Antari WiFi-800 Bedienungsanleitung
1
WiFi-800 USER MANUAL
2013 Antari Lighting and Effects Ltd.
English ‧中文
2
3
User Manual
Congratulations on the purchase of your new
ANTARI WiFi-800 FOG MACHINE.
Introduction
Thank you for choosing ANTARI WiFi-800 Fog Machine. You now own a state-of-the-art
machine. Prior to use, we suggest that you carefully read all of the instructions. By following
the suggestions found in this user manual, you can look forward to the reliable and
satisfactory performance of your ANTARI Fog Machine for years to come.
Please follow these operation, safety and maintenance instructions to ensure a long and
safe life-time for your fog machine.
CAUTION:
Risk of electric shock. Disconnect the appliance from the electric supply before
refilling liquid, cleaning or performing maintenance on the machine.
Danger of Electric Shock
♦Household Use only. Not designed for outdoor use.
♦Use grounded electrical outlet only. Prior to use take care to determine that the unit is
installed at the rated voltage.
♦Always unplug yourANTARI Fog Machine before filling its liquid tank.
♦Always keep fog machine in upright position.
♦Turn off or unplug the machine when not in use.
♦This machine is not water-proof. Keep this device dry.Don’t immerse in water .If moisture,
water, or fog fluid gets inside the housing, immediately unplug the unit and contact a
authorized service technician or yourANTARI dealer before using it again.
♦No user serviceable parts inside. Refer to yourANTARI dealer or qualified service
personnel.
!
4
Danger of Burns
♦This device is for adult use only and must be installed out of the reach of children. Never
leave the unit running unattended.
♦Never aim the output nozzle directly at people.
♦Fog machine output is very hot. Avoid coming within 60 cm of the output nozzle during
operation.
♦Locate the fog machine in a well-ventilated area. Never cover the unit’s vents. In order to
guarantee adequate ventilation, allow a free air space of at least 20 cm around the sides
and top of the unit.
♦Never aim the output nozzle at flames.
♦If the supply cord is damaged, it must be replaced by manufacturer or its service agent or
qualified personnel in order to avoid a hazard.
♦Always let your ANTARI Fog Machine cool down before cleaning or service.
Danger of Explosion
♦Never add flammable liquids (such as oil, gas, perfume) to the fog liquid tank.
♦Use only high-quality, water-based fog liquid that your dealer recommends. Other fog
liquids may cause clogging or damage fog machine.
♦Always make sure there is sufficient liquid in the tank. Operating this unit without liquid
will cause damage to the pump as well as over-heating of the heater.
♦If your ANTARI fog machine fails to work properly, discontinue use immediately. Drain
all fog liquid from the tank, pack the unit securely (preferably in the original packing
material), and return it to yourANTARI dealer for service.
♦Always empty fluid tank before posting or transporting this unit.
♦Never drink fog liquid. If it is ingested, call a doctor immediately. If fog liquid comes in
contact with skin or eyes, rinse thoroughly with water.
Note: Pay attention to all warning labels and instructions printed on the exterior of your
ANTARI Fog Machine
Unpacking & Inspection
Open the shipping carton and verify that all equipment necessary to operate the system has
arrived intact.
The shipping carton should contain the following items:
5
1. One unit of Antari WiFi-800 Fog Machine
2. Power cord
3. User Manual
If any equipment is missing contact your ANTARI dealer immediately.
Before beginning your initial setup on ANTARI WiFi-800 Fog Machine, make sure that there
is no evident damage caused by transportation. In the event that the unit’s housing or
cable is damaged, do not plug it in and do not attempt to use it until after contacting your
ANTARI dealer for assistance.
Setting Up
Step 1: Place the machine on a flat surface and in a suitable large area with at least 50 cm
open space around the machine.
Step 2: Fill the fluid tank with Antari approved fluid.
Step 3: Connect the machine to suitable rated power supply. To determine the power
requirement for the machine refer to the label on the back of the machine.
Step 4: Turn on the machine and allow it to heat up, while the machine is heating up the
LED status light on pushbutton will “Flash Red”. Heat up takes approximatly 2 mintues.
Once the machine has reached operating temperature, the status LED will light “Solid Red”.
Now the machine is ready for operation.
Step 5: To start making smoke, press the pushbutton locates on the handle; release
pushbutton to stop.
