ANTAIRA LMP-0600 Series Bedienungsanleitung

Antaira Industrial Ethernet Switches

LMP-0600 Series User Manual V1.0

LMP-0600 Series

6-Port Industrial PoE+ Managed Ethernet Switches

4*10/100Tx (30W/Port), 2*10/100Tx, 48~55VDC Power Input

User Manual

Version 1.0

Antaira Industrial Ethernet Switches

LMP-0600 Series User Manual V1.0

This document contains information, which is protected by copyright. Reproduction, adaptation or translation

without prior permission is prohibited, except as allowed under the copyright laws.

Trademark Information

Antaira is a registered trademark of Antaira Technologies, LLC, Microsoft Windows and the Windows logo are the

trademarks of Microsoft Corp. NetWare is the registered trademark of Novell Inc. WMM and WPA are the

registered trademarks of Wi-Fi Alliance. All other brand and product names are trademarks or registered

trademarks of their respective owners.

translation without prior permission of Antaira Technologies, LLC is prohibited, except as allowed under the

Disclaimer

Antaira Technologies, LLC provides this manual without warranty of any kind, expressed or implied, including but

not limited to the implied warranties of merchantability and fitness for a particular purpose. Antaira Technologies,

LLC may make improvements and/or changes to the product and/or specifications of the product described in this

manual, without prior notice. Antaira Technologies, LLC will not be liable for any technical inaccuracies or

typographical errors found in this guide. Changes are periodically made to the information contained herein and

will be incorporated into later versions of the manual. The information contained is subject to change without prior

notice.

Antaira Industrial Ethernet Switches

LMP-0600 Series User Manual V1.0

iii

FCC Warning

This equipment has been tested and found to comply with the limits for a Class-A digital device, pursuant to Part

15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a

residential installation. This equipment generates, uses, and can radiate radio frequency energy. It may cause

harmful interference to radio communications if the equipment is not installed and used in accordance with the

instructions. However, there is no guarantee that interference will not occur in a particular installation. If this

equipment does cause harmful interference to radio or television reception, which can be determined by turning

the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following

measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

Consult the dealer or an experienced radio/TV technician for help.

Caution: Any changes or modifications not expressly approved by the grantee of this device could void the user's

authority to operate the equipment.

CE Mark Warning

This is a Class-A product. In a domestic environment this product may cause radio interference in which case the

user may be required to take adequate measures.

Industrial Ethernet Switches

Industrial Grade Gigabit Unmanaged Ethernet Switches

User Manual

Version 1.0 (September 2014)

This manual supports the following models:

LMP-0600

LMP-0600-T

This document is the current official release manual. Please check our website (www.antaira.com) for any

updated manual or contact us by e-mail ([email protected]).

Antaira Industrial Ethernet Switches

LMP-0600 Series User Manual V1.0

Table of Contents

1. Introduction................................................................................................ 1

1.1 Product Overview .......................................................................... 1

1.2 Product Software Features............................................................ 1

1.3 Product Hardware Features........................................................... 2

1.4 Package Contents.........................................................................2

1.5 Safety Precaution.......................................................................... 3

2. Hardware Description ............................................................................... 4

2.1 Physical Dimensions….................................................................. 4

2.2 Front Panel………………………………………………………………5

2.3 Top View........................................................................................ 5

2.4LED Indicators ............................................................................... 6

2.5Ethernet Ports................................................................................6

2.6 Cabling .......................................................................................... 8

2.7 Wiring the Power Inputs................................................................. 8

2.8 Wiring the Fault Alarm Contact...................................................... 9

3.Mounting Installation............................................................................... 10

3.1DIN-Rail Mounting........................................................................ 10

3.2Wall Mounting.............................................................................. 11

4.Hardware Installation............................................................................... 12

4.1Installation Steps.......................................................................... 12

5.Web Management .................................................................................... 13

5.1 Web Console Configuration......................................................... 13

5.1.1 About Web-based Management ............................................ 13

5.2 Basic Setting................................................................................ 14

5.2.1 System Information................................................................ 14

5.2.2 Admin &Password..................................................................15

5.2.3 IP Setting ............................................................................... 16

5.2.4 System Time.......................................................................... 17

5.3 Port Management........................................................................ 18

Antaira Industrial Ethernet Switches

LMP-0600 Series User Manual V1.0

5.3.1 Port Status............................................................................. 18

5.3.2 Port Configuration.................................................................. 18

5.4 PoE (Power-over-Ethernet) ......................................................... 19

5.4.1 PoE Configuration.................................................................. 19

5.4.2 Ping Alarm .............................................................................20

5.4.3 PoE Schedule........................................................................21

5.5 ERPS........................................................................................... 22

5.5.1 ERPS Status.......................................................................... 23

5.5.2 ERPS Configuration............................................................... 23

5.6 Spanning Tree............................................................................. 30

5.6.1 RSTP Status ..........................................................................31

5.6.2 RSTP Configuration............................................................... 31

5.6.3 MSTI Status ........................................................................... 33

5.6.4 MSTI Configuration................................................................ 34

5.7. 802.1Q VLAN ............................................................................. 36

5.7.1 802.1Q VLAN Settings........................................................... 36

