genesis OC3505D Bedienungsanleitung

Billion

Billion BIPAC 5102 Series Bedienungsanleitung

TP-Link

TP-Link TD-8817 Bedienungsanleitung

Motorola

Motorola MR1900 Bedienungsanleitung

Digi

Digi IX14 Bedienungsanleitung

Cisco

Cisco NCS 540 Handbuch

XAVi

XAVi X8821e Bedienungsanleitung

BEC

BEC 6200WZL Bedienungsanleitung

MikroTik

MikroTik hAP ac3 Series Bedienungsanleitung

Korenix

Korenix JetNet 5428G Series Bedienungsanleitung

NETGEAR

NETGEAR FS526T - Switch Bedienungsanleitung

Automated Logic

Automated Logic ZN551 Betriebsanleitung

Cisco

Cisco ASR 1000 Series Bedienerhandbuch

EnGenius

EnGenius ESR-9710 Bedienungsanleitung

Cisco

Cisco 805 Series Bedienungs- und Sicherheitshinweise

LevelOne

LevelOne FBR-1416 Bedienungsanleitung