Step 6: To turn off the machine, put the power switch to the OFF position.
iOS Operation
Downloading the application
Login to the App Store and download Antari Fog 800 application. It allows you to control the
WiFi 800 using your iPhone or iPad.
6
Connecting iPhone/iPad to WiFi 800
Step 1: On your iPhone/iPad, select Settings > Wi-Fi > list of available Wi-Fi device will be
showed.
Step 2: Select WIFI800-XXXXXXXX, “XXXXXXXX” indicate the serial number of the
machine, is also the default SSID and password.
Step 3: Enter password to connect to the machine, and wait until the network name is
checked.
7
Controlling
The Fog 800 application provides you two ways control your WiFi 800 fog machine:
Timer Mode – allows you to set smoke duration time. Slide the time bar (from 1 to 60
seconds), press ON to start making smoke. Smoke will stop once the timer count down to
zero.
Continuous Mode – simply press the ON button to make smoke. The machine continuously
make smoke, to stop press the OFF button.
Note: If ON button is pressed and machine can not make smoke, please make sure the
8
continuous cycle button is turn on
Wi-Fi Advance Setting
Aweb-based configuration allows you to make customize configuration to your Wi-Fi setting.
To start configuration first make Wi-Fi connection with the machine, then open a web
browser, enter http://192.168.16.254 and when login window appears enter default user
name admin and password admin
9
Wireless settings > Basic
Radio On/Off
Turn radio signal on or off
On default
Off
WiFi On/Off
Turn WiFi signal on or off
On default
Off
Network Mode
Select one of the following that meets your clients
11b/g mixed mode
10
11b only
11g only
11b/g/n mixed mode default
11n only(2.4G)
Network Name(SSID)
The name of your wireless network, create a name
for your wireless network using up to 32 characters.
Broadcast Network
Name(SSID)
Enable is default setting. If Disable is selected, the
SSID of the machine will not be seen. The wireless
client will have to know the SSID in order to connect
to it.
AP Isolation
Preventing devices connected toAP from
communicating directly with each other. Default is
set to Disable.
Frequency (Channel)
Select transmitting frequency.
Wireless Settings > Security
SSID choice
Select a SSID to start configuration
Security Mode
Choose one of the following mode for data
protection:
Disable
OPENWEP
WPA-PSK
WPA2-PSK
Andere Handbücher für WiFi-800
1
Inhaltsverzeichnis
Andere Antari Nebelmaschine Handbücher
Antari
Antari SW-250 Bedienungsanleitung
Antari
Antari F-5D Fazer Bedienungsanleitung
Antari
Antari FT-50 Bedienungsanleitung
Antari
Antari MOBILE MB-55 Bedienungsanleitung
Antari
Antari F-450 Bedienungsanleitung
Antari
Antari II Series Bedienungsanleitung
Antari
Antari Z Series Bedienungsanleitung
Antari
Antari Z-1020 Bedienungsanleitung
Antari
Antari LCU-1 Bedienungsanleitung
Antari
Antari W-508 Bedienungsanleitung
Antari
Antari Z-800II Bedienungsanleitung
Antari
Antari Z-800 III Bedienungsanleitung
Antari
Antari F-80Z Bedienungsanleitung
Antari
Antari FT-200 Bedienungsanleitung
Antari
Antari CINEMA HAZE CH-1 Bedienungsanleitung
Antari
Antari Fog cooler DNG-100 Bedienungsanleitung
Antari
Antari Fazer X-310 PRO Bedienungsanleitung
Antari
Antari M-11 Bedienungsanleitung
Antari
Antari F-80Z Fehlerbehebungshandbuch
Antari
Antari Z-Stream Bedienungsanleitung
Beliebte Nebelmaschine Handbücher anderer Marken
Boost
Boost BOOST-FOG400LED-BK Bedienungsanleitung
Home Accents Holiday
Home Accents Holiday FM1000-ASH Bedienungsanleitung
EuroLite
EuroLite ZEITGEIST FOG-1200 Bedienungsanleitung
Dyna-Fog
Dyna-Fog CYCLONE ULTRA 2734 Bedienungsanleitung
PROEL
PROEL DRAGO HEAVY PLFD150HY Bedienungsanleitung
Sparklyn
Sparklyn Y846 Bedienungsanleitung
