Antari M-9 RGBAW Bedienungsanleitung

M-9 RGBAW

Stage Fog Machine

User Manual

- ENGLISH

Safety Information

Please read the following safety information carefully before operating the machine.

Information includes important safety information about installation, usage, and

maintenance. Pay attention to all warning labels and instructions in this manual and

printed on the machine.

If you have questions about how to operate the machine safely, please contact your local Antari

dealer for help.

Keep this device dry.

Always connect to a grounded circuit to avoid risk of electrocution.

Before connecting the machine to power, always check the voltaged indicate on the

machine matches to your local AC voltage. Do not use the machine if AC power voltage

does not match.

Disconnect the machine from AC power before servicing and when not in use.

If the supply cord is damaged, contact your local Antari dealer for replacement.

This product is for indoor use only! Do not expose to rain or moisture. If fluid is spilled,

disconnect AC power and clean with a damp cloth. If fluid is spilled onto electronic parts,

immediately unplug the machine and contact your local Antari dealer for advice.

No user serviceable and modifiable parts inside. Never try to repair this product, an

unauthorized technician may lead the machine to damage or malfunction.

For adult use only. Children being supervised not to play with the machine. Never leave

the machine running unattended.

The machine is not to be used by persons (including children) with reduced physical,

sensory or mental capabilities, or lack of experience and knowledge.

Installed in a well ventilated area. Provide at least 50 cm space around the machine.

Never add flammable liquid of any kind to the machine.

Make sure there are no flammable materials close to the machine while operating.

Only use Antari fluid. Other fluid may lead to heater clog and malfunction.

If the machine fails to work, unplug the machine and stop operation immediately. Contact

your local Antari dealer for .

Before transporting the machine, make sure the fluid tank is completely drained.

Smoke fluid may present health risks if swallowed. Do not drink smoke fluid. Store it

securely. In case of eye contact or if fluid is swallowed immediately look for medical

advice.

Unpacking and Inspection

Immediately upon receiving the machine, carefully unpack the carton, check all content to ensure

that all parts are present and have been received in good condition. If any parts appear damaged or

mishandled from shipping, notify the shipper immediately and retain the packing material for

inspection.

What is included: 1 x M-9 RGBAW Fogger

1 x W-2 Wireless Remote

1 x Power Cord

1 x User Manual

Product Dimension

W 320.8 mm

H 419.3 mm

L 393 mm

Product Overview

Setting Up

Step 1: Place the machine on a flat surface and in a suitably large area with at least 50 cm open

space around the machine.

Step 2: Fill the fluid tank with Antari approved fluid.

Step 3: Connect the machine to suitably rated power supply. To determine the power requirement

for the machine refer to the label on the back of the machine.

Always connect the machine to a protected circuit and ensure it is properly grounded to

avoid risk of electrocution.

Step 4: Turn on the machine and allow it to heat up. Heat up takes approximatley 14 mintues. Once

the machine has reached operating temperature, the LCD display will show “Ready To Fog”. Now the

machine is ready for operation.

Step 5: To start making fog, locate the Volume button on the control panel, and press the button to

start making fog.

Step 6: To turn off the machine, press STOP button and turn Powercon to the OFF position.

Output Nozzle

OLED Control Panel

XLR 3 / 5-Pin DMX Connector

Neutrik TRUE 1 Power Connector

Wireless Receiver

LED

Operation

Control Panel Operation

The machine can be operated with an onboard digital control interface

Button

Function

[MENU]

Scroll through setting menu

▲[UP]/[TIMER]

Up/Activate Timer function

▼[DOWN]/[VOLUME]

Down/Activate Volume function

[STOP]

Deactivate Timer/Volume function

Control Menu

Set DMX address from 1 to 503, 10 channels

1 to 498, 15 channels

1 to 488, 25 channels

Set DMX channel mode 10, 15 or 25 channels

Set machine as Master of Slave unit

Turn LED On or Off

DMX512

Address: 1

Stand Alone

Set Master

Color Mode

DMX Channel Mode

10 Ch

Antari M-9

Ready to Fog

Set LED output color from macro 1 to 25

Set LED chase from 1 to 8

Set interval from 15 to 360 seconds

Set duration from 1 to 5 seconds

Turn On or Off wireless control

Set wireless remote button function macro color 1 to 25 or chase 1 to 8.

Setting for LED to turn on with fog only or always on.

Set LED delay time from 0 to 5 seconds.

Color Mode

Marco:01

Color Mode

Chase:01

Timer

Interval 15 Sec

Timer

Duration 5 Sec

Wireless Setting

Button A:M01

Wireless Setting

Button B:M01

Wireless Setting

Button C:M01

Wireless Setting

Button D:M01

LED Setting

Fog Only

LED Fade Out

Delay: 0 Sec

Turn On/Off run last setting function

Turn On/Off Jet Mode, set time from 2 to 7 seconds.

Turn On/Off W-DMX

Reset W-DMX connection

DMX Connector Pin Assignment

The machine provides 3 or 5 pin XLR connector for DMX connection. The diagram below indicates

pin assignment information.

