Aqara Vibration Sensor Bedienungsanleitung
VibrationSensor
Aqara Hub is required to enable Aqara Vibration Sensor to work with
HomeKit technology. See www.aqara.com for more details.
*
This product is for indoor use only.
*
A hub is required.
*
English
Vibration Sensor Quick Start Guide
Aqara Vibration Sensor is embedded with a high precision
acceleration sensor and it detects the vibration and
movement of objects. It communicates with the Hub via
Zigbee protocol. It also works with other smart accessories to
set various smart scenes, such as, local and remote alarm when it
detects glass breaks.
Indicator Light
Reset Button
Long Press for 5s: Reset/Connect to
Network
Single Press: Eective Range Test
Product Introduction
English
Quick Setup
Eective Range Test: Single press the reset button on the
accessory at your desired position. If the Hub makes voice
prompts, it indicates that the accessory can communicate
eectively with the Hub.
Installation
Option 1: Place it directly in the desired position.
If the connection fails, please move the accessory closer to the Hub
and try again.
*
Before activating the accessory, please make sure you
have the Aqara Home app downloaded and Aqara hub
installed.
1.
2. Please open the app, tap“Home”and then tap“+” in the
top right corner to enter“Add Device (Accessory)” page.
Select “Vibration Sensor”, and add it according to
instructions.
Avoid metal surface to maximize signal strength.
*
English
Online Customer Service: www.aqara.com/support
Email: [email protected]
Manufacturer: Lumi United Technology Co., Ltd.
Model: DJT11LM
Dimensions: 36 × 36 × 9 mm (1.42 × 1.42 × 0.35 in.)
Wireless Protocol: Zigbee
Battery: CR2032
Operating Temperature: -10° – +50°C (14°F – 122°F)
Operating Humidity: 0 – 95% RH, no condensation
Maximum Transmit Power (Zigbee): 9.99dBm
Working Frequency: 2400 MHz – 2483.5 MHz
Specications
Keep the surface clean and dry.
*
Remove the protective lm, and stick it to the
desired position.
Option 2:
English
This product is NOT a toy. Please keep children away from
this product.
This product is designed for indoor use only. Do NOT use in
humid environments or outdoors.
Beware of moisture, do NOT spill water or other liquids
onto the product.
Do NOT place this product near a heat source. Do NOT
place it in an enclosure unless there is normal ventilation.
Do NOT attempt to repair this product by yourself. All
repairs should be performed by an authorized professional.
1.
2.
3.
4.
5.
6.
Warnings
This product is only suitable for improving the
entertainment, convenience of your home life and
reminding you about the device status. If a user violates
the product use instructions, the manufacturer will NOT be
liable for any risks and property losses.
FCC ID: 2AKIT-DJT11LM
Federal Communications Commission (FCC) compliance statement:
Address: 8th Floor, JinQi Wisdom Valley, No.1 Tangling Road,
Liuxian Ave,Taoyuan Residential District, Nanshan District,
Shenzhen, China.
Inhaltsverzeichnis
Andere Aqara Zubehör Handbücher
Aqara
Aqara Motion Sensor Bedienungsanleitung
Aqara
Aqara G4 Bedienungsanleitung
Aqara
Aqara Water Leak Sensor Bedienungsanleitung
Aqara
Aqara Door and Window Sensor Bedienungsanleitung
Aqara
Aqara Water Leak Sensor Bedienungsanleitung
Aqara
Aqara FP2 Bedienungsanleitung
Aqara
Aqara MCCGQ11LM Bedienungsanleitung
Aqara
Aqara SJCGQ11LM Bedienungsanleitung
Aqara
Aqara WSDCGQ11LM Bedienungsanleitung
Aqara
Aqara FP2 Bedienungsanleitung
