Ares Sopwith pup Bedienungsanleitung

QUICK-START GUIDE

Full manual available to download from: www.Ares-RC.comFull manual available to download from: www.Ares-RC.com

Product specications are subject to change without notice.

Due to ongoing development, the actual product may vary from

images shown.

This product contains chemicals known to the State of California

to cause cancer, birth defects and other reproductive harm.

This product is not a toy! (14+) Recommended for ages 14 and

up. Adult supervision required for ages under 18 years old.

Contains small parts, keep out of reach of children 3 years of

age and younger.

To download the full Owner’s Manual &

Technical Information Guide, please visit

www.Ares-RC.com or scan the QR code with

your smart phone.

Distributed in the

UK by:

J Perkins Distribution Ltd,

Lenham,

Kent, UK

ME17 2DL.

www.jperkins.com

Distributed in Australia by:

Model Engines (Aust.) Pty. Ltd.,

Unit 1, 158-168 Browns Road,

Noble Park,

Victoria,

3174,

Australia.

www.modelengines.com.au

Ph (03) 8793 5555

[email protected]

Distributed in the US by:

Firelands Customer Service/Product Support

1133 Libra Drive, Lincoln, NE 68512

www.relandsgroup.com

1-800-205-6773

customerservice@relandsgroup.com

Part Number:

AZSA1500 Sopwith Pup Ultra-Micro RTF - Mode 2

AZSA1500M1 Sopwith Pup Ultra-Micro RTF - Mode 1

AZSA1501 Sopwith Pup Ultra-Micro PTF

Quick-Start Guide (RTF & PTF)

MADE IN CHINA

QUICK-START GUIDE

Full manual available to download from: www.Ares-RC.comFull manual available to download from: www.Ares-RC.com

1Carefully remove the transit tape

and the foam retainers, then gently

lift your Sopwith Pup and the other

components from the box.

This Quick Start guide is written for the RTF (Ready to Fly) version of the Sopwith Pup.

A full instruction manual is available to download from www.ares-rc.com

2Ensure you have the following

parts:

• 100% Factory assembled

Sopwith Pup

• 4-channel transmitter with

integral 100mA charger

• 70mAh 3.7V 1S Li-Po battery

• 4x AA cells

3Remove the transmitter battery

cover and insert the four AA

alkaline cells observing the correct

polarity. The cell orientation is

indicated inside the battery box,

4Open the hatch on the lower left

corner of the transmitter. Locate

the charge lead and connect it to

the 70mAh Li-Po, making sure to

align the red dots.

RTF

QUICK-START GUIDE

Full manual available to download from: www.Ares-RC.comFull manual available to download from: www.Ares-RC.com

5With the battery correctly

connected the CHG (charge) light

on the transmitter will glow solid

yellow indicating that it is charging.

Note that it is not necessary to

switch the transmitter on to initiate

charging.

6A fully discharged battery will be

charged in under an hour, at which

point the yellow light will stop

glowing. The battery is now ready to

use and can be disconnected from

the charge lead.

7Pull the throttle stick back to its

lowest point and switch ON the

transmitter.

8Connect the lead on the underside

of the model to the battery

(making sure to align the red dots

as before) and use the magnet

retainer to clip the battery in

position with the plug end facing

the tail.

9Having plugged in the Li-Po the rudder and

elevator control surfaces will move, indicating

that the 3-in-1 control unit has initialized and

that the motor is armed. Raising the throttle

stick will now start the motor. In the unlikely

event that the initialization process fails,

follow the pairing instructions at the back of

this manual.

QUICK-START GUIDE

Full manual available to download from: www.Ares-RC.comFull manual available to download from: www.Ares-RC.com

11 Pull the elevator stick back and

check that the elevator moves in an

upward direction. Push the elevator

stick forward and check that the

elevator moves in a downward

direction.

12 With the propeller clear of

obstructions and the model

restrained, open the throttle

slowly and check that it turns in

an anticlockwise direction, when

viewed from the front.

13 Check that the elevator and

rudder are centered and adjust as

necessary using the transmitter’s

trim buttons.

With the model in front of you,

facing away, move the rudder stick

to the right and check that the

rudder moves right in response.

Left rudder stick will move the

rudder to the left.

Check the control surfaces, as below, noting that instructions for servo reversing are

available in the full online instruction manual at www.ares-rc.com. On this 3 channel

airplane the rudder function is controlled by the aileron stick on the transmitter.

QUICK-START GUIDE

Full manual available to download from: www.Ares-RC.comFull manual available to download from: www.Ares-RC.com

14 Your Sopwith Pup is now ready to

y. Choose a at-calm day for the

rst ight or use a suitable indoor

venue (a sports hall is ideal) that’s

free of obstructions. Note that it’s

not necessary to y the Pup at full

throttle, indeed scale ight and

extended duration are performed

at much lower throttle settings.

We hope you have many enjoyable

ights with with your Sopwith Pup.

Transmitter Pairing

Having followed Steps 1 to 9, in the unlikely event that your Sopwith Pup does not operate

please follow the 3 stage pairing process detailed here:

1Switch the transmitter ON and

connect the ight battery as

detailed in Step 8.

2Simultaneously press the

two throttle trim buttons. The

transmitter will emit a series of

beeps/tones indicating that it has

entered pairing mode. Release

the buttons.

3The pairing process is complete

when the servos (and the rudder/

elevator) move back and forth

briey and the transmitter stops

emitting the beeps/tones. You

should now have full control of

the airplane. Return to Step 10 to

complete the set-up of your model.

