ANTAIRA LNP-1604G-SFP Series Installations- und Betriebshandbuch

Antaira Technologies - Industrial Ethernet Switches

LNP-1604G-SFP Series User Manual V1.0

LNP-1604G-SFP Series

16-Port Industrial Gigabit PoE+ Unmanaged Ethernet Switches with

12*10/100/1000Tx (PSE: 30W/Port) + 4*100/1000 SFP Slots

Version 1.0

User Manual

Antaira Technologies - Industrial Ethernet Switches

LNP-1604G-SFP Series User Manual V1.0

This document contains information, which is protected by copyright. Reproduction, adaptation or translation

without prior permission is prohibited, except as allowed under the copyright laws.

Trademark Information

Antaira is a registered trademark of Antaira Technologies, LLC, Microsoft Windows and the Windows logo are the

trademarks of Microsoft Corp. NetWare is the registered trademark of Novell Inc. WMM and WPA are the

registered trademarks of Wi-Fi Alliance. All other brand and product names are trademarks or registered

trademarks of their respective owners.

translation without prior permission of Antaira Technologies, LLC. is prohibited, except as allowed under the

Disclaimer

Antaira Technologies, LLC. provides this manual without warranty of any kind, expressed or implied, including but

not limited to the implied warranties of merchantability and fitness for a particular purpose. Antaira Technologies,

LLC. may make improvements and/or changes to the product and/or specifications of the product described in

this manual, without prior notice. Antaira Technologies, LLC. will not be liable for any technical inaccuracies or

typographical errors found in this guide. Changes are periodically made to the information contained herein and

will be incorporated into later versions of the manual. The information contained is subject to change without prior

notice.

Antaira Technologies - Industrial Ethernet Switches

LNP-1604G-SFP Series User Manual V1.0

iii

FCC Notice

This equipment has been tested and found to comply with the limits for a Class-A digital device, pursuant to Part

15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a

residential installation. This equipment generates, uses, and can radiate radio frequency energy. It may cause

harmful interference to radio communications if the equipment is not installed and used in accordance with the

instructions. However, there is no guarantee that interference will not occur in a particular installation. If this

equipment does cause harmful interference to radio or television reception, which can be determined by turning

the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following

measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

Consult the dealer or an experienced radio/TV technician for help.

Caution: Any changes or modifications not expressly approved by the grantee of this device could void the user's

authority to operate the equipment.

CE Mark Warning

This is a Class-A product. In a domestic environment this product may cause radio interference in which case the

user may be required to take adequate measures.

Industrial Ethernet Switches

Industrial Grade Unmanaged Ethernet Switches

User Manual

Version 1.0 (March 2017)

This manual supports the following models:

LNP-1604G-SFP

LNP-1604G-SFP-T

This document is the current official release manual. Please check our website (www.antaira.com) for any

updated manual or contact us by e-mail ([email protected]).

Antaira Technologies - Industrial Ethernet Switches

LNP-1604G-SFP Series User Manual V1.0

Table of Contents

1.Overview....................................................................... 1

1.1 Key Features...................................................... 1

1.2 Package Contents.............................................. 2

1.3 Safety Precaution............................................... 2

2.Hardware Description ................................................. 3

2.1 Physical Dimensions.......................................... 3

2.2 Front Panel ........................................................ 4

2.3 Top View............................................................ 4

2.4LED Indicators.................................................... 5

2.5 Ethernet Ports.................................................... 6

2.6 Cabling............................................................... 7

2.7 Wiring the Power Inputs..................................... 9

2.8 Wiring the Fault Alarm Contact.......................... 9

3.Mounting Installation ................................................ 10

3.1 DIN-Rail Mounting............................................ 10

3.2 Wall Mounting .................................................. 11

4.Hardware Installation................................................ 12

4.1 Installation Steps.............................................. 12

5.Network Applications................................................ 13

6. Trouble Shooting ...................................................... 14

7. Technical Specifications.......................................... 15

Antaira Technologies - Industrial Ethernet Switches

LNP-1604G-SFP Series User Manual V1.0

1. Overview

Antaira Technologies’ LNP-1604G-SFP industrial gigabit PoE+ unmanaged Ethernet switch

series has twelve 10/100/1000TX RJ45 ports that support IEEE 802.3af/at PoE/PoE+ standards

supplying up to 30 watts per port. The device also has four dual rate (100/1000) SFP slots for

fiber connection. It is IP30 rated design with both DIN-Rail and wall mounting options.

It is ideal for applications that require high density port connections with full high PoE power

outputs, wide network bandwidth, and multiple gigabit fiber connections. The LNP-1604G-SFP

series works well in industrial applications such as, security video surveillance, GigE machine

vision, process control automation and intelligent transportation.

This product series provides high EFT and ESD protection with a redundant power input support

of 48~55VDC. There are two wide operating temperature models to support either a -10 to 70˚C

or - 40 to 75˚C environment.

