Argos 3279515 Bedienungsanleitung

White Bunk Bed - 190x90cm

Dimensions

Length - 198cm

Depth - 105cm

Height - 157cm

Weight - 48.5kg

Issue 2 - 03/09/15

Important – Please read these instructions fully before starting assembly

If you need help or have damaged or missing parts, call the Customer Helpline:

0045 7668 8055 or e-mail: order@ﬂexa.dk

Assembly Instructions - Please keep for future reference 3279515

Safety and Care Advice

Important – Please read these instructions fully before starting assembly

• Check you have all the

components and tools listed on

pages 2 and 3.

• Remove all ﬁttings from the

plastic bags and separate them

into their groups.

• Keep children and animals

away from the work area, small

parts could choke if swallowed.

• Make sure you have enough

space to layout the parts before

starting.

• Do not stand or put weight on

the product, this could cause

damage.

• Assemble the item as close

to its ﬁnal position (in the same

room) as possible.

• Assemble on a soft level

surface to avoid damaging the

unit or your ﬂoor.

• Parts of the assembly will be

easier with 2 people.

• We do not

recommend the

use of power

drill/drivers for

inserting screws,

as this could

damage the unit. Only use hand

screwdrivers.

• Dispose of all packaging

carefully and responsibly.

• Only clean using a damp cloth

and mild detergent, do no use

bleach or abrasive cleaners.

• From time to time check that

there are no loose screws on

this unit.

• This product should not be

discarded with household waste.

Take to your local authority

waste disposal centre.

Care and maintenance

IMPORTANT - READ CAREFULLY -RETAIN FOR FUTURE REFERENCE

ASSEMBLY:

Always follow the instruction. Current legislation requires that the high bed / bunk bed must be ﬁtted with 4

safety-rails and a ladder or platform for the upper bunk. The high bed / bunk bed meets the European EN

747:2012 A1:2015 standards for security and durability.

MATTRESS:

This bed is designed to use a mattress size 190 cm long and 90 cm wide. The total thickness must not

exceed 16,1 cm. The mattress top must not pass the marking on the ladder / the post for the safety-rail.

WARNING:

High beds and the upper bed of bunk beds are not suitable for children under six years due to the risk of

injury from falls. Bunk beds and high beds can present a serious risk of injury from strangulation if not used

correctly. Never attach or hang items to any part of the bunk bed that are not designed to be used with the

bed, for example, but not limited to ropes, strings, cords, hooks, belts and bags. Children can be become

trapped between the bed and the wall, a roof pitch, the ceiling, adjoining pieces of furniture (e.g. cupboards)

and the like. To avoid risk of serious injury the distance between the top safety barrier and the adjoining

structure shall not exceed 75 mm or shall be more than 230 mm.

Do not use the high bed / bunk bed if any structural part is broken or missing.

MAINTENANCE INSTRUCTIONS:

Check regulary that all assembly fastenings are properly tightened. Ventilation of the room is necessary in

order to keep the humidity low and to prevent mould in and around the bed.

Components - Parts

Please check you have all the parts listed below

Safety rail 1/1 x2

(186.7x6.5x2.0cm)

Safety rail 3/4 x2

(152.9x6.5x2.0cm)

List for slats x2 (86.3x2.4x1.5cm)

Bedside x4 (186.7x8.9x2.0cm)

Slat x30 (89.7x6.5x1.5cm)

T&G panel x2 (58.5x7.5x0.8cm)

4T&G panel x2 (58.5x8.1x0.8cm)

Ladder side x2

(116.2x8.9x2.0cm)

T&G panel x16

(58.5x9.4x0.8cm)

List f.safety rails x2

(31.8x2.8x1.2cm)

No. 12-01203181-20

If you have damaged or missing components,

call the Customer Helpline: 0045 7668 8055

No. 12-01508632 No. 12-01508971

No. 12-02015291-20

No. 12-02018673-20

No. 12-00805854-20

No. 12-00805855-20

No. 1305-18673-20

No. 12-02011621-20

No. 12-00805851-20

Long leg x4 (81.9x5.5x5.5cm)

Components - Parts

Please check you have all the parts listed below

T&G panel x2 (27.6x7.5x0.8cm)

Endrail curved x4

(86.5x8.9x2.0cm)

11 Tread x1 (31.8x8.9x2.6cm)

Endrail x4 (86.5x6.5x2.0cm)

14 Tread x2 (31.8x6.0x2.6cm)

Short leg x4 (72.7x5.5x5.5cm)

13 No. 12-05507271-20

No. 12-02008651-20 No. 12-02603186-20

No. 12-00802763-20

No. 12-02603181-20

No. 12-02008652-20 No. 12-05508191-20

T&G panel x2 (27.6x8.1x0.8cm)

18 No. 12-00802762-20 T&G panel x16 (27.6x9.4x0.8cm)

19 No. 12-00802761-20

Please check you have all the ﬁttings listed below

M6x100mm Connecting bolt x8

Tools required

Note: The quantities below are the correct amount to complete the assembly. In some cases more ﬁttings

may be supplied than are required.

