Antari F-1 Fazer Bedienungsanleitung

F-1 Fazer

User Manual

English Français Deutsch • • • 中文

User Manual - English

Safety Information

Please read the following safety information carefully before operating the

machine. This information includes important safeguards about installation,

usage, and maintenance. Pay attention to all warning labels and instructions in

this manual and printed on the machine.

If you have questions about how to operate the machine safely, please contact your local

Antari dealer for help.

․Keep this device dry.

․Always connect to a grounded circuit to avoid risk of electrocution.

․Before connecting the machine to power, always check the voltage indicated on

the machine matches your local AC voltage. Do not use the machine if the AC

power voltage does not match.

․Disconnect the machine from AC power before servicing and when not in use.

․This product is for indoor use only! Do not expose to rain or moisture. If fluid is

spilled, disconnect AC power and clean with a damp cloth. If fluid is spilled onto

electronic parts, immediately unplug the machine and contact your local Antari

dealer for advice.

․No user serviceable and modifiable parts inside. Never try to repair this product,

an unauthorized technician may cause damage or malfunction to the machine.

․For adult use only. Never leave the machine running unattended.

․Installed the machine in a well-ventilated area. Provide at least 50 cm space

around the machine.

․Never add flammable liquid of any kind to the machine.

․Make sure there are no flammable materials close to the machine while operating.

․Only use Antari fluid. Other fluid may lead to heater clog or malfunction.

․If the machine fails to work, unplug the machine and stop operation immediately.

Contact your local Antari dealer for advice.

․Before transporting the machine, make sure the fluid tank is completely drained.

․Fog fluid may present health risks if swallowed. Do not drink fog fluid. Store it

securely. In case of eye contact or if fluid is swallowed, immediately seek medical

advice.

Unpacking and Inspection

Immediately upon receiving the machine, carefully unpack the carton, check the content to

ensure that all parts are present and have been received in good condition. If any parts

appear damaged or mishandled from shipping, notify the shipper immediately and retain the

packing material for inspection.

What is included: 1 x F-1 Fazer

1 x Power Cord

1 x User Manual

Product Dimensions

275mm

608mm

286mm

Product Overview

Both Wireless Remote and Wireless DMX are Optional and not included

Optional Wireless Remote Add On Kit: WTR-10

Optional Wireless DMX Add On Kit: W-DMX-PCBR

Setting Up

Step 1: Place the machine on a flat surface and in a suitably large area with at least 50 cm

of open space around the machine.

Step 2: Fill the fluid tank with Antari approved fluid.

Step 3: Connect the machine to a suitably rated power supply.To determine the power

requirement for the machine refer to the label on the back of the machine.

Always connect the machine to a protected circuit and ensure it is properly

grounded to avoid risk of electrocution.

Blue LCD screen, Timer

mode, Volume mode

Neutrik PowerCon

Breaker

XLR 3-Pin DMX Connector

Wireless Remote / WDMX

Wireless Solution

XLR 5-Pin DMX Connector

Power ON / OFF

Step 4: Turn on the machine and allow it to heat up. Heat up takes approximatly 4 mintues.

Once the machine has reached operating temperature, the display will show Ready to

Faze. Now the machine is ready for operation.

Step 5: To start making haze, press the VOLUME button on the control panel.

Step 6: To turn off the machine, hold the STOP button for 3 seconds; the machine will

automatically run a self-cleaning process and shut off after the process is done.

Operation

Control Panel Operation

The machine can be operated with the onboard digital control interface.

Button

Function

[MENU]

Scroll through setting menu

[UP]/[TIMER]

Up/Activate Timer fucntion

[DOWN]/[VOLUME]

Down/Activate Volume function

[STOP]

Deactivate Timer/Volume function.

Or to select and memorize the setting.

Hold 3 seconds to start self-cleaning process and shut

down the machine

Control Menus

Both the Wireless Remote and W-DMX menu only function when the Optional Wireless

Remote or W-DMX Add On Kits are installed.

Antari F-1

Ready to Faze

Set interval time at Timer mode from 5 to 200 seconds

Set duration time at Timer mode from 1 to 200 seconds

Set output volume at Timer mode from 1 to 100 %

Set output volume at Volume mode from 1 to 100 %

Set fan speed from 20 to 100%

Set DMX/W-DMX address from 1 to 511

Turn On/Off Wireless Remote Control function

Turn On/Off Air Pump Sensor

Select DMX mode from 2ch, 1ch, and Sync mode

Turn On/Off W-DMX function

Unlink from a W-DMX transmitter

Interval Set

XXX Sec

Duration Set

XXX Sec

Timer Output

XXX %

Volume Output

XXX %

Fan Speed

XXX %

DMX-512

Address: XXX

W-DMX Power

Wireless

Air Pump Sensor

DMX Mode

XXXX

W-DMX Reset

XXX

Turn On/Off run last setting function

Turn On/Off Keypad Sound

DMX Connector Pin Assignment

The machine provides a 3- or 5-pin XLR connector for DMX connection. The diagram below

indicates pin assignment information.