1.1 Key Features

System Interface/Performance

All RJ-45 ports support the auto MDI/MDI-X function

Ethernet connectivity with 12*10/100/1000Tx (PSE: 30W/Port) RJ45 ports

Fiber connectivity with 4*100/1000 Dual rate SFP slots

Store-and-forward switching architecture

8K MAC address table

Jumbo frame support up to 12.2K

Power line EFT protection: 2,000VDC; Ethernet ESD protection: 6,000VDC

Power Input

DC 48~55V redundant power, with a 6-pin removal terminal block

Operating Temperature

Standard operating temperature model: -10°C ~ 70°C

Extended operating temperature model (–T): -40°C ~ 75°C

Case/Installation

IP-30 protection

DIN-Rail and wall mount design

Antaira Technologies - Industrial Ethernet Switches

LNP-1604G-SFP Series User Manual V1.0

1.2 Package Contents

1 - LNP-1604G-SFP (-T): 16-port industrial gigabit PoE+ unmanaged Ethernet switch

with 12*10/100/1000Tx + 4*100/1000 SFP slots

2 - Wall mounting brackets and screws

1 - DC cable –18 AWG & DC jack 5.5x2.1mm

1.3 Safety Precaution

Attention: If the DC voltage is supplied by an external circuit, please use a protection

device on the power supply input. The industrial Ethernet switch’s

hardware specs, ports, cabling information, and wiring installation will be

described within this user manual.

Antaira Technologies - Industrial Ethernet Switches

LNP-1604G-SFP Series User Manual V1.0

2. Hardware Description

2.1 Physical Dimensions

Figure 2.1, below, shows the physical dimensions of Antaira Technologies’ LNP-1604G-SFP

series: 16-port industrial Gigabit PoE+ unmanaged Ethernet switches with 12*10/100/1000Tx (PSE:

30W/Port) + 4*100/1000 SFP slots.

(W x D x H) is 59mm x 99mm x 142mm

Figure 2.1

LNP-1604G-SFP Series Physical Dimensions

Antaira Technologies - Industrial Ethernet Switches

LNP-1604G-SFP Series User Manual V1.0

2.2 Front Panel

The front panel of the LNP-1604G-SFP series: 16-port industrial Gigabit PoE+ unmanaged

Ethernet switch with 12*10/100/1000Tx (PSE: 30W/Port) and 4*100/1000 SFP Slot. See Figure

2.2.

2.3 Top View

Figure 2.3, below, shows the top panel of the LNP-1604G-SFP series switch that is

equipped with one 6-pin removal terminal block connector for dual DC power inputs (48~55

VDC).

Figure 2.2 - Front Panel of the LNP-1604G-SFP Series

Figure 2.3 - Top Panel View of LNP-1604G-SFP Series

LAN# 1~12 LED for 1000Mbps

LAN# 1~12 –10/100/1000 RJ45

LAN# 1~12 LED for 10/100Mbps

Grounding Screw

6-Pin Removal Terminal Block (Power Input)

LED for Power 1, Power 2 and Fault

PoE LED Indicator for LAN# 1~12

LAN# 13~16 LED for Network activity

SFP for LAN# 13~16 100/1000Mbps Fiber

Antaira Technologies - Industrial Ethernet Switches

LNP-1604G-SFP Series User Manual V1.0

2.4 LED Indicators

There are LED light indicators located on the front panel of the industrial Ethernet switch that

display the power status and network status. Each LED indicator has a different color and has

its own specific meaning, see below in Table 2.1.

LED

Color

Description

Power 1

Green

Power input 1 is active

Off

Power input is inactive

Power 2

Green

Power input 2 is active

Off

Power input is inactive

Fault

Red

Power input 1 or 2 is inactive

Off

Both power input 1 and 2 are active

PoE Status

Red

The port is supplying power to the powered-device

Off

No powered-device attached or power supplying fails

Link Activity

(SFP Port)

Green

Connected to the network with 1000Mbps

Flashing

Networking is active

Off

Not connected to the network

Amber

Connected to the network with 100Mbps

Flashing

Networking is active

Off

Not connected to the network

LAN Port 1 ~ 12

(Upper LED)

Green

Connected to network, 1000Mbps

Flashing

Networking is active

Off

Not connected to network

LAN Port 1 ~ 12

(Lower LED)

Green

Connected to network, 10/100Mbps

Flashing

Networking is active

Off

Not connected to network

Table 2.1

LED Indicators for LNP-1604G-SFP Series

Antaira Technologies - Industrial Ethernet Switches

LNP-1604G-SFP Series User Manual V1.0

2.5 Ethernet Ports

RJ-45 Ports (Auto MDI/MDIX):

The RJ-45 ports are auto-sensing for 10/100/1000Base-Tx devices connections. Auto MDI/MDIX

means that the switch can connect to another switch or workstation without changing the straight-

through or crossover cabling. See the figures shown below for straight-through and crossover

cabling schematics.