QUICK-START GUIDE

Full manual available to download from: www.Ares-RC.comFull manual available to download from: www.Ares-RC.com

1Carefully remove the transit tape

and the foam retainers, gently lift

the components from the box and

ensure you have the following:

• 100% Factory assembled

Sopwith Pup

• 70mAh 3.7V 1S Li-Po battery

• USB charger

2Plug the supplied USB charger into

a suitable port noting that the LED

on the charger will ash red when

connected.

This Quick Start guide is written for the PTF (Pair to Fly) version of the Sopwith Pup.

A full instruction manual is available to download from www.ares-rc.com

3Connect the battery to the charge

lead making sure to align the red

dots. Note that the ashing LED will

now glow solid bright red. Note that

a discharged battery will be charged

in 30 to 50 minutes and can be

seen to be fully charged when the

red LED dims signicantly. When this

happens the battery is ready to use

and can be disconnected from the charge lead.

4Pair your chosen Hitec air

transmitter to the Sopwith’s 3-in-1

control unit. Start by following the

pair / binding instructions supplied

with your Hitec air transmitter

making sure to select the Minima

receiver option when prompted.

Having put your transmitter into

pair/bind mode, connect the battery to your Sopwith Pup to power it ON.

Pairing will now commence. The process being complete when the rudder

and elevator move back and forth briey. Follow your transmitter’s instruction

manual for guidance on exiting the pairing process.

PTF

QUICK-START GUIDE

Full manual available to download from: www.Ares-RC.comFull manual available to download from: www.Ares-RC.com

5With the model in front of you,

facing away, move the rudder stick

to the right and check that the

rudder moves right in response.

Left rudder stick will move the

rudder to the left.

6Pull the elevator stick back and

check that the elevator moves in an

upward direction. Push the elevator

stick forward and check that the

elevator moves in a downward

direction.

7With the propeller clear of

obstructions, open the throttle

slowly and check that it turns in

an anticlockwise direction, when

viewed from the front.

8Check that the elevator and

rudder are centered and adjust as

necessary using the trim buttons

or the subtrim function on your

computer radio.

9Your Sopwith Pup is now ready to

y. Choose a at-calm day for the

rst ight or use a suitable indoor

venue (a sports hall is ideal) that’s

free of obstructions. Note that it’s

not necessary to y the Pup at full

throttle, indeed scale ight and

extended duration are performed

at much lower throttle settings. We

hope you have many enjoyable ights with with your Sopwith Pup.

Full manual available to download from: www.Ares-RC.comFull manual available to download from: www.Ares-RC.com

NOTE: If you experience any problems,

please consult online troubleshooting guide.

Andere Handbücher für sopwith pup

Inhaltsverzeichnis

Andere Ares Spielzeug Handbücher

Ares

Ares Taylorcraft 130 Bedienungsanleitung

Ares

Ares Gamma 370 Pro Bedienungsanleitung

Ares

Ares Gamma 370 Pro Bedienungsanleitung

Ares

Ares Crusader II RTF Handbuch

Ares

Ares Alara Handbuch

Ares

Ares Nanos FP75 Bedienungsanleitung

Ares

Ares CHRONOS CX 75 Bedienungsanleitung

Ares

Ares TIGER MOTH 75 Bedienungsanleitung

Ares

Ares V-Hawk X4 Handbuch

Ares

Ares P-51D Mustang 350 Bedienungsanleitung

Ares

Ares Chronos FP 110 Bedienungsanleitung

Ares

Ares CRUSADER II Bedienungsanleitung

Ares

Ares Decathlon Bedienungsanleitung

Ares

Ares AZSA1700 Bedienungsanleitung

Ares

Ares sopwith pup Handbuch

Ares

Ares Optim 80 CP Bedienungsanleitung

Ares

Ares Gamma Pro V2 Bedienungsanleitung

Ares

Ares Gamma V2 Bedienungsanleitung

Ares

Ares Optim 80 CP Bedienungsanleitung

Ares

Ares Tiger Month 75 Bedienungsanleitung

Ares

Ares GAMMA 370 V2 Bedienungsanleitung

Ares

Ares fokker D.VII Bedienungsanleitung

Ares

Ares V-Hawk X4 Bedienungsanleitung

Ares

Ares Chronos CX 100 Bedienungsanleitung

Beliebte Spielzeug Handbücher anderer Marken

marklin

marklin 37321 Bedienungsanleitung

Canon

Canon PAPER CRAFT Bedienungsanleitung

GREAT PLANES

GREAT PLANES Pitts M-12S Bedienungsanleitung

NOCH

NOCH 14261 Bedienungsanleitung

Hausler

Hausler 450 SE V2 Bedienungsanleitung

Dynaflite

Dynaflite Daydream Bedienungsanleitung

Kenner

Kenner Batman 63651 Bedienungsanleitung

LEGO

LEGO 8527 Bedienungsanleitung

Multiplex

Multiplex EasyStar II Bedienungsanleitung

iKarus

iKarus ECO 8 Bedienungsanleitung

Walkera

Walkera 38 Bedienungsanleitung

Hasbro

Hasbro TRANSFORMERS BUMBLEBEE Bedienungsanleitung

MD MXION SWD Bedienungsanleitung

Mattel

Mattel Disney Pixar Cars Cozy Cone Spiral Rampway Bedienungsanleitung

marklin

marklin 39671 Bedienungsanleitung

LEGO

LEGO TECHNIC 8735 Bedienungsanleitung

Mattel

Mattel HOTWHEELS DWL04 Bedienungsanleitung

REVELL

REVELL Bristol Beaufighter TF.X Bedienungsanleitung

Ares sopwith pup Bedienungsanleitung

Beliebte Spielzeug Handbücher anderer Marken