5.7.2 802.1Q VLAN Settings........................................................... 37

5.8. IGMP Snooping .......................................................................... 37

5.8.1IGMP Settings ........................................................................ 38

5.8.2IGMP Snooping Status Table................................................. 39

5.9 QoS (Traffic Prioritization) ........................................................... 39

5.9.1 QoS Classification..................................................................40

5.9.2 CoS Mapping.........................................................................41

5.9.3 ToS Mapping.......................................................................... 42

5.10Port Mirroring............................................................................. 43

5.11SNMP……….............................................................................. 44

Antaira Industrial Ethernet Switches

LMP-0600 Series User Manual V1.0

5.11.1SNMP Agent.........................................................................44

5.11.2SNMP Trap setting............................................................... 45

5.12System Warning......................................................................... 46

5.12.1Syslog Setting ...................................................................... 46

5.12.2 System Event Log................................................................ 47

5.12.3SMTP Setting ....................................................................... 48

5.12.4Event Selection ....................................................................49

5.12.5Fault Alarm…....................................................................... 49

5.13MAC Table…. ............................................................................ 50

5.13.1 MAC Address Table............................................................. 50

5.13.2 MAC Table Configuration..................................................... 50

5.14 Maintenance.............................................................................. 51

5.14.1 Upgrade ............................................................................... 51

5.14.2 Reboot ................................................................................. 52

5.14.3 Default.................................................................................. 52

5.15Configuration.............................................................................. 52

5.15.1Save……….. ........................................................................ 53

5.15.2Backup & Store .................................................................... 53

5.15.3 Auto Load & Backup ............................................................ 54

5.16Logout……… ............................................................................. 54

6.Command Line Interface Management.................................................. 55

6.1 About CLI Management............................................................ 55

7. Technical Specifications......................................................................... 72

Antaira Industrial Ethernet Switches

LMP-0600 Series User Manual V1.0

1. Introduction

All Antaira industrial managed switches come with a pre-installed “user friendly” web console interface,

which allows users to easily configure and manage the units, whether one is using a serial console

and command line interface(CLI) commands like Telnet, SSH, HTTP (Web GUI) or simple network

management protocols (SNMP).

1.1 Product Overview

Antaira’s LMP-0600 series is a 6-port industrial PoE+ managed Ethernet switch that is IEEE

802.3at complaint (power-over-Ethernet plus), and is embedded with four 10/100Tx Ethernet

ports that support either IEEE802.3af or IEEE802.3at for a maximum of 30 watts per port, and two

10/100Tx Fast Ethernet ports. It is a fully manageable industrial Ethernet switch that supports the

standard Layer 2 Ethernet configurable settings. This product series is IP30 rated and DIN-rail

mountable that provides a standard operating temperature range (-10°C to 70°C) and an

extended operating temperature range (-40°C to 75°C). It also designed with high EFT and ESD

protection to prevent any unregulated voltage for industrial networking applications in process

control automation, intelligent transportation systems (ITS), power/utility, water wastewater

treatment plants, any outdoor or harsh environment.

1.2 Product Software Features

Network Redundancy

STP, RSTP, MSTP, ITU-T G.8032 Ethernet Ring Protection Switch (ERPS) for

network redundancy

Network Management

Web UI based management, SNMP v1/v2, serial console

Qos, traffic classification QoS, Cos, bandwidth control for Ingress and Egress,

broadcast storm control, Diffserv

IEEE802.1q VLAN, port-based VLAN support

IGMP snooping v1/v2, IGMP filtering / throttling, IGMP query up to 256 group

Supports RMON, MIB II, port mirroring, event syslog, DNS, NTP/SNTP, SSH/SSL,

TFTP

Advanced PoE Ports Management (Auto Ping Check)

Auto powered device (PD) detection

Antaira Industrial Ethernet Switches

LMP-0600 Series User Manual V1.0

Auto reset (cycle power to unresponsive PD)

PoE ports weekly power scheduling

Port Configuration

Status, statistics, mirroring, rate limiting, event syslog

Event Handling

Event notification by email: cold/warm start, power failure, authentication, SNMP trap

and fault alarm relay output

Software Upgrade via TFTP and HTTP

Configuration Backup –USB Port

1.3 Product Hardware Features

System Interface and Performance

All RJ-45 ports support auto MDI/MDI-X function

Embedded 4*10/100Tx (PSE 30W/Port) RJ45 Ports, and 2*10/100Tx Fast Ethernet ports

Store-and-forward switching architecture

8K MAC address table

Power line EFT protection: 2,000VDC; Ethernet ESD protection: 6,000VDC

Power Input

DC 48~55V redundant with a 6-pin removal terminal block

One user programmable alarm relay contact

Operating Temperature

Standard operating temperature models: -10°C to 70°C

Extended operating temperature models: -40°C to 75°C

Case/Installation

IP-30 protection metal housing

Installation in pollution degree to environment

DIN-Rail and wall mount design

1.4 Package Contents

1–LMP-0600 series: 6-port industrial PoE+ managed Ethernet switch, with 4*10/100Tx

(30W/Port) RJ45 Ports, and 2*10/100Tx Fast Ethernet ports.