RJ-45 Pin Assignments (Table 2.2)

Pin Number

Assignment

Rx+

Rx-

Tx+

Tx-

All ports on this industrial Ethernet switch support automatic MDI/MDI-X operations. Users can

use straight-through cables (see figure below) for all network connections to PCs, servers, and

other switches or hubs. With straight-through cable, pins 1, 2, 3, and 6, at one end of the cable,

are connected straight through to pins 1, 2, 3 and 6 at the other end of the cable. The table below

(Table 2.3) shows the 10BASE-T/100BASE-TX/1000BASE-T and MDI/MDI-X port pin outs.

Note:

The “+” and “-” signs represent the polarity of the wires that make up each wire pair.

Pin MDI-X

Signal Name

MDI Signal Name

Receive Data plus (RD+)

Transmit Data plus (TD+)

Receive Data minus (RD-)

Transmit Data minus (TD-)

Transmit Data plus (TD+)

Receive Data plus (RD+)

Transmit Data minus (TD-)

Receive Data minus (RD-)

Table 2.2

RJ45 Pin Assignments

Table 2.3

Ethernet Signal Pin Outs

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere ANTAIRA Netzwerk-Router Handbücher

ANTAIRA

ANTAIRA LNX-802AG-S10-T Bedienungsanleitung

ANTAIRA

ANTAIRA LNP-2804GN-SFP-T Bedienungsanleitung

ANTAIRA

ANTAIRA LMP-0702G-SFP-bt-24-V2 Series Bedienungsanleitung

ANTAIRA

ANTAIRA LRX-0200 Series Bedienungsanleitung

ANTAIRA

ANTAIRA ARS-7235-5E-AC Series Bedienungsanleitung

ANTAIRA

ANTAIRA LMX-2004G-SFP Series Bedienungsanleitung

ANTAIRA

ANTAIRA LMP-0601G-SFP-24-V2 Series Bedienungsanleitung

ANTAIRA

ANTAIRA LMX-0601G-SFP Series Bedienungsanleitung

ANTAIRA

ANTAIRA ARS-7235-AC Series Bedienungsanleitung

ANTAIRA

ANTAIRA LNX-501AG-SFP-T Bedienungsanleitung

ANTAIRA

ANTAIRA LMP-0602 Series Bedienungsanleitung

ANTAIRA

ANTAIRA LNP-0500G-BT Series Bedienungsanleitung

ANTAIRA

ANTAIRA LNP-C500G-T Bedienungsanleitung

ANTAIRA

ANTAIRA LMX-0800G Series Bedienungsanleitung

ANTAIRA

ANTAIRA LNX-0802C-SFP Series Bedienungsanleitung

ANTAIRA

ANTAIRA LMP-1002C-SFP Series Bedienungsanleitung

ANTAIRA

ANTAIRA LMP-1600G-M12-67-110 Series Bedienungsanleitung

ANTAIRA

ANTAIRA LMP-0600-24-V2 Series Bedienungsanleitung

ANTAIRA

ANTAIRA LMX-0602 Series Bedienungsanleitung

ANTAIRA

ANTAIRA LMP-0601G-SFP-V2 Series Bedienungsanleitung

ANTAIRA

ANTAIRA STE-6104C-T-V2 Bedienungsanleitung

ANTAIRA

ANTAIRA ARX-7234-AC-PD-T Bedienungsanleitung

ANTAIRA

ANTAIRA LNP-800AGH-24 Series Bedienungsanleitung

ANTAIRA

ANTAIRA LMX-0500 Series Bedienungsanleitung

Beliebte Netzwerk-Router Handbücher anderer Marken

Allnet

Allnet ALL0333AU Bedienungsanleitung

HomeSeer

HomeSeer HT-SEL Bedienungsanleitung

Sercomm

Sercomm Genesis OC3505D Bedienungsanleitung

Billion

Billion BIPAC 5102 Series Bedienungsanleitung

TP-Link

TP-Link TD-8817 Bedienungsanleitung

Motorola

Motorola MR1900 Bedienungsanleitung

Digi

Digi IX14 Bedienungsanleitung

Cisco

Cisco NCS 540 Handbuch

XAVi

XAVi X8821e Bedienungsanleitung

BEC

BEC 6200WZL Bedienungsanleitung

MikroTik

MikroTik hAP ac3 Series Bedienungsanleitung

Korenix

Korenix JetNet 5428G Series Bedienungsanleitung

NETGEAR

NETGEAR FS526T - Switch Bedienungsanleitung

Automated Logic

Automated Logic ZN551 Betriebsanleitung

Cisco

Cisco ASR 1000 Series Bedienerhandbuch

EnGenius

EnGenius ESR-9710 Bedienungsanleitung

Cisco

Cisco 805 Series Bedienungs- und Sicherheitshinweise

LevelOne

LevelOne FBR-1416 Bedienungsanleitung