M6 Ø10x14mm Barrel nut x8

ø4,0x30mm Chipboard screw x76

ø10x50mm Dowel x26

Components - Fittings

Phillips

screwdriver

(medium)

Small

hammer

Ruler/tape

measure

ø4,5x50mm Chipboard x4

Allen key

4mm incl.

Flatblade

screwdriver

(medium)

ø6,3x50mm Assembly screw x10

ø10mm Cover cap plastic x14

ø7mm Cover cap plastic x4ø6,3x90mm Assembly screw x38

ø8mm Cover cap plastic x8

Angle 27,5x17mm x1

ø6,3x70mm Assembly screw x2

ø6,3x22mm Euro screw x1

ø3x20mm Chipboard x4

ø4x40mm Chipboard x10

ø4x25mm Chipboard x1

Ø10x88mm Connecting double bolt x4

No. 3907-63022

No. 3901-30020

No. 3901-40040

No. 3909-63070

No. 4008-020

No. 3903-40025

No. 3934-10088

ø16.8x5mm Cover cap plastic x58

SNo. 3938-00015-2

No. 3901-40030

No. 3930-10050 No. 3901-45050

No. 3922-06014

No. 3913-06100

No. 4033-004

No. 3909-63050

No. 3938-00010-2

No. 3938-00007-2

No. 3909-63090

No. 3938-000081-2

Bracket 20mm x4

No. 4007-024

Assembly Instructions

Step 1

Step 2

Attach the dowels Dto

the tread 12 and to the

bedside 10 and to the

safety rails 7and 9.

It may be necessary

to tap the dowels in

very gently with a small

hammer.

Insert the connecting

double bolts Qto all the

short legs 13 .

Twist/turn the bolt to

follow the hole ø6,8 mm.

Counter sunk 5 mm

hole should face same

direction as bedside

drilling.

Upper bed: Attach

the long leg 16 to the

endrails 11 and 14 with

screws Gusing the allen

key.

Repeat same procedure

for both headboard and

footboard

Ø6,8 mm

Ø5 mm

Ø6,8 mm

Ø5 mm

bedside

drilling

Step 3

Assembly Instructions

Step 4

Upper bed: Slide T&G

panel 17 between

endrails 11 and 14 .

Followed by 8 T&G panel

19 and ﬁnish with 1 T&G

panel 18 .

Attach the long leg 16 to

the endrails 11 and 14

with screws Gusing the

allen key.

Lower bed: Attach the

short leg 13 to the

endrails 11 and 14 with

screws Gusing the allen

key.

Repeat same procedure

for both headboard and

footboard.

Lower bed: Slide T&G

panel 4between

endrails 11 and 14 .

Followed by 8 T&G panel

6and ﬁnish with 1 T&G

panel 5.

Attach the leg 13 to the

endrails 11 and 14 with

screws Gusing the allen

key.

Repeat same procedure

for both headboard and

footboard.

Step 5

Important note:

A variation of the width of the panels of ±2-3%

has to be expected as wood is a live material,

i.e. variation of 2-3 cm per 1 meter.

Leaving some space at the panels, tongue & groove,

should be distributed regularly along the bed end.

If there is too little space for the panels, these should be

acclimatized for 2-5 days in order to adapt to the humidity

of the room.

The reason for this problem might be that the wood has absorbed a little

moisture during transportation/stocking.

Step 6

19 19

Assembly Instructions

Lower bed: Attach the 2

bedsides 10 to the legs

13 ﬁrstly by placing the

dowels in the holes in the

leg.

The thin rail attached to

the bedside should face

inwards.

Push barrel nut Binto

the small holes in the

bedside 10 . The groove

on barrel nut Bshould

be horizontal.

Push connecting bolt A

through each leg 13 to

meet barrel nut Band

then fasten with the allen

key.

Upper bed: Attach the

bedside 10 and safety

rails 9to the legs 16

ﬁrstly by placing the

dowels in the holes in the

leg.

The thin rail attached to

the bedside should face

inwards.

Push barrel nut Binto

the small holes in the

bedside 10 . The groove

on barrel nut Bshould

be horizontal.

Push connecting bolt A

through each leg 16 to

meet barrel nut Band

then fasten with the allen

key.

Attach the safety rails 9

to the legs 16 with the

screws G.

Then fasten with the

allen key.

