Antari M-4 Bedienungsanleitung

M-4

Stage Fog Machine

User Manual

English Français Deutsch

• •

User Manual

Safety Information

Please read the following safety information carefully before operating the

machine. Information includes important safety information about installation,

usage, and maintenance. Pay attention to all warning labels and instructions in

this manual and printed on the machine.

If you have questions about how to operate the machine safely, please contact your local

Antari dealer for help.

Keep this device dry.

Always connect to a grounded circuit to avoid risk of electrocution.

Before connecting machine to power, always check voltage indicate on machine

match to your local AC voltage. Do not use the machine if AC power voltage does

not match.

Disconnect the machine from AC power before servicing and when not in use.

This product is for indoor use only! Do not expose to rain or moisture. If fluid is

spilled, disconnect AC power and clean with a damp cloth. If fluid is spilled onto

electronic parts, immediately unplug the machine and contact your local Antari

dealer for advice.

No user serviceable and modifiable parts inside. Never try to repair this product, an

unauthorized technician may cause damage or malfunction.

For adult use only. Never leave the machine running unattended.

Position the machine in a well-ventilated area. Please leave about 50 cm space

around the machine.

Never add flammable liquid of any kind to the machine.

Make sure there are no flammable materials close to the machine while operating.

Only use Antari fluid. Other fluid may lead to heater clog and malfunction.

If the machine fails to work, unplug the machine and stop operation immediately.

Contact your local Antari dealer for assistance.

Before transporting the machine, make sure the fluid tank is completely drained.

Fog fluid may present health risks if swallowed. Do not drink fog fluid. Store it

securely. In case of eye contact or if fluid is swallowed immediately look for medical

advice.

Unpacking and Inspection

Immediately upon receiving the machine, carefully unpack the carton, check all content to

ensure that all parts are present and have been received in good condition. If any parts

appear damaged or mishandled from shipping, notify the shipper immediately and retain the

packing material for inspection.

What is included: 1 x M-4 Fogger

1 x Power Cord

1 x User Manual

Product Dimension

Product Overview

193 mm

385.7 mm

345 mm

PowerCon

LCD Control Panel

WDMX / Wireless Reciver

XLR 5-Pin DMX

XLR 3-Pin DMX

Breaker

Setting Up

Step 1: Place the machine on a flat surface and in a suitable large area with at least 50 cm

open space at each side of the machine and 5 meters for the output direction of the

machine.

Step 2: Fill the fluid tank with Antari fog fluid.

Step 3: Connect the machine to suitable rated power supply. To determine the power

requirement for the machine refer to the label on the back of the machine.

Always connect the machine to a protected circuit and ensure it is properly

grounded to avoid risk of electrocution.

Step 4: Turn on the machine by connecting the power cord and turning the Neutrik

Powercon. Heat-up takes approximatly 5 minutes. Once the machine has reached operating

temperature, the LCD screen will display “Ready To Fog”. Now the machine is ready for

operation.

Control Panel Operation

The machine can be operated with the on-board LCD control panel.

Button Function

[Menu] Select from functions

[ ▲ / Timer] To increase value or choose from options

To activate Timer Mode

[ ▼ / Volume] To decrease value or choose from options

To active Volume Mode

[Stop] To deactivate Timer/Volume function

Or to select and memorize the setting

ANTARI M-4

Ready to Fog

Control Menu

Set interval time from 15 to 360 seconds

Set duration time from 1 to 5 seconds

Turn On/Off 2 Second Jet Mode

Set DMX address from 1 to 512

Turn On/Off W-DMX

Rest W-DMX connection

Turn On/Off wireless control

Turn On/Off to have a quick start (to run last settings)

DMX Operation

Making the DMX Connection – Connect machine to a DMX controller or to one of the

machines in the DMX chain.

DMX Connector Pin Assignment

The machine provide 3 or 5 pin XLR connector for DMX connection. Diagram below indicate

pin assignment information

Interval Set

15 Sec

DurationSet

5 Sec

Wireless

Off

Quick Start

Off

DMX512

Add: 1

W-DMX Power

Off

W-DMX Reset

Off

2 Second Jet Mode

off

Pin Function

1 Ground

2 Data-

3 Data+

DMX Channel Function

Channel DMX Value Range Function

1 0 – 5 Fog Off

6 –255 100% Fog Output

Status of W-DMX connection (Optional)

Symbol on the Liquid Crystal Display Status of W-DMX connection

○ Transmitter not assigned

◎ Transmitter assigned, No DMX signal

⊙ Transmitter link lost or linking to transmitter

● Transmitter assigned, DMX signal received

Wireless Remote Control Operation (Optional)

The wireless remote control system W-1 consists of a transmitter equipped with two buttons

for on and off functions and a receiver pre-attached to the rear panel of M-4.

*Transmitter

With the transmitter, it is possible to emit fog via radio signal at maximum distance of 50

meters. Press the button “A” to emit fog and press the button “B” to stop fogging.

*Receiver

If the optional wireless remote control function is selected and included, a radio signal

receiver is tested and pre-attached on the machine. The included transmitter also has been

paired with the attached receiver before shipping.