Function

Ground

Data-

Data+

N/A

DMX Operation

Making the DMX Connection –Connect the machine to a DMX controller or to one of the machines

in the DMX chain. The machine uses both 3-pin and 5-pin XLR connector for DMX connection, the

connector is located on the rear of the machine.

Run Last Setting

W-DMX 512

Off

W-DMX Reset

Yes

2-7 Sec Jet Mode

2 Sec

DMX Channel Function

10 Channel Mode

Channel

DMX Value Range

Function

0 –4

5 –255

Fog Off

Fog On

0-255

Red LED 0-100%

0-255

Green LED 0-100%

0-255

Blue LED 0-100%

0-255

Amber LED 0-100%

0-255

White LED 0-100%

1-30

31-60

61-90

91-120

121-150

151-180

181-210

211-255

Chase 1

Chase 2

Chase 3

Chase 4

Chase 5

Chase 6

Chase 7

Chase 8

0-255

Chase Speed 0-255

step per min

0-255

Master Dimmer 0-100%

0-255

Strobe 1-20 Hz

15 Channel Mode

Channel

DMX Value Range

Function

0 –4

5 –255

Fog Off

Fog On

0-255

Red Zone 1 0-100%

0-255

Green Zone 1 0-100%

0-255

Blue Zone 1 0-100%

0-255

Amber Zone 1 0-100%

0-255

White Zone 1 0-100%

0-255

Red Zone 2 0-100%

0-255

Green Zone 2 0-100%

0-255

Blue Zone 2 0-100%

0-255

Amber Zone 2 0-100%

0-255

White Zone 2 0-100%

1-30

31-60

61-90

91-120

121-150

151-180

181-210

211-255

Chase 1

Chase 2

Chase 3

Chase 4

Chase 5

Chase 6

Chase 7

Chase 8

0-255

Chase Speed 0-255

step per min

0-255

Master Dimmer 0-100%

0-255

Strobe 1-20 Hz

25 Channel Mode

Channel

DMX Value Range

Function

0 –4

5 –255

Fog Off

Fog On

0-255

Red Zone 1 0-100%

0-255

Green Zone 1 0-100%

0-255

Blue Zone 1 0-100%

Inhaltsverzeichnis

Andere Antari Nebelmaschine Handbücher

Antari

Antari Z-80 Bedienungsanleitung

Antari

Antari FT-50 Bedienungsanleitung

Antari

Antari Z-1000X MK3 Bedienungsanleitung

Antari

Antari HZ-100 Bedienungsanleitung

Antari

Antari Z-300II Fazer Bedienungsanleitung

Antari

Antari HZ-500 Montageanleitung

Antari

Antari S-100 II Bedienungsanleitung

Antari

Antari FT-20 Bedienungsanleitung

Antari

Antari Z-1000 III Bedienungsanleitung

Antari

Antari Z-1200II Bedienungsanleitung

Antari

Antari Z-800 III Bedienungsanleitung

Antari

Antari DNG-250 Bedienungsanleitung

Antari

Antari Z-390 Series Bedienungsanleitung

Antari

Antari HZ-400 Bedienungsanleitung

Antari

Antari Fazer Z-300 Bedienungsanleitung

Antari

Antari M-11 Bedienungsanleitung

Antari

Antari MOBILE MB-1 Bedienungsanleitung

Antari

Antari FT-200 Bedienungsanleitung

Antari

Antari Ip-1000 Bedienungsanleitung

Antari

Antari Fogger X-510II Bedienungsanleitung

Antari

Antari Z Series Bedienungsanleitung

Antari

Antari X FOGGER Bedienungsanleitung

Antari

Antari FT-200 Bedienungsanleitung

Antari

Antari F-2 Fazer Bedienungsanleitung

Beliebte Nebelmaschine Handbücher anderer Marken

Boost

Boost BOOST-FOG400LED-BK Bedienungsanleitung

Home Accents Holiday

Home Accents Holiday FM1000-ASH Bedienungsanleitung

EuroLite

EuroLite ZEITGEIST FOG-1200 Bedienungsanleitung

Dyna-Fog

Dyna-Fog CYCLONE ULTRA 2734 Bedienungsanleitung

PROEL

PROEL DRAGO HEAVY PLFD150HY Bedienungsanleitung

Sparklyn

Sparklyn Y846 Bedienungsanleitung

Magicfx

Magicfx CO2 Gun Bedienungsanleitung

Ibiza

Ibiza LSM500LAS Bedienungsanleitung

Venue Lighting Effects

Venue Lighting Effects ULTRA MINI-FOGGER Bedienungsanleitung

High End

High End F-100 Bedienungsanleitung

Chauvet

Chauvet ARENA 2100 FLEX Bedienungsanleitung

Beamz

Beamz F1600 Bedienungsanleitung

Sagitter

Sagitter SG ARS900C Bedienungsanleitung

KISANKRAFT

KISANKRAFT KK-STF-480 Bedienungsanleitung

Orion

Orion OT-U250PP Leitfaden

Beamz

Beamz S2500 Bedienungsanleitung

American DJ

American DJ Dyno-Fog II Bedienungsanleitung

JB Systems

JB Systems FX 1700 Bedienungsanleitung