Step 7

Step 8

Assembly Instructions

Upper bed: Attach the

bedside 10 and safety

rails 7to the legs 16

ﬁrstly by placing the

dowels in the holes in the

leg.

The thin rail attached to

the bedside should face

inwards.

Push barrel nut Binto

the small holes in the

bedside 10 . The groove

on barrel nut Bshould

be horizontal.

Push connecting bolt A

through each leg 16 to

meet barrel nut Band

then fasten with the allen

key.

Attach the safety rails 7

to the legs 16 with the

screws G.

Then fasten with the

allen key.

Ladder can be

positioned left or right!

Attach the 2 beds by

putting the upper bed

(with legs 16 ) in top of

the lower bed (with legs

13 ).

Attach the connecting

double bolt Qin legs 13

with the upper bed by

screws Ethrough legs

16 .

Step 10

Step 9

Ladder can be positioned left or right!

Upper bed

Lower bed

Assembly Instructions

Attach the treads 15 to

the ladder side 8with

assembly screws F.

Attach bracket Rto

the ladder side 8with

screws C.

Attach angle Mto the

ladder side 8with euro

screw O. Push white

cover caps Son all

screws F.

Place the ladder to

the bed sides 10 with

bracket R.

Attach the ladder side 8

to the leg 16 with screw

Attach the ladder side 8

to the safety rails 7with

the assembly screws N.

Push white cover caps S

on all screws N.

Attach the ladder side 8

to the bed sides 10 with

screws P.

Max. mattress height !

Step 11

Step 12

11,5 mm

16 L

Max. mattress

height!

Inhaltsverzeichnis

Andere Argos Inneneinrichtung Handbücher

Argos

Argos Toronto 697/0804 Bedienungsanleitung

Argos

Argos Canterbury 4 DR 6 DRW ROBE Bedienungsanleitung

Argos

Argos Malibu 238/7154 Bedienungsanleitung

Argos

Argos Vancouver II 643/8157 Bedienungsanleitung

Argos

Argos Dalton 246/6422 Bedienungsanleitung

Argos

Argos Habitat Thornbury 343766 Bedienungsanleitung

Argos

Argos Anderson 2 plus 2 Sideboard Bedienungsanleitung

Argos

Argos HOME 607/7446 Bedienungsanleitung

Argos

Argos 266/0709 Bedienungsanleitung

Argos

Argos Amelie 247/9873 Bedienungsanleitung

Argos

Argos Habitat DUO CLIC CLAC 3553657 Bedienungsanleitung

Argos

Argos Hallingford 305/2323 Bedienungsanleitung

Argos

Argos 4FT6 BED FRAME Bedienungsanleitung

Argos

Argos Tolga 323/5164 Bedienungsanleitung

Argos

Argos Messina Steel Bedienungsanleitung

Argos

Argos 459/1591 Datenblatt

Argos

Argos 484/2831 Bedienungsanleitung

Argos

Argos Malibu 256/0029 Bedienungsanleitung

Argos

Argos Scandinavia Bedienungsanleitung

Argos

Argos Wooden Filer Bedienungsanleitung

Argos

Argos 1524853 Bedienungsanleitung

Argos

Argos 147/7584 Bedienungsanleitung

Argos

Argos New Penton Bedienungsanleitung

Argos

Argos Napoli 600/6266 Bedienungsanleitung

Beliebte Inneneinrichtung Handbücher anderer Marken

Homelegance

Homelegance California 1662PEK-1CK Bedienungsanleitung

Osmond Ergonomics

Osmond Ergonomics FLO Bedienungsanleitung

OVE

OVE ELOISE 42 Bedienungsanleitung

overstock

overstock MF286255 Bedienungsanleitung

Sonoma

Sonoma 160-801 Bedienungsanleitung

BOLERO

BOLERO Wicker Side Chair CF158 Installationsanleitung

Coaster

Coaster 4799N Bedienungsanleitung

Stor-It-All

Stor-It-All WS39MP Programmierhandbuch

Lexicon

Lexicon 194840161868 Bedienungsanleitung

Next AMELIA NEW 462947 Bedienungsanleitung

impekk

impekk Manual II Bedienungsanleitung

Elements

Elements Ember Nightstand CEB700NSE Bedienungsanleitung

JWA

JWA CARY 68429 Bedienungsanleitung

VIPACK

VIPACK AMORI AMKB9014 Bedienungsanleitung

Rowico

Rowico SANNA Bedienungsanleitung

Southern Enterprises

Southern Enterprises CK556000TX Bedienungsanleitung

hygena

hygena 314/5041 Bedienungsanleitung

VINNOVA

VINNOVA Kinsley 536060S Bedienungsanleitung