To activate or deactivate the wireless remote control function, press [Menu] until the LCD

displays “Wireless”. Then press the ▲ or ▼ button to turn on or off the wireless remote

control function. Once the wireless remote control function is turned on, the letter“W”will

be displayed on the LCD screen.

Registering transmitter

Transmitter can be paired or deleted from the receiver. Each receiver can pair up to 10

transmitters. Follow below steps to pair or delete transmitter from receiver.

Step 1: Power off M-4 Fogger

Step 2: Press and hold [DOWN] button

Step 3: Turn power on and release [DOWN] button when LCD display blinks

Step 4: Follow the menu instruction to pair or delete transmitter

Notes:

One machine can be controlled by up to 10 transmitters while one transmiter can be paired

with an unlimited number of machines.

Fluid

Use Antari FLC water-based fluid for the best performance for the M-4 Fogger. The

machine is tested and calibrated with this fluid to achieve the best output performance.

Warranty will be void if any other type of liquid is used, improper use of liquid may lead to

machine failure and malfunction.

Service and Maintenance

Do not allow the machine and fluid to become contaminated.

Regularly fill distilled water to fluid tank and run the machine to clean the system.

After cleaning, refill Antari fog fluids into fluid tank and make sure machine can

produce fog properly.

It is recommended to run the machine on a monthly basis in order to achieve best

performance and output condition.

Excessive dust, liquid and dirt built up will degrade performance and cause

overheating.

Technical Specifications

Input voltage 110-120V 60Hz or 220-240V 50Hz

Breaker 15A 250V (110V-120V)

8A 250V (220-240V)

POWER CONSUMPTION 1500W

Warm-up time 5 minutes (approx.)

Output distance approx. 5 meters

Fluid tank capacity 2.4 L

Fluid consumption 24ml/10sec

Recommended fluid Antari FLC water-based fluid

Control options LCD control panel, DMX, W-DMX, Wireless remote control,

DMX channels 1 channel, Output volume

Power connection Neutrik Powercon

DMX data connection 3-pin and 5-pin XLR

Dimensions L345 x W193 x H385.7mm

Dry weight 11.0kg

Inhaltsverzeichnis

Sprachen:

Andere Antari Nebelmaschine Handbücher

Antari

Antari M-5 Bedienungsanleitung

Antari

Antari Ip-1000 Bedienungsanleitung

Antari

Antari Z-350 FAZER Bedienungsanleitung

Antari

Antari F-5 Fazer Bedienungsanleitung

Antari

Antari Z-1000II Bedienungsanleitung

Antari

Antari X FAZER Bedienungsanleitung

Antari

Antari Onboard DMX Bedienungsanleitung

Antari

Antari Z-1200II Bedienungsanleitung

Antari

Antari HZ-300 Bedienungsanleitung

Antari

Antari Z-1020 Bedienungsanleitung

Antari

Antari F-80Z Fehlerbehebungshandbuch

Antari

Antari DNG-200 Bedienungsanleitung

Antari

Antari M-11 Bedienungsanleitung

Antari

Antari M-7 RGBA Bedienungsanleitung

Antari

Antari FT-200 Bedienungsanleitung

Antari

Antari W-508 Bedienungsanleitung

Antari

Antari Fazer X-310 PRO Bedienungsanleitung

Antari

Antari F-5D Fazer Bedienungsanleitung

Antari

Antari Z-Stream Bedienungsanleitung

Antari

Antari FT-100 Fire Training Bedienungsanleitung

Antari

Antari ICE Bedienungsanleitung

Antari

Antari FT-100 Fire Training Bedienungsanleitung

Antari

Antari M-1 Bedienungsanleitung

Antari

Antari S-100 II Bedienungsanleitung

Beliebte Nebelmaschine Handbücher anderer Marken

Boost

Boost BOOST-FOG400LED-BK Bedienungsanleitung

Home Accents Holiday

Home Accents Holiday FM1000-ASH Bedienungsanleitung

EuroLite

EuroLite ZEITGEIST FOG-1200 Bedienungsanleitung

Dyna-Fog

Dyna-Fog CYCLONE ULTRA 2734 Bedienungsanleitung

PROEL

PROEL DRAGO HEAVY PLFD150HY Bedienungsanleitung

Sparklyn

Sparklyn Y846 Bedienungsanleitung

Magicfx

Magicfx CO2 Gun Bedienungsanleitung

Ibiza

Ibiza LSM500LAS Bedienungsanleitung

Venue Lighting Effects

Venue Lighting Effects ULTRA MINI-FOGGER Bedienungsanleitung

High End

High End F-100 Bedienungsanleitung

Chauvet

Chauvet ARENA 2100 FLEX Bedienungsanleitung

Beamz

Beamz F1600 Bedienungsanleitung

Sagitter

Sagitter SG ARS900C Bedienungsanleitung

KISANKRAFT

KISANKRAFT KK-STF-480 Bedienungsanleitung

Orion

Orion OT-U250PP Leitfaden

Beamz

Beamz S2500 Bedienungsanleitung

American DJ

American DJ Dyno-Fog II Bedienungsanleitung

JB Systems

JB Systems FX 1700 Bedienungsanleitung