1-Product CD

2-Wall mounting brackets and screws

1-RJ45 to DB9 Serial Console Cable

Antaira Industrial Ethernet Switches

LMP-0600 Series User Manual V1.0

1-DC cable –18 AWG & DC jack 5.5x2.1mm

1.5 Safety Precaution

Attention: If the DC voltage is supplied by an external circuit, please use a protection

device on the power supply input. The industrial Ethernet switch’s

hardware specs, ports, cabling information, and wiring installation will be

described within this user manual.

Antaira Industrial Ethernet Switches

LMP-0600 Series User Manual V1.0

2. Hardware Description

2.1 Physical Dimensions

Figure 2.1, below, shows the physical dimensions of Antaira’s LMP-0600 series: 6-port industrial

PoE+ managed Ethernet switch with 4*10/100Tx (30W/Port) RJ45 ports, and 2*10/100Tx RJ45

ports.

(W x D x H) is 46mm x 99mm x 142mm

Figure2.1

LMP-0600 Series Physical Dimensions

Andere Handbücher für LMP-0600 Series

Inhaltsverzeichnis

Andere ANTAIRA Netzwerk-Router Handbücher

ANTAIRA

ANTAIRA LNX-800AG Bedienungsanleitung

ANTAIRA

ANTAIRA LNP-1204GN-T Bedienungsanleitung

ANTAIRA

ANTAIRA LNP-2004G-SFP Series Bedienungsanleitung

ANTAIRA

ANTAIRA LMX-0800G Series Bedienungsanleitung

ANTAIRA

ANTAIRA LNX-802AG-S10-T Bedienungsanleitung

ANTAIRA

ANTAIRA LMP-0602 Series Bedienungsanleitung

ANTAIRA

ANTAIRA LMP-1600G-M12-67-110 Series Bedienungsanleitung

ANTAIRA

ANTAIRA LMP-1202G-SFP Series Bedienungsanleitung

ANTAIRA

ANTAIRA LMP-0702G-SFP-V2 Series Bedienungsanleitung

ANTAIRA

ANTAIRA ARY-7235-AC-PD Bedienungsanleitung

ANTAIRA

ANTAIRA LMX-0602 Series Bedienungsanleitung

ANTAIRA

ANTAIRA ARX-7235-AC-PD-T Bedienungsanleitung

ANTAIRA

ANTAIRA LNX-0802C-SFP Series Bedienungsanleitung

ANTAIRA

ANTAIRA LMP-1002C-SFP Series Bedienungsanleitung

ANTAIRA

ANTAIRA LMP-0601G-SFP-24-V2 Series Bedienungsanleitung

ANTAIRA

ANTAIRA LNP-1604G-SFP Series Installations- und Betriebshandbuch

ANTAIRA

ANTAIRA LNX-500A Bedienungsanleitung

ANTAIRA

ANTAIRA LMP-1202M-SFP Series Bedienungsanleitung

ANTAIRA

ANTAIRA LMP-0602 24-V2 Series Bedienungsanleitung

ANTAIRA

ANTAIRA LNP-0500G-BT Series Bedienungsanleitung

ANTAIRA

ANTAIRA LMP-0702G-SFP-bt-24-V2 Series Bedienungsanleitung

ANTAIRA

ANTAIRA LNX-1600G Series Bedienungsanleitung

ANTAIRA

ANTAIRA LNX-501AG-SFP-T Bedienungsanleitung

ANTAIRA

ANTAIRA LNX-1202G-SFP Series Bedienungsanleitung

Beliebte Netzwerk-Router Handbücher anderer Marken

Allnet

Allnet ALL0333AU Bedienungsanleitung

HomeSeer

HomeSeer HT-SEL Bedienungsanleitung

Sercomm

Sercomm Genesis OC3505D Bedienungsanleitung

Billion

Billion BIPAC 5102 Series Bedienungsanleitung

TP-Link

TP-Link TD-8817 Bedienungsanleitung

Motorola

Motorola MR1900 Bedienungsanleitung

Digi

Digi IX14 Bedienungsanleitung

Cisco

Cisco NCS 540 Handbuch

XAVi

XAVi X8821e Bedienungsanleitung

BEC

BEC 6200WZL Bedienungsanleitung

MikroTik

MikroTik hAP ac3 Series Bedienungsanleitung

Korenix

Korenix JetNet 5428G Series Bedienungsanleitung

NETGEAR

NETGEAR FS526T - Switch Bedienungsanleitung

Automated Logic

Automated Logic ZN551 Betriebsanleitung

Cisco

Cisco ASR 1000 Series Bedienerhandbuch

EnGenius

EnGenius ESR-9710 Bedienungsanleitung

Cisco

Cisco 805 Series Bedienungs- und Sicherheitshinweise

LevelOne

LevelOne FBR-1416 Bedienungsanleitung