Function

Ground

Data-

Data+

N/A

DMX Operation

Making the DMX Connection –Connect the machine to a DMX controller or to one of the

machines in the DMX chain. The machine uses a 3-pin or 5-pin XLR connector for DMX

connection, the connector is located on the front of the machine.

Run Last Setting

Keypad Sound

Address Setup –Use control menu to set DMX address. The machine occupies 2 control

channels. The starting address is defined as the first channel from which the machine will

respond to the controller. Always double check to make sure there are no overlapping

channles in order to control the machine correctly.

DMX Channel Function

Channel Mode

Channel

Value

Function

0-4

Faze off

5-255

Faze 1-100%

0-4

Fan 20%

5-255

Fan 21-100%

0-4

Faze off

Fan 100%

5-255

Faze 1-100%

Fan 100%

Sync

0-4

Faze Off

Fan 20%

5-255

Faze 1-100%

Fan 21-100%

Status of W-DMX connection (Optional)

Symbol on the Liquid Crystal Display

Status of W-DMX connection

●

Transmitter assigned, DMX signal received

◎

Transmitter assigned, No DMX signal

⊙

Transmitter link lost or linking to transmitter

○

Transmitter not assigned

Wireless Remote Control Operation (Optional)

The optional wireless remote control system consists of a handheld transmitter and a

receiver on the rear of the machine.

*This menu function is only available when the Optional Wireless Remote Control Add On

Kit is installed:

Turn On/Off Wireless Remote Control function

Optional Wireless Remote Control Add On Kit: WTR-10

*Handheld Transmitter

With the transmitter, it is possible to make haze output via radio signal at maximum

distance of 50 meters. Press the button “A” to produce haze output and press the button “B”

to stop hazing.

Wireless

Andere Handbücher für F-1 Fazer

Inhaltsverzeichnis

Sprachen:

Andere Antari Nebelmaschine Handbücher

Antari

Antari W-508 Bedienungsanleitung

Antari

Antari X FAZER Bedienungsanleitung

Antari

Antari Ip-1000 Bedienungsanleitung

Antari

Antari X-310PRO Bedienungsanleitung

Antari

Antari HZ-350 Bedienungsanleitung

Antari

Antari Fog cooler DNG-100 Bedienungsanleitung

Antari

Antari FT-100 Fire Training Bedienungsanleitung

Antari

Antari Z-80 Bedienungsanleitung

Antari

Antari Z-1200II Bedienungsanleitung

Antari

Antari M-11 Bedienungsanleitung

Antari

Antari WiFi-800 Bedienungsanleitung

Antari

Antari Z-1500 III Bedienungsanleitung

Antari

Antari F-5D Fazer Bedienungsanleitung

Antari

Antari HZ-500 Montageanleitung

Antari

Antari Z-1020 Bedienungsanleitung

Antari

Antari F-6 Bedienungsanleitung

Antari

Antari M-1 Bedienungsanleitung

Antari

Antari W-515 Bedienungsanleitung

Antari

Antari X FAZER Bedienungsanleitung

Antari

Antari M-5 Bedienungsanleitung

Antari

Antari Mobile MB-20 Bedienungsanleitung

Antari

Antari F-450 Bedienungsanleitung

Antari

Antari AF-5X Bedienungsanleitung

Antari

Antari Z-390 Series Bedienungsanleitung

Beliebte Nebelmaschine Handbücher anderer Marken

Boost

Boost BOOST-FOG400LED-BK Bedienungsanleitung

Home Accents Holiday

Home Accents Holiday FM1000-ASH Bedienungsanleitung

EuroLite

EuroLite ZEITGEIST FOG-1200 Bedienungsanleitung

Dyna-Fog

Dyna-Fog CYCLONE ULTRA 2734 Bedienungsanleitung

PROEL

PROEL DRAGO HEAVY PLFD150HY Bedienungsanleitung

Sparklyn

Sparklyn Y846 Bedienungsanleitung

Magicfx

Magicfx CO2 Gun Bedienungsanleitung

Ibiza

Ibiza LSM500LAS Bedienungsanleitung

Venue Lighting Effects

Venue Lighting Effects ULTRA MINI-FOGGER Bedienungsanleitung

High End

High End F-100 Bedienungsanleitung

Chauvet

Chauvet ARENA 2100 FLEX Bedienungsanleitung

Beamz

Beamz F1600 Bedienungsanleitung

Sagitter

Sagitter SG ARS900C Bedienungsanleitung

KISANKRAFT

KISANKRAFT KK-STF-480 Bedienungsanleitung

Orion

Orion OT-U250PP Leitfaden

Beamz

Beamz S2500 Bedienungsanleitung

American DJ

American DJ Dyno-Fog II Bedienungsanleitung

JB Systems

JB Systems FX 1700 Bedienungsanleitung